Ttl rs module

Kootek PL USB to Serial TTL UART Module Converter Adapter. A handy USB to TTL converter based on the PLHX.3 LEDs are on-board to indicate power data reception and data transmission. A 5V and 3.3V output is available--you can power your project directly from the USB port so it functions as a USB power supply too. The 5-pin I O is clearly labelled on the board.Excellent driver support--drivers are available for Windows 98 to Windows 7 (32 bit and 64 bit) Mac OS 8 to OS X (32 bit and 64 bit) and Linux. Even Android is supported!

Description Package Includes: 1 Piece new  MAX RS232 Serial Port To TTL Converter Module DB9 Connector 5V, RS232 to TTL It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  MAX3232 RS232 Serial Port To TTL Converter Module DB9 Connector 5V, RS232 to TTL It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description MAX RS232 Serial Port To TTL Converter Module DB9 Connector With Cable Brand new and high quality. It is widely used

Product Description CH340 module / USB switch TTL / USB transfer RS232 / exceed PL / STC Downloader / 9 Brush board STC official download chip. Perfectly compatible with all Series MCU STC will not be because of the different drivers that would lead to problems like PL can not download the program. Ultra-stable.      1, new original CH340G chips, the chips are STC official recommended USB to TTL chips will not appear due to different drive / different computer as a result of incompatibilities! ! !    2, high-quality high-grade yellow pin, pin durable than the black market, beautiful;    3, not only has the power light PWR, there TXD and RXD LEDs, whether the product is easy to learn and intuitive to work

Product Description v   USB to TTL converter/STC microcontroller programmer / PL with a transparent Heat-shrinkable sleeve v   Dimensions: 50mm x15mm x 7mm v   Weight: 15 gms.   Features: v   Adopt imported controller PLHX,which can stabilize the flash with high speed v   500mA self recovery fuse for protection v   Two data transmission indicator, can monitor data transfer status

Buy 3 get 1 free… Product Description v   USB to TTL converter/STC microcontroller programmer / PL with a transparent Heat-shrinkable sleeve v   Dimensions: 50mm x15mm x 7mm v   Weight: 15 gms.   Features: v   Adopt imported controller PLHX,which can stabilize the flash with high speed v   500mA self recovery fuse for protection v   Two data transmission indicator, can monitor data transfer status

Product Description Note Not Genuine IC will have much more error programming. This is a redesigned CP module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic Features: Use SILABS’s CP chip, performance is definitely more than made ​​PL, encroaching FT232RL. Full board design, full-featured interface. With RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS and other full-featured interface. Some boards can’t work with normal CP boards because of the incomplete interface, now it is not a problem anymore. With 500mA resettable fuse   designed to prevent users from burning power pick the wrong computer USB, this is a must. Get hold of the plate board computer motherboard burned more harm than good. With power indicator light. Directly computer USB interface design, you can not use the computer switch wiring or extension cords. Package includes five DuPont line, you can link directly target board. Convenient and flexible. Transmission speed bps easily qualified, definitely more than PL. Borrow computer USB power supply, 3.3V and 5V power output can be provided directly to the user’s target board. Note: RXD TXD Some devices mark is not standard, even if not directly, please cross-connect. Powered by Turbo Lister

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Prolific USB-to-Serial TTL Module Prolific 3v PL-HXD Module. SALIENT FEATURES   USB to serial port   3.3V/5V external power supply   PL, mini USB, UART interface   Compatible with development board interface of ViewTool   Fully open source application

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

PLHX USB to TTL Converter Module Package Included:       2 x PLHX module Power output: 3.3V, 5V Pins:    GND,  TX,  RX,  3.3V,  5V. Can be used for Arduino, texas launchpad etc Can be used to flash your satellite tv receiver, router, set top box, game console Overcurrent Protection The entire board is coated by high quality transparent heat-shrinkable sleeve Two data transmission indicator can monitor data transfer status

Product Description On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication On board  5.08(mm) 2P connector for RS 485 wires. All the pins of the chip are brought out, can be controlled by MCU Working voltage 5V PCB dimension:44(mm)x14(mm) Package contents: 1 x  MAX485 TTL TO RS485 Convertor Module SHIPPING: power Shipping Payment Policy Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

