Adapter board

SOIC8 SOP8 Chip IC test clip adapter board cable BIOS EEPROM spare parts SOP8 SOIC8 test clips. Perfect for read write sop8 ICs   Product Description: ·         SOP8/SOIC8 clip provides a convenient way to read or write SOP8/SOIC8 chips. ·         By this IC clip, it is not necessary to desolder the chip from the board to reprogram it or to read it.  ·         It is also not necessary when you are programming new chips (for example BIOS chips) to solder these chips on a SOP8 / SOIC8 adapter board.  ·         This IC clip is a perfect addition to a programmer   Technical specifications:   ·         High Quality IC Clip for SOP8 and SOIC8 chip packages   ·         Adapter board for SOP8 und SOIC8 chip packages ·         cable length: 28cm   Usage Instruction:   1.      The first pin of chip corresponds to red marked wire and first pin of PCB pin header identify correspond to the first pin of Programming device. 2.      Press the clip tail with your finger first, you can see the metal shrapnel when the clip is open and stretch it to the appropriate width for catching the chip. 3.      The top will stick to the PCB and the metal shrapnel should align with the PIN of IC before clamping, then relax your fingers slowly 4.      Metal shrapnel will be pushed into the plastic as the clip is closing and the clips will be clenched with plastic sheet by IC. 5.      You have to adjust the clip when it is not

8 Servo Adapter Board is a small board which offers connection/interface to upto 8 servo's via a standard 10 pin (5x2) box header connector. Power supply for the servos is sourced via separate onboard screw terminal connector with LED indicator Well marked berg connector for connecting servos Four mounting holes of 3.2 mm each PCB dimensions 60 mm x 25 mm

See our ratings Add this shop to my favorites XBee/ZigBee Adapter board with RS232 Interface and LED Indicators ₹ Availability:

Our simple LCD Adapter Board offers an easy way to interface a standard 16X2 LCD to your project. Supply sourced through the interfacing Box Header connector Interfacing is via standard box header connector Contrast control preset also available PCB dimensions 42 mm x 24 mm

Our simple GLCD Adapter Board offers an easy way to interface a standard GLCD to your project. 5 VDC supply sourced through the interfacing Box Header connector Two separate box header connector available for interfacing of data bus and control bus to the interfacing unit Contrast control preset also available PCB dimensions 52 mm x 33 mm GLCD Included

D SUB 25D Gender Changer Adapter Board (O054)   PCB dimensions 30MMX33MM Onboard 25PIN Female Header for Aux connector 25D-Sub Male to Female Connector

Product Description 1. ATMEL ISP standard 10PIN convert to standard 6PIN interface 2. 10PIN to 6PIN ISP Adapter board  Package Included: 1pcs 10 Pin to Standard 6 Pin Adapter Board for ATMEL AVRISP USBASP STK Pin To 6 Pin Programming Adaptor Quick Overview Perfect For Programming Any 6 Pin Programmable Boards Such As Arduino Boards.  Details In The Avr Isp (In System Programming). 6 Pin Or 10 Pin Frc Connectors Are Used. If Your Avr Isp Programmer Have 10 Pin Frc Connector And The Target Microcontroller Has 6 Pin Frc Connector For Isp Or Vice Versa Then 6 To 10 Pin Avr Isp Converter Is Very Handy For Insuring Compatibility Between Any Type Of Frc Connectors Between Programmer And The Target Board. Shipping: by speed post plz make sure speed post service is available at your city, generally takes 3-7 days to deliver after getting cleared payment Feedback: plz give 5 star ratings and positive feedback its very important for us

use coupon  COUPONDUN8 to get 7.5 % off Product Description 1. ATMEL ISP standard 10PIN convert to standard 6PIN interface 2. 10PIN to 6PIN ISP Adapter board  Package Included: 1pcs 10 Pin to Standard 6 Pin Adapter Board for ATMEL AVRISP USBASP STK Pin To 6 Pin Programming Adaptor Quick Overview Perfect For Programming Any 6 Pin Programmable Boards Such As Arduino Boards.  Details In The Avr Isp (In System Programming). 6 Pin Or 10 Pin Frc Connectors Are Used. If Your Avr Isp Programmer Have 10 Pin Frc Connector And The Target Microcontroller Has 6 Pin Frc Connector For Isp Or Vice Versa Then 6 To 10 Pin Avr Isp Converter Is Very Handy For Insuring Compatibility Between Any Type Of Frc Connectors Between Programmer And The Target Board. Shipping: always free by speed post please make sure speed post service is available at your city, generally takes 3-7 days to deliver after getting cleared payment Feedback: please  give 5 star ratings and positive feedback it's very important for us

