Ac dc 220v 5v

Description The ACS712 Current Sensor Module is an analog input that provides accurate measurement of AC and DC currents. Current sensors are used to monitor the amount of power a circuit consuming. This current sensor module can handle AC or DC currents up to 5A. A single analog output signal connects to your microcontroller to provide the sensor readings. This module operates at 5V. Highly relaible fully compatible Easy to use Connect a 5V power supply to the Voltage (V) and common Ground (G) pins. Connect the analog Signal (S) output pin to an analog input on your microcontroller. Connect the circuit to be measured to the screw terminals. The analog output signal will be proportional to the amount of current passing through the screw terminals. Technical parameters: pin 5V power supply, on-board power indicator there is no the detection current through, the output voltage is VCC / 2 the PCB board size: 27.4 (mm) x11.8 (mm)   Package Includes: 1 Piece new  AC / DC 5A Current Sensing Module ACS 712 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The ACS712 Current Sensor Module is an analog input that provides accurate measurement of AC and DC currents. Current sensors are used to monitor the amount of power a circuit consuming. This current sensor module can handle AC or DC currents up to 5A. A single analog output signal connects to your microcontroller to provide the sensor readings. This module operates at 5V. Highly relaible fully compatible Easy to use Connect a 5V power supply to the Voltage (V) and common Ground (G) pins. Connect the analog Signal (S) output pin to an analog input on your microcontroller. Connect the circuit to be measured to the screw terminals. The analog output signal will be proportional to the amount of current passing through the screw terminals. Technical parameters: pin 5V power supply, on-board power indicator there is no the detection current through, the output voltage is VCC / 2 the PCB board size: 27.4 (mm) x11.8 (mm)   Package Includes: 1 Piece new  AC / DC 5A Current Sensing Module ACS 712 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

http://poweradapterplaza.com/5v-ac-dc-power-adapter-for-hp-photosmart-r927-camera-p-26391.html 5V AC / DC power adapter for HP photosmart R927 camera 5V AC / DC power adapter for HP photosmart R927 camera Input voltage: 100V ~ 240Vac nbsp;50/60 Hz Output: 5V 2.5A Up to 13Watts All products are new and fully-tested OEM equivalent replacement parts Overload protection Short circuit protection Over temperature protection Power saver configuration 100% HI-POT tested 100% cycling burn-in

http://poweradapterplaza.com/ac-dc-power-adapter-for-pentax-optio-s6-camera-p-26443.html AC / DC power adapter for Pentax Optio S6 camera AC / DC power adapter for Pentax Optio S6 camera Input voltage: 100V ~ 240Vac nbsp;50/60 Hz Output: 5V 2A Up to 10Watts All products are new and fully-tested OEM equivalent replacement parts Overload protection Short circuit protection Over temperature protection Power saver configuration 100% HI-POT tested 100% cycling burn-in

DC 5V 3A Power Adapter Supply for Multipurpose electronic Use   image is indicative. supplied item is not with indicator led       100% Brand new 100V - 240V AC to DC charger Adapter  Input: 100V-240V Output: DC 5V mA         

Pictures of battery are for illustration purposes only. Important Note: Designs/Colours/could be changed without prior notice. UNIVERSAL AC DC ADAPTER ADAPTOR 3V 4.5V 6V 7.5V 9V 12V 500mA 6 Watt 5Pin  Specifications:  Input voltage: 230V AC, 50Hz/60Hz  Output Voltage: 3V / 4.5 / 6V / 7.5V / 9V / 12V DC  Maximum Output Current: 500mA  possibility of changing the polarity.  Equipped with 5 universal connectors for power.  can be used to power low power electronics such as Walkmans, phones, toys, video games and  other battery-powered devices.  • Input: AC 220v, 50Hz.6Watt • Output: DC  3V, 4.5V, 6V, 7.5V 9V and 12V, 500mA   6 WATT For any other details of the product or any other queries                                                                                   (Confirmed Reply within 1Hr to 24 Hrs) PLEASE CALL ME Murari Lal [TIME: AM TO 7.30 PM......PLEASE S DON'T CALL  AFTER 7.30 PM] (MONDAY TO  SATURDAY)

