Ads1115 16 bit adc

Seal pack 1 quantity only **Not used new condition** ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project which needs an analog-to-digital converter or when you want a higher-precision ADC. ADS1115 16-Bit ADC- provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels. Additionally, ADC also includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter. The ADS1115 chip is fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115’s connect on a single 2-wire I2C bus for 16 single end inputs.

MICROCHIP  PIC24HJ128GP202-I/SO  MICROCONTROLLER MCU, 16 BIT Product Information: Controller Family/Series: PIC24HJ Embedded Interface Type:   I2C, SPI, UART MCU Case Style:             SOIC No. of I/O's:              2 1 No. of Pins:                28 Program Flash Memory:      128KB R AM Memory Size:          8 KB Timers:                   Five 16 bit        UART:                     2         SPI:                       2          External Interrupts:      3          RTCC:                     1          I2C:                      1          CRC Generator:            1         ADC (Channels):           10          Remappable Peripheral For more detail visit microchip website. Shipping: - Shipping is all over India. Please Provide Complete Address and phone number. - We usually ship within same business day except Sunday or public holiday's. In case of any claim or complaints please contact us before leaving any negative feedback. And we will try our best to resolve your issue For Any Queries Please Call us on: + or you can e-mail us at

Package includes: 1 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

Package includes: 1 x Atmega8l-8PU + Free 28 Pin base(socket) Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

Package includes: 10 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.