Bit microcontrollers mcu

Package includes: 1 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

Package includes: 1 x Atmega8l-8PU + Free 28 Pin base(socket) Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

Package includes: 10 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

MICROCHIP  PIC24HJ128GP202-I/SO  MICROCONTROLLER MCU, 16 BIT Product Information: Controller Family/Series: PIC24HJ Embedded Interface Type:   I2C, SPI, UART MCU Case Style:             SOIC No. of I/O's:              2 1 No. of Pins:                28 Program Flash Memory:      128KB R AM Memory Size:          8 KB Timers:                   Five 16 bit        UART:                     2         SPI:                       2          External Interrupts:      3          RTCC:                     1          I2C:                      1          CRC Generator:            1         ADC (Channels):           10          Remappable Peripheral For more detail visit microchip website. Shipping: - Shipping is all over India. Please Provide Complete Address and phone number. - We usually ship within same business day except Sunday or public holiday's. In case of any claim or complaints please contact us before leaving any negative feedback. And we will try our best to resolve your issue For Any Queries Please Call us on: + or you can e-mail us at

Description         1, on-board chip TLC, TLC is a serial interface DAC, its output is voltage type, the maximum output voltage is twice the value of the reference voltage, with a power-on reset function, performance than earlier current-output DAC is better, only need three serial bus can be completed 10 serial data input, easy and industry standard microprocessor or microcontroller (MCU) Interface                       2, on-board voltage reference chip TL431 can also be an external reference voltage                       3, the chip has drawn all of the pins can be controlled by the microcontroller operation                       4, Working voltage: 5V                     5, board size: 37.2 (mm) x16.9 (mm) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

RF TRANSMITTER &  RECEIVER  433MHZ WITH ENCODER AND DECODER BOARDS About • Ready to use with 8 bit Microcontrollers • Input power supply- 5v • 4 data lines connected to Burgstick • Test switch on each Data bit • Output LED's on each Data bit • Frequency 433Mhz. Inclusions  1 X  RF TRANSMITTER & RECEIVER 433MHZ WITH ENCODER AND DECODER BOARDS Shipping We ship as soon as possible once we receive the paisapay order. shipping may take 2-4 days. Shipping partners -  FedEx, DTDC, Blue Dart, Speedpost  and Delhivery. We also have all types of  Sensors, Display, Camera, Jack/Connector, Wireless Machines and tools, Power Supply, Arduino, controller board, Motors, IC, Electro Component, misc. VERO Boards, Chassis, Wires, General & Components. If you want any product under these categories we will be happy to list them for you. Pls visit our store http://stores..in/Robocraze-In For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else  please feel free to send a P.M or a mail to  .  Will reply A.S.A.P.  Call Us At:   +91 HAPPY SHOPPING:D Thank you. : D

RF TRANSMITTER &  RECEIVER  433MHZ WITH ENCODER AND DECODER BOARDS About • Ready to use with 8 bit Microcontrollers • Input power supply- 5v • 4 data lines connected to Burgstick • Test switch on each Data bit • Output LED's on each Data bit • Frequency 433Mhz. Inclusions  1 X  RF TRANSMITTER & RECEIVER 433MHZ WITH ENCODER AND DECODER BOARDS Shipping We ship as soon as possible once we receive the paisapay order. shipping may take 2-4 days. Shipping partners -  FedEx, DTDC, Blue Dart, Speedpost  and Delhivery. We also have all types of  Sensors, Display, Camera, Jack/Connector, Wireless Machines and tools, Power Supply, Arduino, controller board, Motors, IC, Electro Component, misc. VERO Boards, Chassis, Wires, General & Components. If you want any product under these categories we will be happy to list them for you. Pls visit our store http://stores..in/Robocraze-In For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else  please feel free to send a P.M or a mail to  info@robocraze.com.  Will reply A.S.A.P.  Call Us At:   +91 8123057137 HAPPY SHOPPING:D Thank you. : D

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Starter_AVR USB is introductory board for the AVR family of microcontrollers. The board has  Atmega32 MCU with UART bootloader,  hence no external programmer is required. Bootloader occupies approximates 2K Bytes of flash memory, remaining 30K Bytes can be used for user programming. Features Atmega32 MCU 32K bytes of In-System Self Programmable Flash Memory 1024 bytes EEPROM 2K bytes Internal SRAM 32 IO pins UART, SPI, JTAG and I2C support. Real Time Counter with Separate Oscillator Four PWM Channels**8-channel, 10-bit ADC 8 Single-ended Channels 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x USB Interface CP2102: for communicating with the host computer. LCD Interface: 16 characters, 2 lines Test Leds (2) and Switches(2) 5X2 ISP Programmer Connector Breakout for all Ports Breakout for +5v,Gnd and Vin Power Supply compatible with AC/DC adapters(9 to 12V DC, 1A). Physical Features Dimensions: 70mm X 90mm 1.6mm Glass Epoxy, FR4 PCB Wave Soldered. Downloads: Schematic Sample Code For more details, technical support and downloads visit the product page.

