5v motor

Description Package Includes: 1 Piece new  5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN Line 4 Phase It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece   5v stepper motor  KG153 It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece   5v stepper motor  KG153 It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Signal Output function: Brand new and high quality. Voltage: 5V. Diameter: 28mm. Step angle: x 1 / 64. Reduction ratio: Line 4 phase can be driven by ordinary uln chip can also be connected

Item Description:     Brand new and high quality Voltage: 5V Diameter: 28mm Step angle: x 1 / 64 Reduction ratio: Line 4 phase can be driven by ordinary uln chip can also be connected

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.

DESCRIPTION Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for Arduino 1. L298N as main chip, ST corporation production. 2. Low heat,outstanding anti-interference performance. 3. High working power to 46v,large current can reach 3A MAX and continue current is 2A, power 25w. 4. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. 5. Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply. 6. Large capacity filter capacitance,afterflow protection diode, more stable and reliable. o Specifications: 2. Double H bridge drive 3. Chip: L298N (ST NEW) 4. Logical voltage: 5V 5. Drive voltage: 5V-35V 6. Logical current: 0mA-36mA 7. Drive current: 2A(MAX single bridge) 8. Size:43 x 43 x 26mm 9. Max power: 25W 10. Net weight: 25g Uses: 11. Driving stepper motor: The connection of driving a common 4 line 2 phase electric motor is shown in figure after enable ENA ENB Input the following driving timing from IN1-IN4-then the speed and direction of the stepper motor can be controlled. 12. Driving DC motor: Because this module is driven by double H bridge,it can drive two motors simultaneously. after enable ENA ENB You can input the speed and direction of PWM signal drive motor 1 from IN1 IN2 You can input the speed and direction of PWM signal drive motor 2 from IN1 IN2 We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

This is driving module is a common DC motor, using 293D chip low current DC motor drive chip. Pins are made of Arduino compatible, also facilitate the lovers rapid development based on Arduino. 2 5V servo motor (servo) port to the Arduino high resolution and high precision timer - no jitter! 1, as many as 4 bidirectional DC motor and 4 PWM speed (approximately 0.5% of the resolution) 2, as many as 2 stepper motor control, single / double step control, staggered or subdivided and rotation angle control. 3, 4: L293D H- bridge chip each Luqiao.0.6A (peak 1.2A) current and a thermal power protection, 4.5V to 36V. 4, pull down resistor maintain the motor stop status

L293D Arduino multi-motor control shield for arduino UNO Compatible with UNO, Mega, Diecimila & Duemilanove Product Summary:   ·         The shield contains two L293D motor drivers and one 74HC595 shift register. ·         The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. ·         The output enable of the L293D is directly connected to PWM outputs of the Arduino. ·         The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.   Description: ·         2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  ·         Up to 4 bi-directional DC motors with individual 8-bit speed selection (about 0.5% resolution)  ·         Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  ·         4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  ·         Pull down resistors keep motors disabled during power-up  ·         Big terminal block connectors to easily hook up wires (AWG) and power  ·         Arduino reset button brought up top ·         2-pin terminal block to connect external power, for seperate logic/motor supplies  ·         compatible with UNO,Mega, Diecimila, & Duemilanove ·         Dimensions: 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in)   Package Include: ·         1pc. L293D Arduino multi-motor control shield Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Special Scheme BUY 4 GET 1 FREE The All new Motor Driver Shield for your Arduino. It can run 2 servo or 2 stepper or 4 DC motor with the help of external power supply and controlling via arduino. Versatile product comes from adafruit. --  2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution      dedicated timer - no jitter! --  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%      resolution) --  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or      micro-stepping. --  4 H-Bridges: L293D chip set provides 0.6A per bridge (1.2A peak) with thermal shutdown      protection, 4.5V to 25V --  Pull down resistors keep motors disabled during power-up --  Big terminal block connectors to easily hook up wires (AWG) and power --  Arduino reset button brought up top --  2-pin terminal block to connect external power, for separate logic/motor supplies --  Tested compatible with Mega, Diecimila, & Duemilanove now, first time Made

WELCOME TO ROBOCENTRAL***    ***IMPORTED DC- DC Buck Converter ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ****DESCRIPTION**** Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. !!!SPECIFICATION!!! 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  Pull down resistors keep motors disabled during power-up  Big terminal block connectors to easily hook up wires (AWG) and power  Arduino reset button brought up top 2-pin terminal block to connect external power, for seperate logic/motor supplies  Tested compatible with UNO,Mega, Diecimila, & Duemilanove Dimensions(assembled): 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in) Package Contains  1 X L293D Motor Control Shield      we value your needs           So usually ship within same business day except Sunday or public holiday's          WE AIM AT PROVIDING BEST QUALITY PRODUCT S                    ***AT LOWEST POSSIBLE RATES ***                      * **WE  USE QUALITY SHIPPING ONLY***           (TO ENSURE THAT THE PRODUCT REACHES YOU AT THE EARLIEST)         YOUR FEEDBACK IS HIGHLY VALUABLE FOR OUR BUSINESS TO GROW   **PLEASE LEAVE US THE BEST 5(STAR) RATINGS**      *********ONCE YOUR ARE SATISFIED*********   In case of any claim or complaints please contact us before leaving any neutral or negative feedback    ****And we will try our best to resolve your issue****    For Any Queries Please Call us on: / .   OR    You can email us at:            "DON'T WORRY BUY WITH CONFIDENCE"        !!!THANK'S FOR  GIVING US YOUR VALUABLE TIME!!!            **PLEASE VISIT AGAIN**

