Base ball

The FB-36IIDDHi Ball Head with Panning Clamp from Sunwayfoto pairs an FB-36II ball head with the DDH-02i panning clamp. This combination enables you to take smooth and level panoramas. Weighing only 11.4 oz the ball head can hold up to 39.7 lb and stands 3.4 high.. This setup is ideal for shooting panoramas when your tripod is on unlevel ground allowing the ball head to act as a leveling base and the clamp to become a panning head. The ball head and clamp both pan a full 360 deg and have laser engraved index marks allowing you to precisely pan your camera for easy repeatability. The head has separate locks for the movement of the ball and the 360 deg panning for both the base and the clamp. An elongated lock for the clamp allows you to reach the lock even when using wide plates. The panning clamp has built-in safety stops and a bubble level.

Neewer Universal 360 Degree Rotate Mini Tripod Ball Head with 1/4" Screw Thread Base for DSLR Camera Camcorder Product Features This mini ballhead for digital cameras or camcorder with 1/4" screw thread base can be mounted on monopod, tripod, light stand etc. 360 degree panning and from -90 degree to +90 degree tilting for panoramic photography. Attachment(top): 1/4" male thread Attachment(bottom): 3/8" female thread(with 3/8" to 1/4" screw adapter) Load Capacity: 3.3lbs/1.5kg Description Features: This mini ballhead for digital cameras or camcorder with 1/4" screw thread base can be mounted on monopod, tripod, light stand etc. Can withstand heavy loads, lock solidly, and move smoothly. Aiming and horizon leveling can be accomplished as one instinctive motion, and rigid lockup takes just a quick twist of one control. Using this tripod ball heads are also much easier to carry and pack than tripods with pan-tilt heads no long protruding handles. 360 degree panning and from -90 degree to +90 degree tilting for panoramic photography. The independent adjustment knobs features for precise locking, panning and tension controls. All-metal material, sturdy and durable. Specifications: Material: Alluminum Alloy Attachment(top): 1/4" male thread Attachment(bottom): 3/8" female thread(with 3/8" to 1/4" screw adapter) Panoramic Rotation: 360 degree Crossrange: +90 to -90 degree Load Capacity: 3.3lbs/1.5kg Package Contents: 1x Mini Tripod Ballhead 1x 3/8" to 1/4" Screw Adapter Note: Camera and light stand are not included. Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

The Induro BHL3 Ball Head features separate controls for ball locking pan-base locking and tension to provide precise and reliable control over camera positioning. With its all-weather grip the oversized knob enables extremely strong ball locking which makes possible the head s remarkable load capacity of 88 lb. To accommodate different load sizes an independent tension dial is integrated into the ball-locking knob..The separate locks for tilt and pan mean that you can reliably perform tasks such as panoramic photography which require the camera s orientation to remain rock-steady while the position of the panning base changes. Around the base are degree markers that aid

The PA-20 Panning Base from Sirui attaches directly onto your tripod for 360 deg panning or can be placed on top of a ball head - converting the ball head into a panoramic head. It has an Arca-compatible base that slides directly onto any Arca-compatible heads quick release clamps. When attaching the PA-20 directly onto a tripod or monopod the foot is removed to expose a flat stable surface. The rotating base has engraved degree marks and allows you to make quick and easy adjustments your camera when shooting panoramas. The PA-20 is rated to hold up to 11 pounds and fits both 3 8 and 1 4 mounting studs.

The UBH 45X Ball Head with Bidirectional Clamp from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 45X stands 4.1 high and can hold up to 88.2 lb. It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. A hex key is included to allow you rotate the clamp 90 deg. The head comes with a carrying case to protect the head when it is not

The UBH 45 Ball Head from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 45 stands 4.1 high and can hold up to 90 lb (40 kg). It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. An X-Adapter is included to allow you to mount your camera with an attached plate aligned on the X-axis. The head comes with a carrying case to protect the UBH 45 when it is not

The UBH 35 Ball Head from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 35 stands 3.7 high and can hold up to 33 lb (15 kg). It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. An X-Adapter is included to allow you to mount your camera with an attached plate aligned on the X-axis. The head comes with a carrying case to protect the UBH 35 when it is not