Product Description 1. ATMEL ISP standard 10PIN convert to standard 6PIN interface 2. 10PIN to 6PIN ISP Adapter board  Package Included: 1pcs 10 Pin to Standard 6 Pin Adapter Board for ATMEL AVRISP USBASP STK Pin To 6 Pin Programming Adaptor Quick Overview Perfect For Programming Any 6 Pin Programmable Boards Such As Arduino Boards.  Details In The Avr Isp (In System Programming). 6 Pin Or 10 Pin Frc Connectors Are Used. If Your Avr Isp Programmer Have 10 Pin Frc Connector And The Target Microcontroller Has 6 Pin Frc Connector For Isp Or Vice Versa Then 6 To 10 Pin Avr Isp Converter Is Very Handy For Insuring Compatibility Between Any Type Of Frc Connectors Between Programmer And The Target Board. Shipping: always free by speed post please make sure speed post service is available at your city, generally takes 3-5 days to deliver after getting cleared payment Feedback: please  give 5 star ratings and positive feedback it's very important for us

100 % GENUINE!!!  IMPORTED!!!  QUALITY CHECKED!!! LIMITED STOCK LOWEST PRICE CHALLENGE!!! Product Description 1. ATMEL ISP standard 10PIN convert to standard 6PIN interface 2. 10PIN to 6PIN ISP Adapter board  Package Included: 1 pcs 10 Pin to Standard 6 Pin Adapter Board for ATMEL AVRISP USBASP STK Pin To 6 Pin Programming Adaptor Quick Overview Perfect For Programming Any 6 Pin Programmable Boards Such As Arduino Boards.  Details In The Avr Isp (In System Programming). 6 Pin Or 10 Pin Frc Connectors Are Used. If Your Avr Isp Programmer Have 10 Pin Frc Connector And The Target Microcontroller Has 6 Pin Frc Connector For Isp Or Vice Versa Then 6 To 10 Pin Avr Isp Converter Is Very Handy For Insuring Compatibility Between Any Type Of Frc Connectors Between Programmer And The Target Board.  SHIPPING: all over india By speed post  (plz make sure speed post service is available at your city), generally takes 3-7 days to deliver FEEDBACK: PLZ GIVE 5 STAR RATINGS AND  POSITIVE  FEEDBACK  IT'S VERY IMPORTANT FOR US 100% positive feedback and satisfaction of buyers are our moto

New Double-Side SMD SOT23-3 to DIP SIP3 Adapter PCB Board DIY Converter Description: The PCB board has two sides. A side and B side it can be used to convert SOT23 (Pin pitch 0.95mm) to SIPmm pin pitch). The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm PCB board or breadboard. Package content: 5-pcs DIP Converter PCB Board

New Double-Side SMD SOT23-3 to DIP SIP3 Adapter PCB Board DIY Converter Description: The PCB board has two sides. A side and B side it can be used to convert SOT23 (Pin pitch 0.95mm) to SIPmm pin pitch). The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm PCB board or breadboard. Package content: 4-pcs DIP Converter PCB Board

Genuine  HP C AC Adapter OfficeJet Pro Series Printers Power Supply Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.   HP C Printer AC Power Adapter 32V mA(ORIGINAL POWER ADAPTER). POWER ADAPTER PICTURE SHOWN IN DISCRIPTION MAY BE DIFFERENT BUT SAME IN TECHNICAL CONFIGURATION AS HP C Item Description Item Condition:Used HP  C Printer AC Power Adapter 32V mA. Manufacturer: HP Part Number: C Input Power: V  ` HZ mA Output Power: 32VDC mA

  Genuine  HP C8187-60034 AC Adapter OfficeJet Pro Series Printers Power Supply Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.   HP C8187-60034 Printer AC Power Adapter 32V 1800mA(ORIGINAL POWER ADAPTER). POWER ADAPTER PICTURE SHOWN IN DISCRIPTION MAY BE DIFFERENT BUT SAME IN TECHNICAL CONFIGURATION AS HP C8187-60034 Item Description Item Condition:Used HP  C8187-60034 Printer AC Power Adapter 32V 1800mA. Manufacturer: HP Part Number: C8187-60034 Input Power: 100-240V  `50/60 HZ 1800mA Output Power: 32VDC 2500mA

Product Description This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector. One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. Powered by Turbo Lister

Genuine HP Printer AC Power Adapter V mA 16V mA Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.  . HP AC ADAPTER Condition: Used Content: One Adapter only.. (HP original power adapter) FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