Mobile Controlled Robot Using DTMF Decoder Module: Robosoft Labs DTMF Decoder   Decodes DTMF audio signal to 4 bit binary TTL level output with LED indication. Suitable for use with microcontroller applications. Features   ·  Decodes DTMF as 4 bit binary ·  TTL level output for direct connection to microcontrollers ·  Low power 5V DC operation ·  LED indication of outputs ·  Simple to use ·  Based on excellent IC Applications ·  Remote Control systems ·  Caller ID applications ·  FM receiver based remote control ·  Remote control using Mobile phone Specification   Operating Voltage 5 V DC Regulated power supply input Operating Current 100 mA Information Connect regulated +5V DC supply for operation of board. Outputs Q1-4 and VT are active high output at 5V level. If any LED is on means that output is at high level. VT LED blinks once a new DTMF tone is received. The binary data appears at Q1 to Q4. Details of this output is on next page.Input signal can be from an audio source like microphone amplifier, FM radio receiver, wired phone line. Please note when connecting land line phone signal, do not connect ground wire of board to phone line directly. Use a 100nF capacitor

Description Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. This is HC-05 module, you can configure it to use it as master or slave mode by AT-commands. Level logic: TTL level: normal data represented using binary fixed +5 V equivalent to logic "1", 0V is equivalent to logic "0", referred to as a TTL signal system is the positive logic Package Content: 1 x HC-05, master-slave Bluetooth Module (Arduino compatible) 1 x AT commands Manual (by email) Voltage Requirement: Maximum Voltage 5V, can be used directly with any 5V microcontrollers.

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Package Contents   1 x PIC development Board with Free USB cable and CD containing software examples.   External Power supply NOT Included.    Contact Details   Have any Queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"    The PIC development board is a microcontroller board based on the PIC16F877. It has 33 input/output pins and two PWM outputs, 8 (10 bit) analog inputs, a works upto 20 MHz speed. A USB connection is available for programming and UART (communication with the PC), an external power jack is provided for high current motor applications etc. A Reset button is present. A 4 x 4 key matrix is provided for keyscan applications. A 16 x 2 LCD with programmable backlight is provided. A Piezo Buzzer is present. A 4 digit 7 segment common cathode display is populated for display multiplexing example. A onboard potentiometer is provided on one analog channel. A coin cell battery backed DS (RTC) is present on one of the I2C channel. An optional SPI external EEPROM (not provided with the board) can be mounted by the user for SPI memory. A ULN based stepper motor interface is present.   The Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. FEATURES AND USAGE The maximum length and width of the Board is approx 7 inch by 5.5 inches. Four PCB studs allow the board to be attached to a surface or act like a support stand. All the ports of the microcontroller are available as edge connectors on the right side of the board on a standard 100 mil spacing. The board can also take most of the 40 Pin DIP PIC18 series microcontrollers. An External programmer may be needed

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

TL 866 UNIVERSAL PROGRAMMER USB MiniPro TL866CS Universal BIOS Programmer EPROM FLASH AVR GAL PIC support more than chips ！！！ Please click the following link to upgrade the latest software and firmware: (V5.8 latest version can support WIN7 64 Bit system) （ will be frequently updated ） down.autoelectric.cn:/minipro/minipro_setup.rar Supported Device List ： www.autoelectric.cn/minipro/MiniProSupportList.txt Performance ： Well-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code ， runs faster, supports bilingual(English and Chinese), it can automatically identify the operating system to install and run under WIN /WIN XP/WIN /WIN /WIN VISTA/WIN7. Note: The following performance list ★ The great part of other development programmers are not comparable to its functions ， that is not easy to reach. ★ High Speed Programming ： This programmer has Built-in MCU with high-performance and high-capacity USB interface ， at the communication speed of 12Mbps ， being