2 pcs Mini motor 1.5v to 3v DC motor operating voltage- 1.5v-3v  All items are dispatched through Fedex,Bluedart,indian post,Dtdc for fast shipping and reliable service. We process the shipment Same Business or Next Day of cleared payment confirmation. Online Tracking Number shall be provided once the consignment is sent. Standard Shipping generally takes 2-4 working days according to the destination. The location which doesn't get served by the above courier service provider shall be refunded back

Package Contains The All new Motor Driver Shield for your Arduino. It can run 2 servo or 2 stepper or 4 DC motor with the help of external power supply and controlling via arduino. --  2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution      dedicated timer - no jitter! --  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%      resolution) --  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or      micro-stepping. --  4 H-Bridges: L293D chip set provides 0.6A per bridge (1.2A peak) with thermal shutdown      protection, 4.5V to 25V --  Pull down resistors keep motors disabled during power-up --  Big terminal block connectors to easily hook up wires (AWG) and power --  Arduino reset button brought up top --  2-pin terminal block to connect external power, for separate logic/motor supplies --  Tested compatible with Mega, Diecimila, & Duemilanove you can learn more at http://learn.adafruit.com/adafruit-motor-shield. There you can find FAQ, Library and many more things.... Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

DESCRIPTION L293D Arduino Official Motor Drive ShieldHere is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. 2 connections for 5V hobby servos connected to the Arduino s high-resolution dedicated timer no jitter! 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 36VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. Pull down resistors keep motors disabled during power-up Big terminal block connectors to easily hook up wires (AWG) and power Arduino reset button brought up top 2-pin terminal block and jumper to connect external power, for seperate logic/motor supplies Tested compatible with Arduino Mega, Diecimila & Duemilanove Download the easy-to-use Arduino software library, check out the examples and you re ready to go! The motor drive, can also drive 4 dc motor can be 600MA through each motor, motor can be run in to the 36V voltage between 4.5 V.Can also drive two stepper motor and two steering gear. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

DC Motor / Stepper Driver H Bridge Controller This motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc This is a high power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L298 motor driver IC and has onboard 5V regulator which it can supply to an external circuit. It can control upto 4 DC motors, or 2 DC motors with directional and speed control It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels

HKKV Brushless Multirotor Motor +30A ESC+ Propeller   Specifications: HKKV brushless outrunner/multicopter motor: Max. efficiency: 80% Max. efficiency current: 4-10A (>75%) Current capacity: 12A/60s No Load current @ 10V: 0.5A No. of cells: 2-3 Li-Poly Motor size: mm / in Shaft diameter: 3.17mm / 0.1in Weight: 48g / 1.7oz 30A Brushless ESC: Output: Continuous 30A, burst 40A up to 10 Secs. Input voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC: 2A / 5V (Linear mode). Max speed: rpm for 2 poles BLM, rpm for 6 poles BLM, rpm for 12 poles BLM. (BLM: Brushless Motor) Size: mm / in Weight: 25g / 0.9oz Item total weight: 480g / 1.06Lbs   Package  includes:   100% Brand New     1 * AKV Brushless Outrunner Motor with Mounts     1 * 30A Build-in BEC 2A Brushless ESC    1 * Pair of 10x45 CW CCW (LHR RHR) Propellers (Black)  

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Description "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">2pcs Motor 4.5-5V DC motor for toy, project Plus Mini Fan Blade Technical parameters: 1 Piece new  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">2pcs Motor 4.5-5V DC motor for toy, project Plus Mini Fan Blade Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We maintain high quality and shipping standards  We strive for 100% positive feedback and work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

HOTLINE: +   Mini Submersible Pump Motor Mini Submersible Pump Motor This is a low cost, small size Submersible Pump Motor which can be operated from a 2.5 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it

DESCRIPTION MatLogix Arduino Uno Board with Universal Shield The ARDUINO Board (ATMEGA 8-L) is a microcontroller board based on the ATmega 8-L. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8 up to programmed as a USB-to-serial converter. Universal Shield: Features: A monolithic integrated, high voltage, high current, 4-channel driver Using this chip you can use DC motors and power supplies of up to 36 V, so that some pretty big motors and the chip can supply a maximum current of 600mA per channel Also known as a type of H-Bridge, which is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC Pull down resistors keep motors disabled during power-up Up to 4 bi-directional DC motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping LDR (light Sensor) for detecting the intensity of light. On board Regulated Power Supply 5v,12v supplys A Serial Port DC Power Supply Connector(12v Dc) LCD display 2x16Character Extra Vcc and Gnd Pins from which you can connect different devices. Potentiometer to set the light intensity of LCD Screen. Reset Switch to reset the arduino board. Slot for TSOP sensor. Kit Content: 1 x Arduino Uno Board 1 x 16x2 LCD (Female) 1 x L293D IC 1 x LDR 1 x USB Cable We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

