X camera hot shoe

HOT SHOE COVER PROTECTOR FOR CANON and NIKON New generic Camera Flashlight Hot Shoe Spirit Level Cover, Black Quantity: 1 This camera flashlight hot shoe cover with spirit level protects the interior from debris while allowing you to position your camera perfectly Keeps the hot shoe clean, and safe from scratches and moisture Mini level allows you to strategically angle your camera for the straightest shots Fits securely over the hot shoe Material: Plastic / rubber Color: Black Compatible with: Canon DSLR Nikon D series - D D D D40 D50 D60 D80 D90 D Pentax Olympus Samsung  Fuji  SHIPPING Shipping is within the time specified at the top of the listing to the India ONLY. No International Shipping at this time. Item will be sent via 1st class post. PAYMENT POLICY We accept the payment by safest mode of payment via Paisa Pay only

Hot Shoe cover protector for Canon and Nikon New generic Camera Flashlight Hot Shoe Spirit Level Cover protects the interior from debris while allowing you to position your camera perfectly and keeps the hot shoe clean and safe from scratches and moisture Material: Plastic / rubber Compatible with: Canon DSLR Nikon D series - D D D D40 D50 D60 D80 D90 D Pentax Olympus Samsung  Fuji  SHIPPING Shipping is within the time specified at the top of the listing to the India ONLY. No International Shipping at this time. Item will be sent via 1st class post. Always email us at  if you have any queries. PAYMENT POLICY We accept the payment by safest mode of payment via Paisa Pay only

Title SUPER BRAND Description: Introduction ： It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. Specifications ： Hot Shoe Cover x1 Suitable For ： NIKON: D40 D40X D50 D60 D70S D70 D80 D90 D200 D300 D700 D2 D2x D3 D3x Fujifilm S3 Pro, S5 Pro Compatible DSLR/SLR: Canon Samsung PENTAX, OLYMPUS Note:this Cover don't fit  Sony and Minolta Camera    

Introduction ： It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. Specifications ： Hot Shoe Cover x1 Suitable For ： NIKON: D40 D40X D50 D60 D70S D70 D80 D90 D200 D300 D700 D2 D2x D3 D3x Fujifilm S3 Pro, S5 Pro Compatible DSLR/SLR: Canon Samsung PENTAX, OLYMPUS Note:this Cover don't fit  Sony and Minolta Camera    

TITLE Title   Description: Introduction ： It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. Specifications ： Hot Shoe Cover x1 Suitable For ： NIKON: D40 D40X D50 D60 D70S D70 D80 D90 D200 D300 D700 D2 D2x D3 D3x Fujifilm S3 Pro, S5 Pro Compatible DSLR/SLR: Canon Samsung PENTAX, OLYMPUS Note:this Cover don't fit  Sony and Minolta Camera     hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback       Octroi if applicable

Neewer Black P-TTL Flash Hot Shoe Converter with PC port for Sony DSLR Cameras and Flashes The flash hot shoe adapter is specially designed to connect standard shoe flashes to the proprietary hot shoes. This will allow you to accept flash or accessory having a standard shoe. Features: It provides a standard PC connection. With this adapter, you can expand your speedlite as mobile flash for your camera. (PC extension cable NOT INCLUDED) Securely mounts to camera hot shoe and easy installation / uninstallation. Supports TWO speedlite flashes working together via PC port + standard hotshoe port Supports P-TTL Specifications: Color: Black Size(mm): 34.5 x 28 x 19.7 Triggered by: Camera-top andamp; PC port Suitable for: Sony Version cameras and all PC-PORT Supported flashes IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

HTML TEMPLATE-LISTING   *** BEST PRICE *** BEST QUALITY *** LIMITED STOCK *** ORDER NOW *** BEST PRICE *** BEST QUALITY *** BUY IT NOW ***   TRIPOD BALL HEAD 1/4" KIT WITH SWIVEL FLASH/HOT SHOE MOUNT - MULTI-PURPOSE TRIPOD BALL HEAD Professional Ball Head – Free Shipping All India PRODUCT DESCRIPTION: 100% Brand New High Quality.   Professional Tripod Ball Head.  It's simply professional and affordable.   Suitable for all kinds of 1/4 screw and hot shoe accessories.  Can be connected to the fill light, lead flashing, photographic equipment type lamps, tripods, and monopods.  Can be connected to the camera hot shoe above for digital, DSLR cameras.   Independent adjustment knobs for precise locking, panning and tension controls.   Each adjustment knob is intuitively positioned, positive to the touch and allows for exact camera positioning.   360-degree panning.  Accurate panoramas can easily be stitched together using the graduated panning scale.  Pan movements can be securely locked

HD-126-LED Camera Video DV Camcorder Hot shoe Light for Canon Nikon Sigma Pentax;; 　 　   Description: High quality, imported LED lighting wafers Long lifespan (up to hours) Highly efficient, power-saving, low energy consumption Stable color temperature after long periods of use Automatic IT circuit control support Utilizes imported IC technology Large brightness range Low power consumption Input: DC 7.2V~8.4V Maximum Maximum Power: 9.6 Watt Color: See Picture. Temperature:K (K/filter) Average Service Life: hours Luminous flux:660 lm Runtime:mins Illumination: 900Lux (1m), 240Lux (2m), 120Lux (3m), 70Lux (4m), 40Lux (5m)   Compatible with five different kinds of battery: Panasonic D series (D08S 、 D16S 、 D28S 、 D54S) Sony FM series (FM50 、 FM55H 、 FM500H 、 QM71D 、 QM91D) F series （ F550 、 F570 、 F770 、 F960 、 F970) FV series （ FV50 、 FV70 、 FV90) FH series （ FH50 、 FH60 、 FH70 、 FH90 、 FH100) and AA battery   Easy to know the battery capacity: press the test button, 6-LED On means battery full,1-LED On means battery low There are three filters with this item, with Spotlight effect, Diffuse effect, and for reducing the color temperature to k Rotate switch be use to on/off and adjust the brightness Size:14cm x 9.5cm x 5.6cm - 5.51inch x 3.74inch x 2.2inch   Usage: Application: Video taking, either for lights setup or supplement. Test: Press the bottom for checking the charge capacity of battery, the indicator lighting for charge capacity of battery will be on. When all of the indicator lights are on, the charge capacity is full. Use: Insert hot shoe of LED video light on base of hot shoe of camera or camcorder, turn on the LED video lighting, then you  can start picture or video taking.   Suitable for: Can be installed on All Standard ISO hot shoe Cameras like Canon 、 Nikon 、 Sigma Olympus 、 Pentax, etc. Installed on Canon 、 PANASONIC 、 HITACHI 、 JVC 、 SAMSUNG 、 FISHER 、 and other Camcorders.   Package Included: 1 x LED Video Lighting 3 x Filters (soften diffuser 、 yellow filter 、 pink filter)

Title  brand super      Product Description                                                                                                     Camera Flashlight Hot Shoe Spirit Level Cover   This camera flashlight hot shoe cover with spirit level protects the interior from debris while allowing you to position your camera perfectly. Keeps the hot shoe clean, and safe from scratches and moisture Mini level allows you to strategically angle your camera for the straightest shots Fits securely over the hot shoe   Material: Plastic / rubber Color: Black Fit For: Canon, Nikon, Pentax, Olympus, Fuji, Hasselblad, Mamiya and so on... Note: Does not apply to Sony !!!   Products Include: Hot Shoe Spirit Level Cover  = 1 pcs

