12v 10a 120w dc

12V 10A CCTV Power Supply G-VISION 12v-10Amp Input V-2AMP Line Frequency:- Hz Input Power 150 watt Maximum Output Power 120 watt Maximum Power LED monitor Over current protection Over Voltage protection Short circuit & overload Protection High efficiency, durable, long life. For More Information  Email ID: ,  Mb. No. ,   www.dolphinenterprises.in

12V 10A CCTV Power Supply ERD 12v-10Amp Input V-2AMP Line Frequency:- Hz Input Power 150 watt Maximum Output Power 120 watt Maximum Power LED monitor Over current protection Over Voltage protection Short circuit & overload Protection High efficiency, durable, long life. For More Information  Email ID: ,  Mb. No. ,   www.dolphinenterprises.in

12V 10Amp 120W DC WEATHERPROOF Power Supply SMPS for CCTV Camera and LED Strip Light Lamp Note:  This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable, on/off switch, or screws.  Professional installation of qualified electrician is highly recommended.   Colour Choice is not available. Colour may change without Prior Notice.  No Warranty, we checked functionality of each supply before sending. Picture showed here is only for illustration purposes. Shipped item Specifications are 100% matched as mentioned

Click  here  to view my full range of products   12V 10A 120W Universal Switching Power Supply for LED Strip / CCTV AC Applications: Universal AC input / full range It's good quality & high performance 100% full load burn-in test Protections: overload/ over voltage/ short circuit Cooling by free air convection (Not suggest for use

Presents The Ultimate Online Shop Available all Kinds of Computer, Mobile Acessories, Remotes, Chargers, Rechargeable Battery, Specialized Cables, Audio Video Accessories, Kitchenware 12V 10Amp 120W DC Power Supply SMPS for CCTV Camera and LED Strip Light Lamp Note:  This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable, on/off switch, or screws.  Professional installation of qualified electrician is highly recommended.   Colour Choice is not available. Colour may change without Prior Notice. No Warranty, we checked functionality of each supply before sending. Picture showed here is only for illustration purposes. Shipped item Specifications are 100% matched as mentioned

We Specially Deals In Security Camera. For Dealer Price Call Us: Ph. :Our Main Products: CCTV Camera (Dome CCTV,Bullet Outdoor Camera,IP Camera,PTZ Camera) DVR (Ch. DVR) Video Door Phone with Electronic Lock Camera Accessories (Wire,BNC,RC, Power Supply,Video Baloon)      ((Note:-  You Can Purchase

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.

120W,12V - 10A ACCURATE VOLTAGE AND CURRANT OUTPUT,  NON WATERPROOF,  CE ROHS CERTIFIED  FULL ALUMINIUM COVERING,  WEIGHT 0.5KG DIMENSION:  129MM*98MM*40MM USED FOR LED LIGHTS, CCTV, MULTIPURPOSE WHERE 12 VOLT DC VOLTAGE AND CURRANT UPTO 10A REQUIRED

Click  here  to view my full range of products   12V 5A 120W DC Switch Power Supply Driver For LED Strip Light Display 110V-220V Six months replacement warranty Description:         100% brand new, good quality & high performance         Universal AC input / full range         100% full load burn-in test         Protections: overload/ over voltage/ short circuit         Cooling by free air convection Used for CCTV / LED STRIPS   Specifications:         AC Input: V Hz         DC Output: 12V 5A         Material: Fiber, Electronic Parts         Color: Black Pin Size: 5.5mm x 2.5mm / 2.1mm Package Includes:         1 x New 12V 5A DC Universal Regulated Switching Power Supply Connection: Safety Compliance: CCC/ FCC / CE Working Temperature: 0~40℃ Storage Temperature: -℃ Ambient Humidity: 0~95% Non-Condensation If you have any question, please contact us via message. Replacement Policy: All items are checked and packed

