30v

1 X 30V +333MA Printer Power Adapter/AC Adapter Charger for HP Deskjet 1050 1000 2050 2000 2060 3050 OfficeJet 0957-2286 0957-2290 (for HP 30V+333MA)

http://laptoppartsmall.org/xp-veh60us30-30v-2a-ac-adapter-p-21125.html XP VEH60US30 30v 2a AC Adapter Adapter Name: XP30V2A60W-5.5x2.5mm Adapter Brand: XP Input: 100-240V~1.7A 50/60Hz OutPut Voltage: 30 V OutPut Current: 2 A Weight( Adapter only ): 280g Adapter Power(Max): 60W Adapter Tip Size: 5.5 x 2.5 mm This AC Adapter Can Replace Follow Original Adapter Number: VEH60US30

Features: This is high performance DC to DC Step Down Adjustable Power Supply Module Based on well known LM Switching Regulator. Size: Approx. 4.7 x 2.6 x 1.3cm Color: As the picture show Full load Temperature rise: 40 Load Regulation: ± 0.5% Voltage Regulation: ± 0.5% Dynamic Response speed: uS Input voltage:V Output voltage:V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heat sink is required) Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficiency) Switching Frequency: 150KHz Rectifier: Non-Synchronous Rectification Module Properties: Non-isolated step-down module (buck) Short Circuit Protection: Current limiting, since the recovery Operating Temperature: Industrial grade (-40 to +85) (output power 10W or less) Package included: 1 x  LM DC-DC adjustable power step-down module

PWM DC 6V 12V 24V 28V 3A Motor Speed Control Switch Controller Regulator This DC Motor Speed Controller allows controlling the speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from %.  The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load.  Input supply voltage: 5V-30VDC  The maximum output power: 80W  The maximum continuous output current: 3A  Duty Cycle adjustable: %  Operating instruction:  1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram.  2. Connect a voltage of 5V-30V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply

30V 333mA hp printer  ac adapter for HP Deskjet All-in-One Printer series.                                                                                                                                         (Original Power Adapter) Input: V 300mA Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

30V 333mA hp printer  ac adapter for HP Deskjet All-in-One Printer series.                                                                                                                                         (Original Power Adapter)                                                              Input: V 165mA Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

  30V 333mA hp 0957-2286 0957-2290 printer  ac adapter for HP Deskjet 1050 2050 All-in-One Printer series.                                                                                                                                         (Original Power Adapter)                                                              Input: 100-240V 165mA 50/60Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

  30V 333mA hp 0957-2286 0957-2290 printer  ac adapter for HP Deskjet 1050 2050 All-in-One Printer series.                                                                                                                                         (Original Power Adapter) Input: 100-240V 300mA 50/60Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

Want to purchase DC power supply at very good price. Detailed Product Description Hot selling 30V/5A DC power Lodestar LPD 1.DC power:30V/5A 2.Low ripple and noise 3.Competitive price Hot selling 30V/5A DC power Lodestar LPD is at sale now! Just Call Us - Or Email Us -

Want to buy DC power supply at special discounts. Detailed Product Description Hot selling 30V/5A DC power Lodestar LPD 1.DC power:30V/5A 2.Low ripple as well as noise 3.Competitive price Hot selling 30V/5A DC power Lodestar LPD is at sale now! Just Call Us - Or Email Us -

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

4-channel relay control board module with optocoupler, 4 way relay module for arduino 4-channel relay output modules, relay output contacts 250A 10A. Input IN1, IN2, IN3, IN4, the signal line LOW effective. VCC, GND power input, can relay a separate power supply relay power input of JD-VCC. Uses: support all MCU control. the industrial sector PLC control smart home control Module parameters: Size: 75mm (length) x 55mm (W) x 19.3mm (height); Weight: 58g; PCB Color: Blue; board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed; Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal; optocoupler isolation, good anti-jamming; Low pull, high release. Energisation status indicator light, release status LED is off; VCC for the system power, JD_VCC for the relay power. Default hair 5V relay, plug the jumper cap to; Relay Maximum output: DC 30V/10A, AC 250V/10A Wiring: VCC: positive power supply system GND: System power supply negative IN1 – IN4: relay control ports Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

