X parallel lcd module

LCD display module with blue backlight. Wide viewing angle and high contrast. Can display 2-lines * 16-characters. Small and light appearance, easy and convenient to use. Specifications  LCM type: Characters Character type: 16 * 2 Screen size: cm Character size: mm Driving voltage: 5V DC Backlight: Blue Working temperature: 0 - 50°C For technical assistance (connection diagrams, technical videos, documentation, tutorials), order, shipping issues please email us at . We will try all possible and reasonable means to assist you.

Feature ERMSYG-6 is lcd module ks, RoHS, -20°C to +70°C 6:00, Neg Voltage Generator,Parallel and Serial Interface,ST Controller,Popular Size Attribute Gross Weight (kg) Manufacturer EastRising Series Number ERM Part Number(Order Number) ERMSYG-6 Connection Pin Header Display Format 128x64 Dots Sunlight Readable Yes Touch Panel Optional No Outline Dimension 93.0(W)x70.0(H)x12.5(T)mm Visual Area xmm Active Area (W)x(H) Character Size No Diagonal Size 2.9” Dot (Pixel) Size 0.48x0.48mm Dot Pitch 0.52x0.52mm IC Package COB IC or Equivalent ST Interface -bit Parallel, -bit Parallel, 3-Wire Serial SPI Display Type STN-LCD Yellow Green Response Time(Typ) No Contrast Ratio(Typ) No Colors No Viewing Direction 6:00 Viewing Angle Range No Appearance Dark Blue on Yellow Green Brightness(Typ) No Backlight Color Yellow Green Color Backlight Current (Typ) 60mA Power Supply(Typ) 3.3V Supply Current for LCM(Max) 6mA Operating Temperature -℃ Storage Temperature -℃

Product Description Pin define: 1. RST - Reset 2. CE - Chip Select 3. DC - data/instruction selection 4. DIN - serial data line 5. CLK - Serial Clock Line 6. VCC - power input (3.3v or 5v) 7. BL - backlight control 8. GND - Ground Package includes: 1 x LCD module Other Product You Might be Interested

Product Specification LCD size 7.0 inch(Diagonal) Interface Parallel RGB 8 bits Resolution  x 3(RGB) x 600 Driver element a-Si TFT active matrix Dot pitch 0.05(W) ×0.15(H) mm Connections to Banana Pi 40 Pin FPC to the Display Sensor Interface (DSI) Surface treatment Glare Color arrangement RGB-stripe View direction 6 O’Clock Power 5V/550mA Active area  (W) × 90.0H) mm

Product Specification LCD size 5.0 inch(Diagonal) Interface Parallel RGB Resolution 800 x 3(RGB) x 480 Driver element a-Si TFT active matrix Dot pitch (W) ×(H) um Connections to Banana Pi 40 Pin FPC to the Display Sensor Interface (DSI) Surface treatment Glare Color arrangement RGB-stripe View direction 6 O’Clock Power 5V/400mA Active area  (W) × 64.8(H) mm

FREE BERG STRIP This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD parallel interface chipset. Interface code is freely available. You will need atleast 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Specification    ·       Supply Voltage: 5V    ·       Low Power Consumption    ·       Built-in Green Backlight Package    ·       1x 16x2 Green LCD ·         ·    1x 16 PIN Berg Strip

LCD Board Keypad Shield Blue Backlight For Arduino LCD Duemilanove Features: Specification: Brand new and high quality. This is a basic 16 character by 2 line black-on-green display. Utilizes the extremely common HD parallel interface chipset. Interface code is freely available. Blue Backlight with white words. uses 4 Bit Arduino LCD Library. Size:8cm x 5.9cm - 3.15inch x 2.32inch. Images Click here to check out our other products

Features: Brand new and high quality This is a basic 16 character by 2 line black-on-green display Utilizes the extremely common HD parallel interface chipset Interface code is freely available Blue Backlight with white words uses 4 Bit Arduino LCD Library Size: 8cm x 5.9cm (L x W) Package Contents: 1 x  LCD Board Keypad Shield Shipping through DTDC/Aramex/FedEx        = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

Item specifics Product Description Specification: Note: 1. /"LIGHT/" linked with GND, the backlight to be lit. 2. Need you to compress the screen and PCB tighter, might got loose after the delivery. 3 Use a 3.3V controller, otherwise the display could be quite vague. LCD Module:   Power supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested? Data interface level:2.7-5V? Backlight power supply voltage:highest 3.3V? Module size:43.6mm x 43.1mm(width X height)? Installation diameter:2mm? Backlight:White Document for Download:Data 1RST--------- reset? 2CE------------chip selection? 3DC-----------data/commands choice? 4DIN-----------serial data line? 5CLK------------serial Clock Spee 63.3V------------VCC? 7LIGHT--------- backlight control terminal? 8GND-----------power negative Features: 84 X 84 dot matrix LCD,can show 4 lines of characters Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small Low power supply,the working current

Sound Sensor High Sensitivity Sound Detection Module for Arduino Features: 1.84 X 84 dot matrix LCD, can show 4 lines of characters 2.Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND. 3.Support different types of MCU, such as the arduino, AVR, SPI, MCS51 and so on. 4.Transfer rate up to 4Mbps, can full speed write display data without waiting time. 5.Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace. 4.LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small 5.Low power supply,the working current in normal situation is lower than 200μA,and has power-down mode Connections: 1.RST--------- reset 2.CE---------- chip selection 3.DC---------- data/commands choice 4.DIN--------- serial data line 5.CLK--------- serial Clock Speed 6.3.3V-------- VCC 7.LIGHT------- backlight control terminal 8.GND--------- power negative Specifications: 1.For Nokia 5110 3V-5V 2.Module size: 45.2mm x 43.1mm Package included: 1x LCD Module for Nokia 5110 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

1.44 TFT Nokia LCD module Description Description:  • 1.44-inch screen with SPI serial backplane module, a minimum of only four IO-driven resolution   • Spike NOKIA , perfect upgrade true color  • Size: 1.44 inch SPI serial bus  • Resolution Package Info 1 X Pc Nokia LCD Module Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

Package Includes:         1 pc X 0.96 inch OLED LCD module Features No backlight, the display unit can be self-luminous High resolution: Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc. (a lot of routines for reference) Ultra-low power consumption: full screen lit 0.08W, normal full-screen characters 0.06W (far below the TFT, LCD and other technologies) Wide voltage support: without any modification, directly supports 3V ~ 5V DC Working temperature: - ℃ IO port occupies minimal display: The IIC communication, as long as the two IO ports will be able to drive! Note:   I f you decide to buy OLED displays, you have to confirm you can make it work, we are going to provide limited support.

3.2'' TFT LCD Touch Shield for Arduino Mega compatible SAME DAY SHIPPING 100% TESTED PRODUCT, SATISFACTION GUARANTEED. Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

3.2'' TFT LCD 240x400 HD Touch Shield compatible with Arduino Mega Software driver Library AVR included. Product Summary: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. 3.2” Diagonal display 240x400 Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x400 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC HXA Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm               Features: v   240x400 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive LCD with arduino mega card v   Powerful   HXA controller with 240x400 screen resolution.     Package Include: v   A 3.2” LCD TFT 240x400 touchscreen display attached adaptor PCB with SD slot. v   A plastic container box. v   A stand-alone software library(ATmega32)-zip file via e-mail.   Shipping Details: Our preferred shipping partners are                              Indian speed post Testimonial s: v     we never dispatch even a single product without testing at our facility, watch what our customers say about us at our feedback profile Feedback v     In case you find any problem

3.2'' TFT LCD Touch Shield for Arduino Mega compatible     Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem