Yamaha stereo integrated

YAMAHA CA-700 VINTAGE MASTER Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 30kHz Total harmonic distortion: 0.05% Damping factor: 50 Input sensitivity: 4mV (mic), 3mV (MM), 200mV (line) Channel separation: 50dB (MM), 50dB (line) Output: 200mV (line), 30mV (DIN), 0.775V (Pre out) Dimensions: 400 x 300 x 140mm Weight: 10kg

Specs: Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: % Damping factor: 240 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM), 110dB (line) Channel separation: 50dB (line) Output: 150mV (line) Dimensions: 435 x 151 x 391mm Weight: 8.7kg Price is slightly negotiable. Can be shipped across india at buyers risk and extra cost. Drop a message if I do not respond to calls. Note: The speakers in the images are not a part of this deal

Kenwood stereo integrated amplifier is in perfect working condition with 100% originality, , PRICE IS FIXED Kenwood Stereo Integrated Amplifier A-82, very powerful amplifier for front and rear speakers and subwoofer. Suround-optie.Getest and fine acting. also optically excellent. FIXED PRICE Made in japan As for turntable, CD / CDV THAT, VIDEO TAPE. Kenwood Stereo Integrated Amplifier A-82 2X 60 Watts Serious buyers can approach by sending your mobile number please avoid sending unwanted price and messages. PRICE FIXED Thank you.

Sansui AU-X501 Stereo Integrated Amplifier, Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MC), 83dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 448 x 135 x 370mm Weight: 10.8kg

Akai AM-2600 Stereo Integrated Amplifier  Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Damping factor: 60 Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 95dB (line) Channel separation: 55dB (MM) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω

Specifications Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: % Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 448 x 160 x 441mm Weight: 17.1kg

Specifications Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 80kHz Total harmonic distortion: 0.06% Damping factor: 60 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 97dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 410 x 140 x 315mm Weight: 7.2kg

50+50 W output, 7 input connections, It is fully recapped and serviced by qualified Engineer. New drive stages installed replacing the old damaged ones for performance like a new one. This amplifier now performs like a brand new one though it is few years old. For further details contact 94402267.68. Only serious buyers may contact. Provided with Owners and Service Manuals and replacement Remote Control.

YAMAHA R-S202 STEREO RECEIVER Advanced circuitry design Bluetooth ® to your favorite streaming music services 40 station FM/AM preset tuning Brushed aluminum finish and simplistic design Speaker selector for two systems Simple remote control layout Headphone terminal BILL + 1 YEAR YAMAHA INDIA WARRANTY VALID ALL OVER INDIA Yamaha, the most trusted brand in home audio, adds Bluetooth® compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha natural sound. Heritage of Technical Expertise Rooted in technology and expertise. The R-S202 was created from years of experience and technological expertise in receiver design. With a music heritage that runs over 125 years deep, our passion and reputation for Hi-Fi was born from the music side and extended into electronics. The concept of natural sound is based on reproducing music as it would be experienced live. Built with scrupulous care from the circuit design to basic sound reproduction, the R-S202 reproduces high-quality, musically-rich sound for the entry level consumer. High-Power Output Never peak. The R-S202, with two channels of 100 W high-power output* that are above its class, has a high-quality sound design that minimizes the length of signal routes and optimizes the circuit layout. Positioning the power transformer near the amp circuit reduces power loss while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground connect at one point, eliminating mutual interference to achieve a higher S/N ratio. The result is sound clarity stripped of noise and other signals. *8 ohms, 40 Hz-20 kHz, 0.2% THD Bluetooth ® to Streaming Music Services Connect wirelessly. The R-S202 provides Bluetooth functionality to let you enjoy streaming music from smart phones and other devices. Use your device to select the songs from your library and hear them with the legendary quality of Yamaha sound. 40 Station AM/FM Preset Tuning All your stations. Register up to 40 favorite FM and AM stations, then conveniently select them from either the receiver or the remote control. Auto preset lets you automatically search for and register FM stations. Frequencies appear on the display, so when you want to listen to a new station, you can quickly and easily dial it in. Simple and Sophisticated Design Less is more. The R-S202 inherits the simple, sophisticated design style for which Yamaha Hi-Fi audio is famous. With an elegant brushed finish, it harmonizes beautifully with other audio equipment. The Yamaha commitment to beauty and sophistication are demonstrated in the finish and ease of control, giving the user a premium audio experience. Speaker Selector Check one, two. Equipped with speaker terminals for two systems, this receiver lets you connect two sets of speakers. The speaker selector makes it easy to switch between outputs, allowing you to hear the sound from one speaker system (A or B) or both (A+B). Try the Yamaha NS-6490 bookshelf speakers and the YST-SW216 powered subwoofer with the R-S202 for an ultimate stereo system. Power Saving Go Green. A power management function automatically switches to standby mode. It can be set to two, four, eight or 12 hours or turned off. Power consumption during standby is only 0.5 W, achieving good energy saving performance. Other Notable Features • Simple remote control layout • Headphone terminal Receiver / Integrated Amplifier Network section Bluetooth Yes (SBC / AAC) Rated Output Power (8 ohms, 40 Hz-20 kHz, 0.2% THD) 100 W + 100 W Maximum Power(8 ohms, 1 kHz, 10% THD) 140 W + 140 W High Dynamic Power / Channel (8 / 6 / 4 / 2 ohms) 125 W / 150 W / 165 W / 180 W Frequency Response 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB) Total Harmonic Distortion (CD to Sp Out, 20 Hz - 20 kHz) 0.2% Signal-to-Noise Ratio (CD) 100 dB (500 mV) Input Sensitivity (CD) 500 mV / 47 kΩ FM 50dB Quieting Sensitivity (IHF, 1 kHz, 100% Mod., Mono) 3 μV (20.8 dBf) FM Signal-to-Noise Ratio (Mono / Stereo) 71 dB / 70 dB Standby Power Consumption 0.5 W Dimensions (W x H x D) 17-1/8” x 5-1/2” x 12-5/8” Weight 14.8 lbs. ANY OCTROI PAYABLE WILL BE BORNE BY THE BUYER. IN CASE OF ANY INQUIRIES OR COMPLAINTS PLEASE CONTACT US AT +918800163686  OR rhythmics5@gmail.com   YOUR POSITIVE FEEDBACK HELPS OUR BUSINESS GROW. SO IF YOU ARE SATISFIED WITH OUR PRODUCT AND SERVICES THEN PLEASE DO LEAVE A FEEDBACK. THANK YOU.

Yamaha Rx-v receiver.Top of the line Receiver with THX bought from US.110v with stablizer. Specifications FRONT, 20Hz-20kHz, 0.04% THD, W + 120W CENTER, 20Hz-20kHz, 0.04% THD, W SURROUND, 20Hz-20kHz, 0.04% THD, W + 120W SURROUND BACK, 20Hz-20kHz, W + 120W MAIN, W 8Ω 1.3dB MAIN L/R, 20Hz-20kHz, or more PHONO MM 3.5mV/47kΩ CD, etc 200mV/47kΩ MULTI CH INPUT 200mV/47kΩ PHONO MM, 1kHz, 0.05% THD, (Effect on) 100mV CD, etc (Effect on) 2.2V REC Out 200mV/1.2kΩ PRE OUT (MAIN, etc) 1V/500Ω Mono 2.0V/500Ω ZONE 2/ZONE 3 OUTPUT 1V/1.2kΩ CD, etc, (40mV, mV/100Ω CD, etc, MAIN L/R +0/-3.0dB Boost/Cut +/-6dB (50Hz) Turnover Frequency 350Hz CD, etc, to MAIN SP OUT L/R (60 W % CD, etc, Input Shorted (Effect off) 100dB PHONO MM to REC OUT 86dB MAIN, SP OUT 150uV or less CD, etc, Input 5.1kΩ Shorted, 10kHz 45dB CD, etc, Input 5.1kΩ Shorted, 1kHz 60dB Video Signal Type NTSC Composite Video Signal Level 1Vp-p/75Ω Y 1Vp-p/75Ω C Vp-p/75Ω Cb/Cr 0.7V/75Ω Video Maximum Input Level 1.5Vp-p Video Signal-to-Noise Ratio 50dB Composite Video Signal 5Hz-10MHz, -3dB S-Video Signal 5Hz-10MHz, -3dB Component Signal DC-60MHz, -3dB Tuning Range 87.5 to MHz Mono (1kHz, 100% Mod) 2.0uV (17.3dBf) Stereo (1kHz, 100% Mod) 25uV (39.2dBf) Selectivity (400kHz) 70dB Mono/Stereo (IHF) dB Mono/Stereo (1kHz) kHz 42dB 20Hz-15kHz +dB FM 100% Mod. 1kHz 550mV Antenna Input 75Ω unbalanced Usable Sensitivity 300uV/m AM 30% Mod. 1kHz 150mV CD Player Signal-to-Noise Ratio 52dB Specifications Antenna Loop Antenna Weight 35 lbs. Dimensions (W x H x D) " x 6 3/4" x ". Fixed price.

Yamaha full rack system with remote RS 35000 1. Yamaha CX600 pre Japan Yamaha M-35 power amp Japan Yamaha TX-480 Tuner Malaysia Yamaha CDX - 493 Malaysia with Yamaha original remote,the full rack works on the single remote.Only the power Amp works on 110 volt all other items are 230 volt.The rack will not sold as individual pieces. 110v adapter supplied with the amplifier. 2. Teac A 919 DC true 110w + 110w on 8 ohms amplifier Japan Made RS - 22000 3. Phillips FB696/01 Stereo tower speaker with two 8 inch drives heavy 120w-180w Made Belgium speakers - Rs 25000 The Teac Amp and Phillips FB696 are perfect matching pair Time passers please excuse. Interested persons please come on chat All the items are in mint condition

YAMAHA A-500 NATURAL SOUND STEREO AMPLIFIER - USED GOOD Power output: 70 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 76dB (MC), 92dB (MM), 100dB (line) Channel separation: 55dB (MM), 60dB (line) Output: 150mV (line) Dimensions: 435 x 112 x 327mm Weight: 7.3kg USED UNIT IN VERY GOOD WORKING CONDITION

Yamaha natural sound stereo graphic equalizer GE -60,Made in Japan 10+10 band, 15db equalizer level is never seen before.

Yamaha 5.1 stereo amplifier, gently used, good working condition,

Yamaha hi-end amplifier with original remote. you may use it as a pre amplifier also. gr8 look with prefect working. Sirius persons plz call on 9210. 27. 2811. Yamaha DSP-A2070 Audio Video Amplifier (1992-96) Specifications Power output: 80 watts per channel into 8Ω (stereo) Surround output: 80W (front), 80W (center), 25W (rear) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 96dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Video Connections: composite, SVHS Dimensions: 435 x 170 x 468.5mm Weight: 21kg Accessories: remote control 1992 Key words:- Onkyo, denon, MARANTZ, Yamaha, Bose, Sony, Polk audio, nad, Harman kardon, Jbl, infinity, jamo, morden shot, Technics, Pioneer, Elac, B&W, B&O,.