0 - 30 Volt / 2 Amps DC Regulated Power Supply   DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument. It is particularly suitable for experimental development and low voltage applications. Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.   SPECIFICATIONS INPUT VOLTAGE 230 V + 10% AC 50 Hz. OUTPUT VOLTAGE 0 - 30V DC Continuously Variable with Course & Fine Control. OUTPUT CURRENT 0 - 2 A Settable DC with Coarse & Fine Control. LOAD REGULATION + 0.05% from no load to Full Load. LINE REGULATION + 0.01% for + 10% Variation

RCA connector - rca plug - good quality - 1 pair  TYPE:- RCA connector male plug / RCA connector  Qty:- 1pair  Brand:- SUNRISE  color:- gold plated  style:- screw style Part No:- TP11SG Electrical and physical properties:-  Characteristic RCA Withstand voltage 30V Withstand current 6A Limiting voltage 250V Contact resistant below 15m ohm Thickness of contact pin plated up to products Lifetime more than times Salt-fog testing of shell 4 hours

Hoki HK DC Regulated Power Supply 30 Volt 5 Amp.   Features Input: V ±Hz Variable Output Voltage: 0 - 30V DC Variable Output Current: 0 - 5A     Be sure to add me to your  favourites list !   Check out my  other items ! CONTACT  US For Any Further Query or Suggestion Email Us At      SHIPPING POLICY   ▪      All items are dispatched through reputed couriers & we don't use speedpost / indiapost. ▪       Mostly products are shipped within 2-3 working day after realization of payment. ▪       Octroi & local levies, if any, will be borne by the buyer at the time of delivery.   RETURN  POLICY   ▪     NO RETURNS are accepted for this Listing Unless Item Arrives Damaged. ▪     Returns are on conditional basis, subject to seller's discretion. ▪     Returns will be accepted only after approval. Please contact us prior to returning the product. ▪     Buyer has to pay all-return postage and shipping charges. ▪     Buyer would not be entitled for a refund or a replacement if the Product that is returned shows improper      use, improper handling or physical damage; missing manuals, missing original packing, box, parts and or accessories. FEEDBACK & DSR POLICY   ▪     Your Positive Feedback and 5 Stars DSR ratings are extremely important for us. ▪       We strive for 100% customer satisfaction and we love to leave Positive Feedbacks to our buyers. ▪       Please do leave Positive Feedback with 5 Stars

Isolated Optocoupler Driver Power Relay Module 8CH 5V for AVR 51 PIC SCM  FREE SHIPPING Product Name Optocoupler Driver Relay Module Relay Type SRD-05VDC-SL-C Coil Voltage DC 5V Pole Number 8 Channel Load 10A, AC 250V/125V, DC 30V/28V Overall Size 13.8 x 5.5 x 1.8cm/5.4" x 2.2" x 0.7"(L*W*H) Materials Metal, Plastic, Electric Parts Main Color Blue

Metravi RPS- DC Regulated Power Supply 30 Volt 5 Amp.   Features Utilizes SMT Technology Green LED Display Voltage and Current displayed together Multi-turn variable device to provide high precision voltage setting. Auto-tracking on PARALLEL and SERIAL working condition Presetting the voltage and current DC Output Switch Extended output terminals Continuous working under full load condition Constant Current and Constant Voltage Protection Short Circuit protection Input: V ±Hz Variable Output Voltage: 0 - 30V DC Variable Output Current: 0 - 5A       Be sure to add me to your  favourites list !   Check out my  other items ! CONTACT  US For Any Further Query or Suggestion Email Us At      SHIPPING POLICY   ▪      All items are dispatched through reputed couriers & we don't use speedpost / indiapost. ▪       Mostly products are shipped within 2-3 working day after realization of payment. ▪       Octroi & local levies, if any, will be borne by the buyer at the time of delivery.   RETURN  POLICY   ▪     NO RETURNS are accepted for this Listing Unless Item Arrives Damaged. ▪     Returns are on conditional basis, subject to seller's discretion. ▪     Returns will be accepted only after approval. Please contact us prior to returning the product. ▪     Buyer has to pay all-return postage and shipping charges. ▪     Buyer would not be entitled for a refund or a replacement if the Product that is returned shows improper      use, improper handling or physical damage; missing manuals, missing original packing, box, parts and or accessories. FEEDBACK & DSR POLICY   ▪     Your Positive Feedback and 5 Stars DSR ratings are extremely important for us. ▪       We strive for 100% customer satisfaction and we love to leave Positive Feedbacks to our buyers. ▪       Please do leave Positive Feedback with 5 Stars

AAA battery support Time Technical Specifications Input voltage: VAC Frequency Hz Contact: Single Pole - Single Throw 16 A, 250 V AC or  20 A, 30V DC Running Accuracy: ± 1 second / day at 20°C Minimum Time Setting: 1 minute Load - Resistive 16A, Inductive 8A, Motor 2H

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. Aslb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one aslb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, aslb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. Aslb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. Aslb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Product   from      ramatech                    A technological Company for high quality products and best pricing. F or Electronic repairers, Professionals, Technicians, DIY Applications, Science Students, Hobbyists Assorted Pack of 90 Diodes each value 5 Nos   BRAND NEW & UNUSED Extreme High Quality 5 Each of the following Types = 90pcs (If you need any other values let us know, we can mix and match) C2V4PH - DIODE ZENER 2.4V 500MW C3V3PH - DIODE ZENER 3.3V 500MW C3V6PH - DIODE ZENER 3.6V 500MW C3V9PH - DIODE ZENER 3.9V 500MW C4V7 5T - DIODE ZENER 4.7V 500MW BZX55C 6V2 - DIODE ZENER6.2V 500MW 55C6V8 - DIODE ZENER 6.8V 1/2 Watt C7V5 5T - DIODE ZENER 7.5V 500MW C8V2PH - DIODE ZENER 8.2V 500MW C9V1 5T - DIODE ZENER 9.1V 500MW 55C10 - DIODE ZENER 10V 1/2 Watt C11PH - DIODE ZENER 11V 500MW 55C12 - DIODE ZENER 12V 1/2 Watt C15PH - DIODE ZENER 15V 500MW Z20B - DIODE ZENER 20V 500MW B2 27 - DIODE ZENER 27V 500MW    DIODE ZENER 30V 500MW    DIODE ZENER 33V 500MW 1N (PH) - Standard silicon switching Diode 1NA /V general purpose silicon rectifier diodes (compatible to 1NNNNNN)   Notes: MW - Milli Watt, A - Amps, V - Volts

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs 1600 step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. A3967slb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one a3967slb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, a3967slb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. A3967slb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. A3967slb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Hotron E246588 AWM Style 20276 VW-1 30V Monitor Cable Male Ends Blue Mobile: 902 5125 889 Mail:: vinothkumarM_@hotmail.com

Specification Type: Male plug banana connector Current rating: 15A Voltage rating: 30V Contact material: copper Nickel plating Highly insulated with polyethylene Larger contact surface for better performance Buy Now: https://electronicspices.com/product/4mm-15a-blue-color-male-plug-banana-connectors-pack-of-50pcs/

Specification Type: Female socket banana connector Current rating: 5A Voltage rating: 30V Socket diameter: 2mm Contact material: copper Nickel plating Highly insulated with polyethylene material Larger contact surface for better and stable performance Buy Now:https://electronicspices.com/product/2mm-5a-black-color-female-socket-banana-connector-pack-of-5pcs/

QJE QJ3005T ADJUSTABLE DC POWER SUPPLY (0 ~ 30V/0~5A) Output Power: 150W Output Type: Single Input Voltage: 220V Output Voltage: 0-30V Output Frequency: 50Hz Output Current: 0-5A Genuine buyers pls contact: