Antenna two long high range

GSM: 850/ 900/ 1800/ 1900 MHz GPRS: Class12, TCP/ IP build in GSM Module GPS: MT3326 GSM antenna: built-in quad band GPS antenna: built-in GPS high gain ceramics patch antenna. GPS Channels: 20 Tracking sensitivity: -159dBm Acquisition sensitivity: -144dBm Locating time cost: Hot start: Warm start: Cold start: Application environment: Operating temperature: -25℃ to +60℃ Operating humidity: 5% to 95% non-condensing Battery: 3.7vDC/450mAh Monitoring range: 5M Working voltage/current: 9-36 vDC/90mA LED indicator: Three LED indicator: GPS-blue, GSM-green, Power-red Dimensions: 98.0(L)× 52.0(W)× 15.0(H)mm Weight: 80g Certifications: e-mark

GSM：MTK6223D GSM：Quad band 850/ 900/ 1800/ 1900 MHz GSM Antenna：Built-in quad band bracket antenna GPRS：Class12 GPS：MT3326 Frequency：L1, 1575.42MHz C/A code GPS Channels：20 Tracking Sensitivity：-159dBm Acquisition Sensitivity：-144dBm Locating time cost：Hot start ： Warm start ： Cold start ： GPS antenna：Built-in high gain ceramic Patch antenna Voltage input range：9-36vDC LED indicator：GPS-blue GSM-green Power-red Application environment：Operating temperature：-30℃to +80℃ Operating humidity：5% to 95% non-condensing Dimensions：90.0（L）× 45.0（W）× 13.6（H）mm Weight：45g Features: ● To operate with GPS/GSM/GPRS wireless network. ● Built-in high accuracy MTK GPS chips. ● Built-in GSM/GPS antennas. ● Check location information via SMS or GPRS (TCP). ● Real-time tracking. ● To start working automatically after connecting to power. ● Built-in monitoring CPU, eliminating breakdown automatically. ● Built-in ON/OFF power, wide voltage input range. ● Built-in acceleration sensor for saving power intelligently and resisting static drift. ● Installation method: covert or open. ● Connect to car charger or car battery. ● Three LED indicator: GPS-blue, GSM-green, Power-red. ● Check location via platform. Image may contain: phone

The project is designed to control a robotic vehicle by using a RF technology for remote operation. A low power laser light is interfaced for demonstrating the possibilities of destroying a distant object by its beam. An series of microcontroller is used for the desired operation. At the transmitting end using push buttons, commands are sent to the receiver to control the movement of the robot either to move forward, backward and left or right etc. At the receiving end two motors are interfaced to the microcontroller where they are used for the movement of the vehicle. The RF transmitter acts as a RF remote control that has the advantage of adequate range (up to 200 meters) with proper antenna, while the receiver decodes before feeding it to another microcontroller to drive DC motors via motor driver IC for necessary work. A laser pen is mounted on the robot body and its operation is carried out from the microcontroller output through appropriate signal from the transmitting end. The laser light used is just for demonstration purpose and not a powerful one. Further the project can be enhanced using DTMF technology. Using this technology we can control the robotic vehicle by using cell phone. This technology has an advantage over long communication range as compared to RF technology. BLOCK DIAGRAM FOR TRANSMITTER BLOCK DIAGRAM FOR RECEIVER HARDWARE REQUIREMENTS: series Microcontroller, Push Buttons, RF module, Encoder, Decoder, Motor driver IC, DC motors, Resistors, Capacitors, Diodes,  Batteries, Laser Pointer SOFTWARE REQUIREMENTS: Keil compiler Languages: Embedded C or Assembly

The project is designed to control a robotic vehicle by using a RF technology for remote operation. A low power laser light is interfaced for demonstrating the possibilities of destroying a distant object by its beam. An 8051 series of microcontroller is used for the desired operation. At the transmitting end using push buttons, commands are sent to the receiver to control the movement of the robot either to move forward, backward and left or right etc. At the receiving end two motors are interfaced to the microcontroller where they are used for the movement of the vehicle. The RF transmitter acts as a RF remote control that has the advantage of adequate range (up to 200 meters) with proper antenna, while the receiver decodes before feeding it to another microcontroller to drive DC motors via motor driver IC for necessary work. A laser pen is mounted on the robot body and its operation is carried out from the microcontroller output through appropriate signal from the transmitting end. The laser light used is just for demonstration purpose and not a powerful one. Further the project can be enhanced using DTMF technology. Using this technology we can control the robotic vehicle by using cell phone. This technology has an advantage over long communication range as compared to RF technology. BLOCK DIAGRAM FOR TRANSMITTER BLOCK DIAGRAM FOR RECEIVER HARDWARE REQUIREMENTS: 8051 series Microcontroller, Push Buttons, RF module, Encoder, Decoder, Motor driver IC, DC motors, Resistors, Capacitors, Diodes,  Batteries, Laser Pointer SOFTWARE REQUIREMENTS: Keil compiler Languages: Embedded C or Assembly