Package Contents   1 x PIC development Board with Free USB cable and CD containing software examples.   External Power supply NOT Included.    Contact Details   Have any Queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"    The PIC development board is a microcontroller board based on the PIC16F877. It has 33 input/output pins and two PWM outputs, 8 (10 bit) analog inputs, a works upto 20 MHz speed. A USB connection is available for programming and UART (communication with the PC), an external power jack is provided for high current motor applications etc. A Reset button is present. A 4 x 4 key matrix is provided for keyscan applications. A 16 x 2 LCD with programmable backlight is provided. A Piezo Buzzer is present. A 4 digit 7 segment common cathode display is populated for display multiplexing example. A onboard potentiometer is provided on one analog channel. A coin cell battery backed DS (RTC) is present on one of the I2C channel. An optional SPI external EEPROM (not provided with the board) can be mounted by the user for SPI memory. A ULN based stepper motor interface is present.   The Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. FEATURES AND USAGE The maximum length and width of the Board is approx 7 inch by 5.5 inches. Four PCB studs allow the board to be attached to a surface or act like a support stand. All the ports of the microcontroller are available as edge connectors on the right side of the board on a standard 100 mil spacing. The board can also take most of the 40 Pin DIP PIC18 series microcontrollers. An External programmer may be needed

Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.   HP Printer AC Power Adapter 32V mA(ORIGINAL POWER ADAPTER). Item Description Item Condition:Used HP Printer AC Power Adapter 32V mA. Manufacturer: HP Part Number: Input Power: V  ` HZ 1A Output Power: 32VDC mA

Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.   HP 0957-2283 Printer AC Power Adapter 32V 2000mA(ORIGINAL POWER ADAPTER). Item Description Item Condition:Used HP 0957-2083 Printer AC Power Adapter 32V 2000mA. Manufacturer: HP Part Number: 0957-2283 Input Power: 200-240V  `50/60 HZ 1A Output Power: 32VDC 2000mA

30V 333mA hp printer  ac adapter for HP Deskjet All-in-One Printer series.                                                                                                                                         (Original Power Adapter) Input: V 300mA Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

30V 333mA hp printer  ac adapter for HP Deskjet All-in-One Printer series.                                                                                                                                         (Original Power Adapter)                                                              Input: V 165mA Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

  30V 333mA hp 0957-2286 0957-2290 printer  ac adapter for HP Deskjet 1050 2050 All-in-One Printer series.                                                                                                                                         (Original Power Adapter)                                                              Input: 100-240V 165mA 50/60Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

  30V 333mA hp 0957-2286 0957-2290 printer  ac adapter for HP Deskjet 1050 2050 All-in-One Printer series.                                                                                                                                         (Original Power Adapter) Input: 100-240V 300mA 50/60Hz Output: DC +30V @ 333mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

  The ARM7 Development Board comes with NXP’s LPC2148 microcontroller. The microcontroller can be programmed through the serial port using the on-chip serial bootloader. The board features various interfaces available on-board like LEDs, Push Buttons, Analog Input, Dual-RS232 port, EEPROM, Power Amplifier, USB connector, Buzzer, Character LCD and dedicated connectors to plug-in a Temperature Sensor, Distance measurement sensor, Accelerometer, micro SD Card and an XBEE wireless device. A JTAG connector is also provided to enable programming and debugging of the microcontroller. The board can be powered using an external power source like an adapter or can be powered using the USB port on the computer. The ARM7 Development board has been designed for optimal use of the peripherals on-chip and interfaces on-board to create a variety of applications. Features An on-board NXP’s LPC2148 microcontroller with ARM7 architecture. A power jack for an external power supply from 8 to 16V AC/DC. Alternatively the board can be powered through the on-board USB connector. A 16x2 Character LCD interface operating

                                                                                                   (Original Power Adapter)                                                              Input: 200-240V 200mA 50/60Hz Output: DC +22V @ 455mA LPS low energy consumption Power LED monitor Power cable cord included Dear sir/Madam. These power adapters are Original Hp  Power Adapter comes with hp printers (Not Oem or Duplicate). Duplicate power adapters may harm your printer circuit board(logic board) so please buy   Original Hp   Power Adapters from us.    FeedBack Leaving Negative or Neutral Feedback will not solve a  problem, so please contact us if you have any questions or any complaints before  leaving a Feedback   Your  feedback is important for us to grow our business on , so please do leave  feedback,    !!! Thank You For Visiting our shop !!!

Description: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The Arduino Due can be powered via the USB connector or with an external power supply. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Product Description: 100% New, RoHS Compliant. This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips. A side for pin pitch size 1.27mm, It can be used for most of the SO、SOP、SOIC to 2.54mm DIP. B side for pin pitch size 0.65mm, It can be used for most of the SSOP、TSSOP、MSOP to 2.54mm DIP. Package content: 5 -pcs SOP8 SO8 SOIC8 TSSOP8 MSOP8 to DIP8 Converter PCB Board

PRODUCT DETAILS: Arduino UNO R3 Compatible Board ATmega328P ATmega16U2 with USB cable DESCRIPTION This is a Compatible board for Arduino uno r3, not original This UNO is a 100% compatible derivative of current R3 Arduino UNO The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller;simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Features:- Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Quad Processor Q8200  (4M Cache, 2.33 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Duo Processor E6850  (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line