Description Package Includes: 1 Piece new  MAX485 Module / RS- 485 Module / TTL to RS- 485 Converter Module For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  MAX485 Module / RS- 485 Module / TTL to RS- 485 Converter Module For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. INTRODUCTION   Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. with your microcontroller. This module can easily be used with Positron Development Boards.  SALIENT FEATURES This module has 4 pins viz. Receiver, Transmitter, Vcc and Ground These four pins can easily be connected to any of the Transmitter, Receiver, Vcc and Ground of a micro controller development board The module uses MAX232 IC and can be easily connected to your laptop using Positron’s DB9 cables

PLHK USB to TTL Rs232 Description • Built-in TTL COM PC-PLHX Chip  • Standard USB type A male and TTL 4 pin connector  • Cable length: mm ( in)  • Simple and Easy way to give USB support to your designs  • Available for Linux, Mac, WinCE and Windows (XP, ), Vista, Win 7，  • NOT WINDOWS 8 compatible  • Black cable-----GND  • Green cable----TXD  • White cable----RXD  • Red cable ---- VCC (5V)  PL Windows Driver Download Driver PLUSBtoTTL Serial Debugger Module Use 1, install the driver, 2, restart the computer, 3, the module is plugged into the computer's USB port, the system will automatically install the driver 4, the TXD and RXD connected (that is, one with a Dupont line inserted

Connect the USB A to B Cable to USB B socket of the module and USB port of the computer, install drivers and you will be assigned a COM port through which you can communicate as you do through a SERIAL port. You can easily communicate with microcontrollers / microprocessors from your computer through the module. If you need TTL pins for communication, you can find  TX,  RX  and  GND  points on board, solder 3 berg sticks and connect it to TTL pins of microcontrollers for direct communication without DB9 connector (No need to use MAX232 / MAX for RS232 to TTL conversion

  This is a plug and play GSM Modem with a simple to implement RS232, TTL serial and USB interface. It works on frequencies 900/ 1800 MHz. Use it to send SMS, make and receive calls, and do other GSM operations by simple AT commands through a serial interface from microcontrollers and computers. It uses the popular SIM900A module for all its GSM operations. It comes with a standard RS232 interface which can be used to easily interface the modem to microcontrollers and computers. Through USB, the modem can be operated from a computer to send/receive calls, messages, etc    The modem consists of all the external circuit required to start experimenting with the SIM900A module like the power regulation, external antenna, SIM Holder, etc. Features Uses the extremely popular SIM900A GSM module USB communication allows direct communication with computers Provides the industry standard serial RS232 interface for easy connection to computers and other devices Provides serial TTL interface for easy and direct interface to microcontrollers Power, Status and Network LEDs for easy debugging Onboard MIC and Speaker circuits and 3.5mm audio connectors for direct connection to mics and speakers Can be used for GSM based Voice communications, Data/Fax, SMS,GPRS and TCP/IP stack Can be controlled through standard AT commands Module’s operation mode can be controlled through the PWR Key connected to the PWRKEY pin (refer the SIM900A datasheet for more information) Comes with an onboard wire antenna for better reception. Board provides an option for adding an external antenna through an SMA connector The SIM900A allows an adjustable serial baudrate from 1200 to 115200 bps Modem has low power consumption of 0.25 A during normal operations and around 1 A during transmission Operating Voltage: 7 – 15V AC or DC (board has onboard rectifier) Related Documents Stater Guide AT Commands Set   Download Terminal tool for Troubleshooting(winXP/7/8)

Product Description 1x FT232RL USB TO TTL 5V 3.3V Download Cable To Serial Adapter Module For Arduino Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex FT232RL USB TO TTL 5V 3.3V Download Cable To Serial Adapter Module For Arduino Features: 100% Brand new and high quality Material: PCB + Electronic Component Support 3.3V, 5V Main Color: Red Chipset: FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch:2.54mm Module Size: About 36mm(length)*17.5mm(width) Interface: Mini USB Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. This is HC-05 module, you can configure it to use it as master or slave mode by AT-commands. Level logic: TTL level: normal data represented using binary fixed +5 V equivalent to logic "1", 0V is equivalent to logic "0", referred to as a TTL signal system is the positive logic Package Content: 1 x HC-05, master-slave Bluetooth Module (Arduino compatible) 1 x AT commands Manual (by email) Voltage Requirement: Maximum Voltage 5V, can be used directly with any 5V microcontrollers.

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built