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan  for other Solar, DC, or AC-DC Energy Efficient Products and Solutions. Click here to visit rajivihaan shop http://stores..in/rajivihaan   Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce - This item is a fan only with DC-Dc wire and AC-DC Adapter and includes nothing else - 12V Solar DC Pedestal Fan 30W with 220V AC - 12V DC Adapter -  Includes AC/DC Adapter to make the fan work on normal AC main.  - Works on 12V DC (Solar Panel or Battery). Requires 12V Solar Panel and/or battery extra. Recommended to use Solar Charge Controller with Solar Panels - Works on 220V AC Mains using 220V AC - 12V DC Adapter which is included. Obviously requires AC Mains Supply to work on 220V AC. - Three Speed Oscillating - RPM - Inch Sweep -  Fan comes with DC-DC Cable with open wire interface (instead of a plug), because buyer may want to connect to any 12V DC source like 12V Solar Panel, 12V Battery, 12V Solar Charge Controller, or 12V DC Distribution Board - Fan also comes with AC-DC Adapter which converts 220V AC to 12V DC - Please don't connect or plug the fan directly into 24V/48V DC or higher DC Voltage or 220V AC Electricity mains - This will cause electrical burns to the Motor, and make the product non-functional. This will void the Warranty. Connect 220V AC to the AC-DC Adapter, which converts AC to 12V DC, and connect the 12V DC output of the Adapter to the fan.    - For working this Fan from Solar, you need 12V/60W or 12V/74W Solar panel and 12V/10A Solar charge controller, both of which maybe bought from our shop on http://stores..in/rajivihaan   or our ecommerce site  www.gaonsegaon.com/ecommerce  . To work from Solar, additionally you need to buy these items locally, 12V/30AH or bigger battery (longer the back-up hours needed, bigger the battery needs to be), Frame/Fixture for Solar Panel, Wiring of 4 mm or thicker gauge (longer the distance between solar panel, charge controller, battery, and fan, the thicker the wire needs to be)   Caution:-    1.) This is a 12V DC Product, and works on 12V DC only. 2.) Please do not connect this product directly to 220V AC Mains electricity

Visit rajivihaan shop on e-Bay for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at for any additional information, or visit www.rajivihaan.com  

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan  for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below Please contact us at    or visit our website for more details:  www.gaonsegaon.com -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce - This item is fan only with DC-DC Wire and AC-DC Adapter and includes nothing else - 12V Solar DC Wall Fan - 30 W- 3Speed with 220V AC to 12V DC Adapter - Includes 220V AC - 12V DC Adapter to make the work on normal AC Mains  - Works on DC (Solar or Battery). Requires Solar Panel and/or battery extra. Recommended to use Solar Charge Controller with Solar Panel - Works on 220V AC Mains using 220V AC - 12V DC Adapter. Obviously requires AC Mains Supply to work on AC.  - RPM - inch Sweep - 3 Speed Oscillating   - Fan comes with DC-DC Cable with open wire interface (instead of a plug), because buyer may want to connect to any 12V DC source like 12V Solar Panel, 12V Battery, 12V Solar Charge Controller, or 12V DC Distribution Board - Please don't connect or plug the fan directly into 24V/48V DC or higher DC Voltage or 220V AC Electricity mains - This will cause electrical burns to the Motor, and make the product non-functional. This will void the Warranty. Connect the AC-DC Adapter to 220V AC Supply, and connect the 12V DC Output of the Adapter to the fan. - For working this Fan from Solar, you need 12V/60W or 12V/74W Solar panel and 12V/10A Solar charge controller, both of which maybe bought from our shop on http://stores..in/rajivihaan   or our ecommerce site  www.gaonsegaon.com/ecommerce  . To work from Solar, additionally you need to buy these items locally, 12V/30AH or bigger battery (longer the back-up hours needed, bigger the battery needs to be), Frame/Fixture for Solar Panel, Wiring of 4 mm or thicker gauge (longer the distance between solar panel, charge controller, battery, and fan, the thicker the wire needs to be)   In case of any clarification, please feel free to contact us at   or visit www.gaonsegaon.com/ecommerce Caution:-    1.) This is a 12V DC Product, and works on 12V DC only. 2.) Please do not connect this product directly to 220V AC Mains electricity

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan  for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com