Bluetooth module serial

The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC modules. These modems work as a serial (RX / TX) pipe. Any serial stream from to bps can be passed seamlessly from your computer to your target. DESCRIPTION The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC modules. These modems work as a serial (RX / TX) pipe. Any serial stream from to bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3 V up to 6 V for easy battery attachment. All signal pins on the remote unit are 3 V 6 V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires. And now, we provide HC-, HC- could be setting to Master or Slave by user. HC-06 just is Master or Slave that could be customized. This module default is HC-06 with Slave mode. Note: Be paired must Master devices and Slave devices each other. Master and Master devices, Slave and Slave devices can't pair each other. The HC - 06 (just supply slave mode and more easy) Slave mode could paired with PDA, PC etc. Specifications: -- Bluetooth protocol: Bluetooth Specification v2.0 + EDR -- Frequency: 2.4 GHz ISM band -- Modulation: GFSK (Gaussian Frequency Shift Keying) -- Emission power: ? 4 dBm, Class 2 -- Sensitivity: ? - 84 dBm at 0.1 % BER -- Speed: Asynchronous: 2.1 Mbps (Max) / 160 kbps, Synchronous: 1Mbps / 1Mbps -- Security: Authentication and encryption -- Profiles: Bluetooth serial port -- Power supply: + 3.3 VDC 50 mA We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. This is HC-05 module, you can configure it to use it as master or slave mode by AT-commands. Level logic: TTL level: normal data represented using binary fixed +5 V equivalent to logic "1", 0V is equivalent to logic "0", referred to as a TTL signal system is the positive logic Package Content: 1 x HC-05, master-slave Bluetooth Module (Arduino compatible) 1 x AT commands Manual (by email) Voltage Requirement: Maximum Voltage 5V, can be used directly with any 5V microcontrollers.

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Description Mini RS232 To TTL MAX Converter Adaptor Module Serial Port Board Brand new and high quality. A converter board for electrical levels The highest baud rate: not recommended More than 120 KBPS Technical parameters: Voltage range: 3 v to 5 v Size: 9.4 mm*15.9 mm   Package Contents: 1 x Mini RS232 To TTL MAX Converter Adaptor Module Serial Port Board Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

This is spare parts for making voice control car is fully in working condition. 1. Arduino Uno board 2. HC-05 Bluetooth module 3. L298 2A dual motor driver 4. Bo-motor 100 rpm (x4) 4 pieces 5. Wheel (x4) 4 pieces Price for combo = 1100 Rs/- (negotiable) Also you can buy it separately. Contact : Insta I'd - ( its_shanky_306) dm me

Description: Stop bringing your phone charger with you always - have this  Bluetooth Car Charger with FM Transmitter  instead. With this, you can charge your phone inside your car wherever you go!  Not only that, the  Bluetooth Car Charger with FM Transmitter  also lets you make or answer calls hands-free and lets you play music from your phone or USB disk through your own car speakers using FM transmission.  This is one cool car charger that you should have!  Adapting professional-grade high-performance bluetooth module,built-in mp3/wma decoder chip make it capable of playing the music files

Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee Arduino Description This shield V03 can achieve a simple two crunodal ZigBee network，achieve wireless communication between Arduino ，and allows the Arduino to wireless communicate over a modified ZigBee protocol using the popular XBee module.
It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Package Info 1Pc X Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee Arduino Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review please have a look. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard 24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

HLK-RM04 Serial Uart to Ethernet Switch WIFI Module with antenna and HLK-RM04 UART to WIFI  Module Test Base Board   Description Product features. 
 1). UART to WIFI Wireless Module ， UART to Ethernet Module ， Ethernet to WIFI Module ， UART server module ， Make your Serial Device connected to the Internet easily. Double Data Rate All transparently. Guarantee the highest limit of Usability and Compatibility. 
 2). The module integrated m adaptive Ethernet interface.The highest baud rate up to Kbps of the serial communication.and the highest rate of TTL serial port is 500KBPS. 
 3). Each module

See our ratings Add this shop to my favorites Serial TTL Controlled 4 Channel Relay Module: Control by ASR-M08-A Voice Board Module or Bluetooth ₹ Availability:

Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up AT commands §   Baud rate: (from v0.90, v0.80 and older: ) §   The AT part of the command can be written large or small, however, the following command must always be written large §   Make sure that before, after and within the command no spaces (space) occur General AT commands AT command Description Parameter Example AT Test command, are always "OK" back AT AT + RST Reset of the module, the module's boot messages followed by  ready  back AT + RST AT + GMR Querying the Firmware Version AT + GMR WiFi AT commands AT command Description Parameter Example AT + CWMODE =  Setting the WiFi mode  1) Station 1 =  2 = Access Point  3 = Both AT + CWMODE = 1 AT + CWMODE? Query WiFi mode AT + CWMODE? AT + CWMODE =? Query of possible settings for WiFi mode AT + CWMODE =? AT + CIPMUX = Using multiple connections 0 = single compound  1 = Multiple connections AT + CIPMUX = 1 AT + CIPMODE = Setting the data mode 0 = transparent  1 = Data AT + CIPMODE = 1 AT + CIPMODE? Output of the data set mode AT + CIPMODE? WiFi commands (Station / client) AT command Description Parameter Example AT + CWJAP =, Connecting to WiFi network ssid "SSID"  pass "password" AT + CWJAP = "makerday", "M4k3rd4y" AT + CWJAP? Output of the currently connected WiFi network AT + CWJAP? AT + CWLAP Output of available APs  2) AT + CWLAP AT + CWQAP Closes the connection to an access point AT + CWQAP AT + CIFSR Issue its own IP address AT + CIFSR WiFi commands (Access Point) AT command Description Parameter Example AT + CWSAP =, [,,] Set the access point parameters  3) ssid "SSID"  pass "password"  chan "channel"  enc "Encryption"  (0 = Open  1 = WEP  WPA_PSK 2 =  3 = WPA2_PSK  4 = WPA_WPA2_PSK) AT + CWSAP = "makerday", "M4k3rd4y" 5.3 AT + CWSAP? Output the current settings for the AP AT + CWSAP? AT + CWLIF Lists stations connected IPs 4) AT + CWLIF WiFi commands (IP Client) AT command Description Parameter Example AT + CIPSTATUS Output status of the IP connection (s) AT + CIPSTATUS AT + CIPSTART =,, Creating an IP connection with AT + CIPMUX = 0 type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND = Sending data over a single compound  5) len: Data length AT + CIPSEND = AT + CIPCLOSE Close a single TCP or UDP connection AT + CIPCLOSE AT + CIPSTART =,,, Creating an IP connection with AT + CIPMUX = 1 id: 0-4  type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND =, Send data via merhere compounds 6) id: 0-4  len: Data length AT + CIPSEND = AT + CIPCLOSE = Close one of several TCP or UDP connection id: 0-4 AT + CIPCLOSE = 1 WiFi commands (IP server) AT command Description Parameter Example AT + CIPSERVER = 1 [,] Starts the TCP server port: TCP port AT + CIPSERVER = AT + CIPSERVER = 0 Terminates the TCP server AT + CIPSERVER = 0 AT + CIPSTO = Sets timeout for TCP server timeout = s AT + CIPSTO = 180 AT + CIPSTO? Specifies timeout of TCP server AT + CIPSTO? If a TCP server is started, it can handle up to 5 simultaneous connections. Other compounds can be created, but only served when others are closed or terminated by timeout. The module incoming data directly with the prefix  + IPD  issued: + IPD,   OK   + IPD, 0.6: ON   OK The output is divided as follows: + IPD,,, It is  id  the ID of the compound (0-5),  len  the length of the resulting data packet and  data  contains the data received from the client. In the above example as first sends compound 1 the value   and then connect the string 0  ON     Powered by Turbo Lister