Neewer Mini Ball Head with Lock and Hot Shoe Adapter Camera Cradle Features: This ball head adapter fits onto a standard accessory shoe and locks into position Includes a standard 1/4 tripod thread post Ball head can be adjusted into most any position Use to mount accessories onto a flash bracke t Specifi cations: Color: Black W eight: 2.3 oz Package Size: 6.5 x 4 x 2.5 cm IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer® Black Flash Hot Shoe Converter Auto-lock Accessory Shoe Adapter for Multi-interface Shoe, Works with Sony RX1, NEX-6, A58, A99, A7, A7R Product Features This shoe adapter allows you to use auto-lock shoe-compatible accessories with cameras and camcorders that feature a new multi-interface shoe. Works with RX1, NEX-6, A58, A99, A7, A7R. The adaptor is lightweight and locks tightly for a secure fit. Description Features: This shoe adapter allows you to use auto-lock shoe-compatible accessories with cameras and camcorders that feature a new multi-interface shoe. Works with RX1, NEX-6, A58, A99, A7, A7R. The adaptor is lightweight and locks tightly for a secure fit. Specifications: Material: Plastic Color: Black Weight: 0.8oz/22.7g Package Contents: 1x Hot Shoe Adapter Note: Camera and Flash not included. Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

V shape Triple Mount Hot Shoe Flash Bracket for Speedlite Camera Microphone Sync Using this bracket, you can attach UP TO THREE accessories to your camera, like a microphone, video light and monitor, etc. simultaneously. ·2 Standard Flash hot Shoe Mounts,1 Female 1/4" thread mount ·7.5" wide, 6" tall ·1/4" Threads on the bottom could mount on standard light stands 1/4" ·Allows you to attach extra hot shoe accessories to your camcorder ·Made of solid black aluminum

Neewer FC-5P Hot Shoe Adapter Wireless Flash Controller for Canon Nikon Olympus Pentax Based on the photoelectric principle masterflash can remote the slave flash which connects on this item and achieve syncflash. This Flash Hot Shoe Adapter willassist you to achieve your desired shooting effect. With small volume,good-looking exterior and reliable performance for long-term use, it providesconvenience for photographers. It is lightweight for easy carry. With favorableprice, it will be good choice for each economical shopper who doesn't compriseon the quality. Action is better than excitement! Don't hesitate to bring ithome now! andnbsp; Specification: Remote distance: Master flash GN/2 meter Output port: Standard hotshoe adapter PCsync terminal Input port: Camera standard hot shoe adapter IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Title super brand NIKON TTL SHOE EXTENSION TO USE FLASH OFF THE CAMERA LENGTH FOLDED 12" EXTENDED MAXIMUM 70" NIKON Shoe Cord is developed for off camera flash photography. It has a multiple contact pins to use compatibly with cameras which have hot shoe contact listed below. No conversion switch is required for respective cameras. Off camera TTL flash photography is possible up to 180cm maximum. How To Use Note: When placing or removing the flash unit, make sure to swift it off. 1. Using one flash 1-1.Slide the Mounting Foot into the Off Camera TTL Shoe. Lock the foot of your flash if it has a lock system. 1-2. Turn the flash on, and it’s ready to shoot when the read light comes on. Enjoy off camera flash photography as examples shown. And then: 1-2-1. Placing the flash unit on the camera braket 1-2-2. Holding the flash unit by one hand and set it away from the camera. 1-2-3. Mounting the flash unit on the tripod. Suitable for Cameras: Nikon i-TTL hotshoe cameras Suitable for Flashes: Nikon flashes corresponding to i-TTL system Nikon Film-based Camera: Nikon F6, F5, F4-series, F100, F90X/N90s, F80-series/N80-series, F75-series/N75-series/N65-series, F60-series/N60, F50-series/N50, Pronea600i/6i, F801/Ns, F-601/N, F601M/N, F-501/N, F401x/N, F-401x/Ns, F-401/N, F-301/N, FM3A, FA, FE2, FG and Nikonos-V Nikon DSLR Camera: D2Xs, D2X, D2Hs, D2H, D1X, D1H, D1, D300, D200, D100, D80, D90, D200, D300, D3, D70s, D70, D50, D40x & D40 Nikon Flash: SB-800, SB-600, SB-140, SB-50DX, SB-30, SB-27, SB-23, SB-22, SB-22s, SB-21B, SB-20, SB-15, SB-14, SB-11 Octroi if applicable

Neewer V shape Dual Mount Bracket Hot Shoe for Video Lights and Microphones on Cameras and Camcorders Features： Using this bracket, you can attach additional accessories to your camera, like a microphone and video light, simultaneously Allows you to attach extra hot shoe accessories to your camcorder 1/4" Threads on the bottom could mount on standard light stands 1/4" Made of solid black aluminum Two hot shoes NOTE: The bracket only, Video light, microphone, and camera not included IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

NEEWER® Black Hot Shoe Adapter for Sony Cameras to apply a Canon / Nikon / Pentax / Panasonic Version Flash Product Features The flash hot shoe adapter is specially designed to connect speedlite flashes to your camera. This will allow you to accept flash or accessory having a standard shoe. Securely mounts and easy installation / uninstallation. EAN - UPC- Shipping Policy                                                                       a. If the product(s) is not accepted by you when shipped then the amount advanced shall be forfeited. b. Please ensure that your shipping and billing information is correct (including email address and contact numbers). You agree that if the billing/shipping instructions provided by you are incorrect

Neewer Silver Metal Hot Shoe Thumb Up Grip for Fujiflim Finepix X100 Features: Designed for easier handling with your interchangeable lens digital camera. Designed to offer a secure grip while maintaining all the normal features and functions of the Camera. Can make it convenient to place the thumb directly over the control wheel. Small and light, does not snag on straps or clothing, ergonomic shape gives more grip for less effort. Specifications: Suitable for: Fujifilm FinePix X100 Material: Metal Color: Silver Weight: 0.21oz/5.95g Installation Tips: Attach grip pad on the bottom side of the grip. After putting the grip on the hot shoe plate and then fasten it with a wrench tightly. After finising an installation. Note: Even if you don't attach a grip pad there is no problem when using the grip. but we recommend you attach the grip pad

Neewer FA-1S Flash hot shoe adapter for Sony NEX-3, Nex-C3, Nex-F3, NEX-5, NEX-5N 5R and other SONY NEX Camera Series Neewer FA-1S hotshoe adapter is designedfor use with the SONY NEX cameras inbuilt Smart Accessory Terminal. Thisadapter enable users to attach any wireless trigger system or flash unit ontothe SONY NEX cameras. This Flash Hot Shoe Adapter will assist youto achieve your desired shooting effect. With small volume, good-lookingexterior and reliable performance for long-term use, it provides conveniencefor photographers. It is lightweight for easy carry. With favorable price, itwill be good choice for each economical shopper who doesn't comprise on thequality. Action is better than excitement! Don't hesitate to bring it home now! The hotshoe mount is designed to fire your flashes with a proper radio trigger attached. While it is possible to attach a flash unit directly onto the hotshoe, it is not recommended as the weight of the flash may not be fully supported by the mount. Suitable for: SONY NEX Camera,such as Sony NEX-3, Nex-C3, Nex-F3, NEX-5, NEX-5N 5R etc. Note: If it is used

This Two-Axis Hot Shoe Bubble Level from Vello mounts onto any standard hot shoe on an SLR camera. It allows you to precisely align the camera on two planes to ensure that the horizon line is absolutely straight. This is a necessary accessory for QTVR shooting sessions for landscapes or any other photography requiring fidelity to a horizon line or other straight-line elements.

Neewer Universal Black Metal Adjustable Flash Hot Shoe Mount Adapter with 1/4"Tripod Screw Description: This Adjustable Shoe Mount Bracket would be a great addition to your studio. The adapter provides you with full control for positioning your flash by using the easy to adjust wingnuts. With the built-in umbrella holder at the base you can have portable studio lighting without the hassle. The adapter can be attached to your light stand. You can also insert your flash unit and umbrella. You can also adjust your mount so it creates the perfect angle for getting great photographic results. Features: Made from aluminum alloy Fits on the top of most standard light stands or tripods Holds any standard flash Includes umbrella holder at the base of the mount Easy to adjust the angle of the flash Specifications: Size: 4.0x2.6x1.8cm / 1.6"x1.0"x0.7" Weight: 0.99 oz / 28g Directions: Hold the flash with its front facing the same direction as the front of the camera body. Line up the flash's mount with the accessory shoe mount and slide the flash mount, starting at the back side of the camera and pushing forward. You will need to press firmly until the flash will slide no further. Secure the flash into place using its locking mechanism, which will either twist or have a lever that pulls from one side to the other. Turn on the camera and make sure the flash icon shows up when you look through the viewfinder. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

The Kirk SL-1 Double-Axis Hot Shoe Bubble Level mounts effortlessly into the hot shoe of any standard 35mm SLR camera to help achieve a finer degree of accuracy

Commodity introduction:   High Quality!  Brand New !!! This Adapter can convert 1/4" screw to hot shoe mount, you can connect two DSLR camera by this samll accessory For example, you can connect two canon DSLR camera or you can connect a trigger which have a 1/4" screw with flash hotshoe bracket   Materiel: Aluminum Metal   Package Contents:       screw to Flash Shoe Mount Adapter  hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback

Neewer Camera Accessories Hot Shoe Handle Hand Grip for Fujifilm XE1 X-E1 New Camera Accessories Hand Grip for Fujifilm XE1 X-E1 Brand New!! Color: Silver For Fujifilm X-E1 Digital Camera IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

DV Camera Camcorder 160 LED Video Light           Features and Specifications:   It consists of 160 pieces highlighted LEDs, with mighty power and balanced luminance. Matched with a diffuser and two filters, it can adjust the color temperature of the light. With shoe adapter, it can be used to connect the LED lighting  and   camera   apparatus.    The light can be rotated 360 degree. With DC port(110V-220V)  With indicate LED light to show the present power level.   Specifications:   Color: Black LED quantity: 160 piece  Voltage: 7.2V-8.4V Color temperature: K Luminance:  Item weight: 300g Item size: 5.5cm * 2.5cm * 3.5cmcm Package size: 5.5cm * 3cm * 4cm   Suitable for:   Can be installed on All Standard ISO hot shoe Cameras like Canon,  Nikon, Sigma Olympus, Pentax,PANASONIC, HITACHI,JVC, SAMSUNG, FISHER  Camcorders. Package Contains: 160 LED Video Light x 1  Milky White diffuser filter x 1  Yellow diffuser filter x 1  Blue diffuser filter x 1  Universal hot shoe bracket x 1 Mini tripod stand for this light x 1

Title Camera Universal C Type Bracket Camera C Mount Video Light Flash Light  Flash Mount C-shaped Bracket Grip with Double Hot Boot s     Product Features:   1. C type bracket can be mounted camera lights + Flash with no hot shoe for the camera / camera using 2. Camera universal C type bracket 3. More humane design, correct the shortcomings of the straight connection frame, camera display can better open! And you can install multiple camera lights and other accessories. 4. Adapter for camera and camera head can be hand-held or flexible use of the handle, the convenient cameraman photography. Camera switching applications but also for no shoe interface.   Package Include:   1 x  Camera C Mount Video Light Flash Light with Double Hot Boot s       This listing is for only C bracket no light or camera or any other axccessoery is included   hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback       Octroi if applicable

Title Description Specifications: Size: approx. 150x190x100mm 3 Standard Flash hot Shoe Mounts 1/4" Threads on the bottom could mount on standard light stands 1/4" Allows you to attach extra hot shoe accessories to your camcorder Made of solid black aluminum Product Included: Triple Mount Bracket x 1 Note: Pls allow 2-3cm differences due to manual measurement, and CHECK the size before ordering, thank you!   hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback       Octroi if applicable