Usb rs232 ttl

PLHK USB to TTL Rs232 Description • Built-in TTL COM PC-PLHX Chip  • Standard USB type A male and TTL 4 pin connector  • Cable length: mm ( in)  • Simple and Easy way to give USB support to your designs  • Available for Linux, Mac, WinCE and Windows (XP, ), Vista, Win 7，  • NOT WINDOWS 8 compatible  • Black cable-----GND  • Green cable----TXD  • White cable----RXD  • Red cable ---- VCC (5V)  PL Windows Driver Download Driver PLUSBtoTTL Serial Debugger Module Use 1, install the driver, 2, restart the computer, 3, the module is plugged into the computer's USB port, the system will automatically install the driver 4, the TXD and RXD connected (that is, one with a Dupont line inserted

Product Description CH340 module / USB switch TTL / USB transfer RS232 / exceed PL / STC Downloader / 9 Brush board STC official download chip. Perfectly compatible with all Series MCU STC will not be because of the different drivers that would lead to problems like PL can not download the program. Ultra-stable.      1, new original CH340G chips, the chips are STC official recommended USB to TTL chips will not appear due to different drive / different computer as a result of incompatibilities! ! !    2, high-quality high-grade yellow pin, pin durable than the black market, beautiful;    3, not only has the power light PWR, there TXD and RXD LEDs, whether the product is easy to learn and intuitive to work

Order more than one piece to save shipping cost. You can contact us at +91 for any question or concern. Kit Details Supports 5v and 3v output voltages Works Best With Winxp, Works under Win7 Do not Supports Win8 or Win8.1 Package Include Package: 1x USB to RS232 TTL PLHX Chip Auto Converter Adapter About Us We are a small company based

1 x USB to TTL / USB-TTL /STC microcontroller programmer / PL Chip Rev A  -  USB to TTL / USB-TTL /STC microcontroller programmer / PL

Product Description v   USB to TTL converter/STC microcontroller programmer / PL with a transparent Heat-shrinkable sleeve v   Dimensions: 50mm x15mm x 7mm v   Weight: 15 gms.   Features: v   Adopt imported controller PLHX,which can stabilize the flash with high speed v   500mA self recovery fuse for protection v   Two data transmission indicator, can monitor data transfer status

Buy 3 get 1 free… Product Description v   USB to TTL converter/STC microcontroller programmer / PL with a transparent Heat-shrinkable sleeve v   Dimensions: 50mm x15mm x 7mm v   Weight: 15 gms.   Features: v   Adopt imported controller PLHX,which can stabilize the flash with high speed v   500mA self recovery fuse for protection v   Two data transmission indicator, can monitor data transfer status

PLHX USB to TTL UART Converter Module Description: Adopt imported controller PLHX,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status

NOTE: DIY_IOT_SHOP is on vacation from 8-11 May, orders made on these days will be shipped only after 11-May. PLHX USB to TTL UART Converter Module Description: Adopt imported controller PLHX,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status

Product Description Note Not Genuine IC will have much more error programming. This is a redesigned CP module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic Features: Use SILABS’s CP chip, performance is definitely more than made ​​PL, encroaching FT232RL. Full board design, full-featured interface. With RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS and other full-featured interface. Some boards can’t work with normal CP boards because of the incomplete interface, now it is not a problem anymore. With 500mA resettable fuse   designed to prevent users from burning power pick the wrong computer USB, this is a must. Get hold of the plate board computer motherboard burned more harm than good. With power indicator light. Directly computer USB interface design, you can not use the computer switch wiring or extension cords. Package includes five DuPont line, you can link directly target board. Convenient and flexible. Transmission speed bps easily qualified, definitely more than PL. Borrow computer USB power supply, 3.3V and 5V power output can be provided directly to the user’s target board. Note: RXD TXD Some devices mark is not standard, even if not directly, please cross-connect. Powered by Turbo Lister

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

PLHX USB to TTL Converter Module Package Included:       2 x PLHX module Power output: 3.3V, 5V Pins:    GND,  TX,  RX,  3.3V,  5V. Can be used for Arduino, texas launchpad etc Can be used to flash your satellite tv receiver, router, set top box, game console Overcurrent Protection The entire board is coated by high quality transparent heat-shrinkable sleeve Two data transmission indicator can monitor data transfer status

Features of the Board ·         The board has adopted controller PLHX,which can stabilize the flash with high speed ·          500mA self recovery fuse for protection ·          Two data transmission indicator can monitor data transfer status

Connect the USB A to B Cable to USB B socket of the module and USB port of the computer, install drivers and you will be assigned a COM port through which you can communicate as you do through a SERIAL port. You can easily communicate with microcontrollers / microprocessors from your computer through the module. If you need TTL pins for communication, you can find  TX,  RX  and  GND  points on board, solder 3 berg sticks and connect it to TTL pins of microcontrollers for direct communication without DB9 connector (No need to use MAX232 / MAX for RS232 to TTL conversion

It's HC-06 bluetooth module it acts only as slave. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

Product Description The USB to RS232 module based TTL provides the best and convenient way to connect your RS232 TTL Devices or demo board to your PC via the USB port. Supports the following Windows OSes: Windows 98SE Windows ME Windows SP4 Windows XP SP2 and above ( bit) Windows Server bit) Windows Server R bit) Windows Vista ( bit) Windows bit) NOTE: For Windows 7, please use RC build or above.  Windows operating system above Windows 7 are not supported. Adopt imported controller PLHX,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status

PL USB To RS232 TTL Converter Adapter Module with  Dust-proof Cover PLHX A Description: Adopt imported controller PLHX,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status

Package Contents 1 x USB to TTL / USB-TTL /STC microcontroller programmer / PL Chip Rev A -  USB to TTL / USB-TTL /STC microcontroller programmer / PL