Neewer Universal 360 Degree Rotate Mini Tripod Ball Head with 1/4"Screw Thread Base for DSLR Camera Camcorder Features: This mini ballhead for digital cameras or camcorder with 1/4" screw thread base can be mounted on monopod, tripod, light stand etc. Can withstand heavy loads, lock solidly, and move smoothly. Aiming and horizon leveling can be accomplished as one instinctive motion, and rigid lockup takes just a quick twist of one control. Using this tripod ball heads are also much easier to carry and pack than tripods with pan-tilt heads no long protruding handles. 360 degree panning and from -90 degree to +90 degree tilting for panoramic photography. The independent adjustment knobs features for precise locking, panning and tension controls. All-metal material, sturdy and durable. Specifications: Material: Alluminum Alloy Attachment(top): 1/4" male thread Attachment(bottom): 3/8" female thread(with 3/8" to 1/4" screw adapter) Panoramic Rotation: 360 degree Crossrange: +90 to -90 degree Load Capacity: 3.3lbs/1.5kg Note: Camera and light stand are not included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

The GorillaPod Micro 250 Tripod with Mini Ball Head - Black Gray isn t technically microscopic but you will have trouble seeing it when its legs are folded up and it s concealed underneath the base of your small point shoot camera. The Micro 250 is designed to be an always-on tripod which connects to your camera via its standard screw. It s just over half an inch thick when folded and it weighs only 0.9 oz so you ll never have a reason to remove it ndash it will fit comfortably with your camera inside almost any case..Fan out its legs and you suddenly have a stable base of support that will allow you to set your camera down on many objects surfaces to capture a rock-solid shot ndash whether a low-light landscape photo or a time-lapse video. The stainless-steel mini ball head of the GorillaPod 250 tilts up to 36 deg

The GorillaPod Micro 250 Tripod with Mini Ball Head - Black Blue isn t technically microscopic but you will have trouble seeing it when its legs are folded up and it s concealed underneath the base of your small point shoot camera. The Micro 250 is designed to be an always-on tripod which connects to your camera via its standard screw. It s just over half an inch thick when folded and it weighs only 0.9 oz so you ll never have a reason to remove it ndash it will fit comfortably with your camera inside almost any case..Fan out its legs and you suddenly have a stable base of support that will allow you to set your camera down on many objects surfaces to capture a rock-solid shot ndash whether a low-light landscape photo or a time-lapse video. The stainless-steel mini ball head of the GorillaPod 250 tilts up to 36 deg

The Novoflex Classic Ball 3 II Medium-Weight Ball Head is designed for professional and amateur photographers. This ball head features a true panorama panning base with 360 deg laser-engraved scaling at the bottom of the housing. To make use of the panorama function the ball head is being turned upside down thus allowing a 100% accurate leveling to avoid a sloped horizon while doing panorama shots. To support the leveling this ball head comes with an integrated bubble level. It eliminates the necessity to lengthen and shorten the legs of your tripod Quadropod to adjust. The combination of CB3 II and the MonoLite tilt head (sold separately) converts it into a 2-way tilt head with silky smooth movements

Ideal for lightweight digital cameras. weight with shoe: 70g (2.5oz) weight without shoe: 60g (2.1oz) Kit contains: *Ball head with male & female threads *Metal flash shoe mount with male 1 Multi-purpose micro tripoad 1/4" ball heads 　 　                                                                                                what's included:                                                                                                                       1 Ball head with male & female threads                                             1 Metal flash shoe mount with male thread and metal lock washer             Made of aluminum and brass           Height with shoe: 5.7cm (2.2")        Height without shoe: 4.7cm (1.85") Diameter of base: 2.4cm (0.95") Max load: 1.3kg (3  lbs)            Weight with shoe: 70g (2.5oz)       Weight without shoe: 60g (2.1oz)

The FB-28i Ball Head from Sunwayfoto is a compact and lightweight (7.3 oz) Arca-type compatible tripod head with a load capacity of 26.5 lb. It is CNC machined from aircraft-grade aluminum making it both lightweight and strong. The ball head has a large locking knob that controls the movement of the ball and a separate locking knob to control the panning of the head. A scale is located on the base of the head with an index direction mark for accurate panoramic stitches.