100% Brand New and Quality Guaranteed. This lamp has Two lines, the positive wire line and the negative wire line，Very easy to connect.100% Brand New and Quality Guaranteed.         ★ This lamp has Two lines, the positive wire line and the negative wire line，Very easy to           connect.       ★ Light Color: Emit Super Bright White Color Light.        ★ Power: High Power CREE 18W.   100% Brand New and Quality Guaranteed.         ★ This lamp has Two lines, the positive wire line and the negative wire line，Very easy to           connect.       ★ Light Color: Emit Super Bright White Color Light.        ★ Power: High Power CREE 18W.        ★ High Power and Super Bright, bring you more safety when driving.        ★ Low power consumption (90% power saved compared with traditional bulb).        ★ Reverse polarity protection.        ★ Plug and play, no modification required.        ★ Long service life and low power consumption.        ★ Installed simply, good looking and utility.        ★ Universal for all auto car engineering vehicle truck bus SUV ATV boat motorcycle bike.       ★ Enhance lighting in rainy and foggy days to avoid traffic accident.          Note：      1、must be used within specified voltage and temperature range        2、you must turn off the power during installation.        3、please adjust the angle spotlights, do not direct the other eye, so as not to affect the safety of others.        4、shall not be used in explosive environments       Package Content:     1pc Car LED Work Light. Plug and play, no modification required. ★ Long service life and low power consumption. ★ Installed simply, good looking and utility. ★ Universal for all auto car engineering vehicle truck bus SUV ATV boat motorcycle bike. ★ Enhance lighting in rainy and foggy days to avoid traffic accident. Note： 1、must be used within specified voltage and temperature range 2、you must turn off the power during installation. 3、please adjust the angle spotlights, do not direct the other eye, so as not to affect the safety of others. 4、shall not be used in explosive environments Package Content: 1pc Car LED Work Light.

set of 2 pcs          100% Brand New and Quality Guaranteed.            ★   This lamp has Two lines, the positive wire line and the negative wire line ， Very   easy to           connect.        ★ Light Color: Emit Super Bright White  Color Light.         ★  Power: High Power CREE 18W.         ★  High Power and Super Bright, bring you more safety when driving.         ★  Low power consumption (90% power saved compared with traditional bulb).         ★  Reverse polarity protection.         ★  Plug and play, no modification required.         ★  Long service life and low power consumption.         ★  Installed simply, good looking and utility.         ★  Universal for all auto car engineering vehicle truck bus SUV ATV boat motorcycle bike.        ★  Enhance lighting in rainy and foggy days to avoid traffic accident.           Note：       1、must be used within specified voltage and temperature range        2、you must turn off the power during installation.        3、please adjust the angle spotlights, do not direct the other eye, so as not to affect the safety of others.        4、shall not be used in explosive environments        Package Content:     2pcs Car LED Work Light. 　 　 　 　 　 　 　 　 　 　 　

Seeking for Agent partners 1. Introductory Remarks Driven by the dual pressure of emission regulations and energy consumption, vehicles electrification has become the recognized future evolution direction of the global automobile industry, and the whole industry is accelerating the electrification strategy in full gear. The motors and motor controllers of new energy vehicles, as the two major types of components in the automobile industry, have broad development prospects and business opportunities. Based on the automotive electrification era background, Shenzhen Greatland Electrics Inc. (GLE) is open to the world for developing business agents. 2. Company Profiles Shenzhen Greatland Electrics Inc. (GLE) originated from Shenzhen BeiLai laboratory, which was a government sponsored scientific research institution specialized in high-performance PMSM and motor drive system since 1995. Now, GLE is a subsidiary of China Baoan Group, and specializes in researching, developing, producing and marketing Permanent Magnet Synchronous Motor, AC induction motor and drive control system. GLE has accumulated rich experience in research and the volume production of motor drive systems. GLE possesses completely independent intellectual property of its motors & motor controllers, and has the capability to provide customized products with professional solutions. GLE is an ISO9001, ISO14001, OHSAS18001 and IATF16949 certified company and its state of art ZunYi factory was built with a production capacity of 500,000 sets of motor drive systems per year. 3. GLE Advantage (1) Profound Technical Accumulation GLE has been engaged in drive motor and motor control system technology research and development since 1996, and is the first enterprise of motor drive system to enter the field of new energy vehicles and the first one to start the research of new energy vehicle drive system. (2) A wide range of customer applications GLE is one of the earliest professional enterprises in the industry to cooperate with the OEMs automotive manufacturers, and also the first one to have mass production of new energy vehicle motor drive system in China. At present, GLE has accumulated a high reputation in the new energy automobile industry Major clients: CHERY KARRY, CCAG, CHINA FAW, JIANGLING, KING LONG, CHANGCHENG, GEELY, DONGFENG, HEAVY DUTY TRUCK GROUP, CHONGQING SOKON, SHANDONG LICHI, LIUZHOU WULING, LINGTU 4. How GLE support the agent (1)Technical Services: a. GLE actively provides product training and technical support to agents b. According to the needs of agents, professional engineers can be sent to the customer’s site for technical training. c. According to the needs of agents and users, professional engineers can be sent to customer’s site for installation, debugging and solve technical problems (2) Sales Service a. GLE can arrange sales managers or technical engineers on a regular or irregular journey to assist agents to actively operate the market. b. GLE can give special and appropriate sales policy for specific areas/projects. c. GLE can provide unified product brochure, do brand and product promotion in different markets around the world. d. During the warranty period, free maintenance shall be provided if It is the product's own problem. 5. GLE Product Platform (1) Low-speed vehicle platform: MOS+SMA series (2) Passenger vehicle platform: AMC+CML series (3) Commercial vehicle platform: IMC+BML series The product category involves Passenger car, Bus, Special vehicle, Low speed car and so on 6. Cooperation Conditions of agents (1) Enterprise should have legal operation procedures, good business credit and professional ethics. (2) Have the right brand sales awareness and concept (3) Have the spirit of cooperation (4) Have the necessary capital, storage and personnel to carry out the business (5) With a three-dimensional and multi-level sales network in the local area, have the ability to expand the market. Look forward to working with you to create a more brilliant future Contact information: Shenzhen Greatland Electrics Inc. Address: A7-3 Fuhai Technology Park, Qiao Tou, Fuhai Street, Bao An District, Shenzhen, China （518103） Tel: +86-755-2989 2115 Email:overseas@glelec.com