This is L293D based H-Bridge motor driver board for driving DC motors and is ideal for robotics applications. PTR CONNECTORS FOR EASY CONNECTIONS USER ACCESSIBLE MOTOR ENABLE PINS FACILITY ON BOARD V POWER REGULATOR, NO NEED TO GIVE EXTERNAL 5v POWER SUPPLY ON BOARD POWER LED AND POWER ON OFF SWITCH WIRE CONNECTOR FOR INPUT SIGNAL

30A Brushless Motor Speed Controller RC BEC ESC T-rex 450 V2 Helicopter Boat SU Features: BEC Power: Yes Cut Off Voltage: 4V BEC: Yes BEC Power: 1.5A/5V Reset: Throttle Lowest Con. Current: 30A Battery Range: 5-10 Cells Specification: Size: 57mm x 25mm x 8mm Net weight: 27g Package weight: 33g Color: Yellow Original box: NO Packing Content: 1 x 30A Speed Controller ESC

Product Description Description: Double H bridge drive Chip: L298N  Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm

Specifications Product Features                         Are you looking for the most unique sound system on the market? If so, you gotta get yourself The Water Dancing Speakers. Just plug these speakers into your IPod, MP3 player, or home computer and let the eye candy begin. These one of a kind speakers shoot water into the air while dancing to the rytham of your music. The four multi-colored LED lights, reflect off the water as it shoots out of the base creating many awesome visual effects. These speakers are light weight, portable and extremely versatile. Just add your favorite tunes, sit back and watch the wild light and water show that will be an instant hit with everyone. It's like having a mini night club at your fingertips. Water Dancing Speaker(2.0) with 4 colors ambience LED and sound control; sprinkle when music play; great for desktop decoration Wired fountain Speaker Features: Mini speaker design with decent looking. USB 5V power supply with easy using Built-in sound control system, water dancing while clapping or music beats Compatible with MP3PC and CD Player 5-volt USB external power supply, the moment the maximum current is less than 1.2A 3.5 audio plug. 2.1 channel with anti-break the sound function. 3W speakers 2, left and right stereo. lighting effects: primary and secondary speakers each a highlighted red, blue, and green and yellow four-color lights. hitting the water unit, 5V motor for moving source. Warranty 1 Month Vendor Warranty Against any Manufacturing Defect In The Box 1 x Pair of Fountain Speaker                                          1 x USB Cable                                          1 x  Audio Cable                                                    3.5  mm jack                                                                                                                                        

The listing consist each of one module. 7 Segment Display 4 Digit LED Display module(41) TCS230/TCS Color Recognition Sensor Module for MCU... AT24C256 Serial EEPROM Module I2C EEPROM Data Storage M... 25PCS PACK of FEMALE TO FEMALE DUPONT JUMPER WIRE CONNE... USB Tiny ISP 2.0 Downloader for Arduino(124) Adjustable Pulse Generator Module For Arduino New 1pc 5... FT232RL FT232 USB TO TTL 5V 3.3V SERIAL ADAPTOR FOR AR... High Quality USB 2.0 Extension Cable Male to Female 1.0... Speed Measuring Sensor Counter Motor Test Groove Couple... VSB Infrared receiving remote control module(3) 3mm LED Combo of 5Each (WHITE + GREEN + YELLOW + RED... 10 meters Single core breadboard jumper hookup wire in... 0.9V-5V to 5V DC-DC Booster Module USB Mobile Step-up P... 5v Micro USB 1A Lithium Battery Charging Module B... 2 Piece 6 x 6 Button module for Arduino(45) 5mm RGB LED - Common Cathode | Clear | 4 LEG | 1 Set =... 3 Colour RGB SMD LED Module full color Pwm tri-col... 5V Stepper Motor 28BYJ-48 With Drive Test Module Board...

RC COMBO !!! KV Brushless Motor + 30A ESC Speed Controller + Propellers CW & CCW pair   KV Brushless Motor + 30A ESC Speed Controller + Propellers CW & CCW NOTE- If you demand more than 1 Combo-pack we will modify the listing, please call 0 or email >>> Make your own Copter with this combo kit made by TechDelivers.com Specifications: BLDC MOTOR- KV: Max. efficiency: 80% Max. efficiency current: 4-10A (>75%) Current capacity: 12A/60s No Load current @ 10V: 0.5A No. of cells: 2-3 Li-Poly Motor size: mm / in Shaft diameter: 3.17mm / 0.1in Weight: 48g / 1.7oz 30A Brushless Speed Controller- High rate PWM Low resistence Input voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC: 2A / 5V (Linear mode) Max speed: rpm for 2 poles Brushless Motor, rpm for 6 poles Brushless Motor, rpm for 12 poles Brushless Motor. User programmable brake Low voltage auto setting based on battery Throttle range self-adjusting Soft start ramp up  Auto motor cutoff with reset Runs motor