The Double Action V0 Ball Head from Benro features separate pan and positioning controls an Arca-Swiss style quick release plate system with double safety locks and an integrated Lock Limiter Tension Disk for drag control. Positive locking knobs control the ball head s movements. The head is constructed of precision-machined black magnesium alloy and can support up to 44 lb. An integrated bull s eye type bubble level helps maintain horizontal alignment. The base of the head connects to a tripod or monopod via a 3 8 quot -16 thread (1 4 quot -20 bushing also included) and the included quick release plate provides a 1 4 quot -20 screw mount.

The Novoflex ClassicBall 5 II Ball Head features a true panorama panning base with 360 deg laser engraved scaling at the bottom of the housing. To make use of the panorama function the ball head is being turned upside down thus allowing 100% accurate leveling to avoid a sloped horizon while doing panorama shots. To support the leveling the ClassicBall 5 II comes with an integrated bubble level. The necessity to lengthen and shorten the legs of your tripod QuadroPod to adjust leveling no longer exists. The ClassicBall is an all-metal design incorporating advanced polymer materials. As with other Novoflex products the ClassicBall was developed and is manufactured entirely at the company s plant

With this small Neiger 19 ball socket head Novoflex offers a small extremely firm ball head. It features a removable flash shoe mounted on a screw and a panorama panning base. Use it

The Sirui G-20X Ball Head is an extremely sturdy head with separate control knobs for pan tilt and tension plus an Arca-style clamp for the included quick-release plate. The ball locks down extremely tightly thanks to the double-bevel locking system which allows support of cameras up to 44 lb and safe 90 deg tilting for portrait orientation. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera plate from the clamp thereby adding to the head s overall security and stability..Three separate controls (pan tilt and lock) allow a photographer to exercise extremely fine control over the orientation of the camera whether it s a DSLR 35mm medium-format camera or even a camcorder. Pan for instance can be adjusted while the tilt stays locked enabling precise movement that s measurable via degree markers for panoramic photography at the panning base.

The Velbon UT 63D Aluminum Travel Tripod with QHD-63 Ball Head features a remarkable maximum height of 61.7 quot from a tripod with a folded length of only 12 quot making it an excellent choice for backpackers and other travelers who need a lightweight (3.6 lb.) and compact yet highly functional camera support. The design is made possible by a combination of a two section center column and six section legs that retract seamlessly and fold back 180 deg upward towards the QHD-63D Ball Head and align precisely beneath the camera base.

The Benro LBA2 Leveling Base is ideal for creating stitched panoramic images that require a level base for your pan head or ball head. It has a load capacity of 110 lb and can tilt + -15 deg

With this small Ball Socket Head Novoflex offers a small extremely firm ball head. Features a removeable flash shoe mounted on a screw and a panorama panning base.

Multi-purpose micro tripoad 1/4" ball heads　　 what's included: 1 Ball head with male & female threads 1 Metal flash shoe mount with male thread and metal lock washer Made of aluminum and brass Height with shoe: 5.7cm (2.2") Height without shoe: 4.7cm (1.85") Diameter of base: 2.4cm (0.95") Max load: 1.3kg (3 lbs) Weight with shoe: 70g (2.5oz) Weight without shoe: 60g (2.1oz) (Please note pictured are 2 pcs, this listing is for 1 pcs only) hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback Octroi if applicable

GoPro Suction Cup for Car use. 7CM Diameter Base, for GoPro Hero DESCRIPTION:- Features:- Directly connects with GoPro camera Material: Plastic Arm is adjustable   Ball rolling offers 360 degree adjustment of camera view Compatiable with Gopro triod mount Package included: 1 x GoPro Suction Cup for Car use PAYMENT POLICY Only Paisapay (using Credit Cards, Debit Cards, Net-banking). Paisapay is safest mode of making payments.   SHIPPING POLICY We offer Free Shipping across India. We normally ships using BLUEDART, FEDEX. Same day shipping on all orders before 4 P.M. RETURN POLICY The item must be returned