Mastech MS True RMS AC/DC Current Clamp Meter Mastech MS Clamp Meter Counts 600A 600V This meter is a portable professional measuring instrument with LCD and back light easily reading.. Single rotating switch makes operation easy. Overload protection and low battery indication are provided. It is the best instrument of practical applications for professional, workshop, school, hobby and home use. Specification: 1. Conform to the IEC & IEC standard 2. Double insulation (protection class 600V CAT III and pollution degree 2) 3. Inrush function 4. The over-molding rubber case protects the meter to be stronger 5. Clamp on frequency function 6. Auto range/manual range 7. Data hold 8. Maximum/minimum value measurement 9. Auto power off 10. Back light 11. Jaw lighting 12. Display: counts 13. DC current: 66A/600A +-. AC current: 66A/600A +-. DC voltage: 660m/V +-. AC voltage: 660m/V +-. Resistance: k/66k/660k/6.6MOhm +-MOhm +-. Capacitance: 6.6u/66u/660u/6.6m/66mF +-. Frequency: 10 to 10kHz +-2.0% (from test terminal) 20. Frequency: 10 to 1kHz +-2.0% (from current clamp) 21. Duty cycle: . Continuity checking with buzzer 23. Diode test 24. MAX. Diameter for conductor: 26mm 25. Power: 1.5V (AAA) x 3 (not included) 26. Size: 208mm x 78mm x 35 mm Package Contents: 1 x Digital Clamp Meter 1 x Carrying Case 1 x Test Leads Warranty & Return Policies     Returns accepted within: 7 Days     Refund given as: Refund     Return shipping paid by: Seller     Warranty type: Replacement Warranty     Warranty duration: 1 Year Contact: ,

1 x ACS712 30A AC / DC  CURRENT SENSING MODULE ARDUINO, ARM and other MCU *** MUST HAVE FOR STUDENTS  AND HOBBYIST ***  This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 30A of DC or AC current. Product description: Current sensor chips: ACS712ELC-30A Pin 5V power supply, on-board power indicator Can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A No test current through the output voltage is VCC / 2 PCB board size: 31 (mm) x13 (mm) Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact! You Will Get: ACS712ELC-30A module  = 1 pcs Shipment Details: We ship the item anywhere

http://poweradapterplaza.com/panasonic-ac5vhsus-ac-dc-power-adapter-equiv-p-26419.html Panasonic AC-5VHS-US AC / DC power adapter (equiv) Panasonic AC-5VHS-US AC / DC power adapter (equiv) Input voltage: 100V ~ 240Vac nbsp;50/60 Hz Output: 5V 2.5A Up to 13Watts All products are new and fully-tested OEM equivalent replacement parts Overload protection Short circuit protection Over temperature protection Power saver configuration 100% HI-POT tested 100% cycling burn-in

This breakout board helps you switch AC devices. It has 4 channels that it can switch. It is compatible with Arduino, AVR, PIC and other micro-controllers.  The relay operates on 5V DC.  Relay Specifications Relay terminals are accessible with screw terminals The on board relay can handle current upto 10A Downloads Datasheet Schematic

Product  description: Current sensor chips: ACS712ELC-30A Pin 5V power supply, on-board power indicator Can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A No test current through the output voltage is VCC / 2 PCB board size: 31 (mm) x13 (mm) Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact! Package Include: 1X  ACSA MODULE   SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you  

DC Cable/ Cord for Apple Macbook Pro Mag Safe 13--MGV AC 60w 16.5v 3.65a Battery Charger Adapter   Note: Its Compatible Cable just like Original.   Compatible For: No Need to Change Adapter- Just change Adapter DC Cord of 40v, 60v, 85v Adapters of Apple   Dealers Welcome for Orders

http://poweradaptercord.com/5v-25a-barrel-5521mm-eu-2pin-plug-af1805e-p-3794.html5V 2.5A Barrel 5.5/2.1mm EU 2-Pin Plug AF1805-E $24.53 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $22.08 5 - 9 $20.85 10 - 19 $19.62 20 - 199 $18.40 200 + $17.66 5V 2.5A Barrel 5.5/2.1mm EU 2-Pin Plug AF1805-E D-Link AF1805-E AC Adapter 5V-12V Item Condition New Warranty 1 Year(s) Part Description D-Link AF1805-E AC Adapter 5V-12V 5V 2.5A, Barrel 5.5/2.1mm, EU 2-Pin Plug Part Number AF1805-E Info Input Current: 100V to 220V~50Hz

Positive Power Supply Board - 5V Description Positive power supply board. Its basically takes an input of 7-20V AC or DC and outputs a constant voltage of 5V. It can supply a maximum of 1A of current at 5V.   The board comes with appropriate rectification, filtering circuit, a power indication LED and mounting holes for easy mounting.   The Power Supply Mini Board is the ideal solutions, providing a postive supply at constant out for projects & systems etc.     Feature Suitable for 7-20V AC/DC input with PCB Terminals Power LED for Outputs +5V Output Termination Points Suitable for use with most +5V Microcontrollers

5V 4--Channel Relay Module for Arduino PIC ARM DSP AVR Electronic NEW Product Description 1. module with pine le relay control, ac voltage maximum 250 V, ac current maximum 10 A, dc voltage maximum 30 V, dc current maximum 10 A;  2. the transistor drive, drive ability;  3. working voltage 5 V  4. has the fixed bolt hole and easy installation  5. small board PCB size: 7.2 cm * 4.8 cm  6. weight ：60 g Package included: 1 PCS Rs. 410 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post