Neewer 360 Degree Swivel Mini Tripod Ball Head with 1/4"Screw Thread Base for DSLR Camera Camcorder Features: Attachment (top): 1/4" male thread Attachment (bottom): 1/4" female thread Specification: Material: Aluminium Alloy Color: Black Weight: 1.74oz Level: 360 degree Crossrange: +90 to -90 degree IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

The CT- Carbon Fiber Tripod with BE-108T Ball Head from Oben is a sturdy yet lightweight tripod with 5-section legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 15.5 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 8.8 lb the tripod and head ensure a stable base for many DSLR body lens combinations..With the five leg sections and the center column extended the maximum height of the tripod with the head is 60.8 quot. The legs are non-rotating which enables single-handed operation of the rubber twist locks on each leg: One twist of the wrist and the four leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain.

The CT- Carbon Fiber Tripod with BE-113T Ball Head from Oben is a sturdy yet lightweight tripod with 5-section legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 16 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 13.2 lb the tripod and head ensure a stable base for many DSLR body lens combinations..With the five leg sections and the center column extended the maximum height of the tripod with the head is 62.4 quot. The legs are non-rotating which enables single-handed operation of the rubber twist locks on each leg: One twist of the wrist and the four leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain.

The CT- Carbon Fiber Tripod with BE-126T Ball Head from Oben is a sturdy yet lightweight tripod with 4-section legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 18.9 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 26.4 lb the tripod and head ensure a stable base for many DSLR body lens combinations..With the four leg sections and the center column extended the maximum height of the tripod with the head is 68 quot. The legs are non-rotating which enables single-handed operation of all three rubber twist locks on each leg: One twist of the wrist and the three leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be twisted to reveal retractable metal spikes allowing you to shoot both indoors and outdoors on any terrain.

The AT- Aluminum Tripod with BA-106T Ball Head from Oben is a sturdy yet lightweight tripod with legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 16.8 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 6.6 lb the tripod and head ensure a stable base for many DSLR body lens combinations. With the four leg sections and the center column extended the maximum height of the tripod with the head is 59.0 quot. The legs are non-rotating which enables single-handed operation of all three rubber twist locks on each leg: One twist of the wrist and the three leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain. To shoot

The CT- Carbon Fiber Tripod with BE-117T Ball Head from Oben is a sturdy yet lightweight tripod with 5-section legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 16.8 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 17.6 lb the tripod and head ensure a stable base for many DSLR body lens combinations..With the five leg sections and the center column extended the maximum height of the tripod with the head is 64.3 quot. The legs are non-rotating which enables single-handed operation of the rubber twist locks on each leg: One twist of the wrist and the four leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain.

The CT- Carbon Fiber Tripod with BE-113T Ball Head from Oben is a sturdy yet lightweight tripod with legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 17.1 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 13.2 lb the full-sized tripod and head ensure a stable base for most DSLR body lens combinations..With the four leg sections and the center column extended the maximum height of the tripod with the head is 61.3 quot. The legs are non-rotating which enables single-handed operation of all three rubber twist locks on each leg: One twist of the wrist and the three leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain.

The CT- Carbon Fiber Tripod with BE-106T Ball Head from Oben is a sturdy yet lightweight tripod with 5-section legs that fold upward 180 deg to create an extremely compact package for transport ndash with the included head attached folded length is only 14.8 quot. For further versatility one of the legs unscrews from the chassis and attaches to the head amp center column to form a working-height monopod. With a system load capacity of 6.6 lb the tripod and head ensure a stable base for many DSLR body lens combinations..With the five leg sections and the center column extended the maximum height of the tripod with the head is 56.4 quot. The legs are non-rotating which enables single-handed operation of the rubber twist locks on each leg: One twist of the wrist and the four leg stages descend. Each leg is independently adjustable and they can be locked securely at three different angles. The tripod s feet feature rubber tips that can be removed to reveal metal spikes allowing you to shoot both indoors and outdoors on any terrain.