Brushless motor 30a

Brushless Motor kV + 30A ESC + 1 Pair Propeller Combo This combo kit consists of 1 x kV Brushless Motor + 1 x 30A ESC + 1 Pair of 10" propeller. The Motor, ESC and Propeller are selected to provide the best thrust, performance and flight time for your standard size quadcopter. Use our combo kit and remove all guess work from your multirotor project. The kit includes a brushless outrunner motor is specifically manufactured for quadcopters and multirotors. It is a kV motor. This is a high power motor with excellent efficiency. Use this to build powerful and efficient quadcopters. The included ESC is specifically made for quadcopters and multirotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. A set of 2 x Propellers are included

Brushless Motor kV + 30A ESC + 1 Pair Propeller Combo This combo kit consists of 4 x kV Brushless Motor, 4 x 30A ESC, 4 Pairs of 10" propeller. The Motor, ESC and Propeller are selected to provide the best thrust, performance and flight time for your standard size quadcopter. Use our combo kit and remove all guess work from your multirotor project. The kit includes 4 brushless outrunner motors is specifically manufactured for quadcopters and multirotors. They are kV motor. This is a high power motor with excellent efficiency. Use this to build powerful and efficient quadcopters. The included ESC is specifically made for quadcopters and multirotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. 4 pairs of Propellers are included

KV Micro Size Outrunner Brushless Motor Designed for Multicopter As of testing, full load of this motor demands between 6A - 8A current. So a >10A ESC is recommended, a 6A ESC might be too low if you need to drive it very hard.This is a great little motor suitable for multirotor helicopters size between mm. Description: Motor Diameter: Approx. 23.6mm Motor Shaft Diameter: 5mm Capable of 6-12~ amps of power draw Includes 1 spinner (5mm diameter) and 4 M2x5 phillips mounting screws Motor wire length = 40mm Which ESC is suitable for this motor? The testing (with 3S Li-Po, 10A ESC and both -Blade & 3-Blade Propeller) shows that this motor demands between A during full load (100% Throttle). So a 10A ESC is preferred to avoid overheat if you plan to drive this motor hard. The temperature of  10A ESC was only a little warm after a continuous full load after 5-6 minutes. 10A G Series SimonK (better option) 10A SS Series SimonK (economy option) A wholesales customer reported that the motors work beautifully which he used 4S mAh 25C with 12A ESC on Props. But we have not yet tried so it is not guaranteed but you are welcome to report. Why this motor has *R and without *R? When you run your Quadcopter, you need Two Clockwise and Two Anti-Clockwise motors. Without  *R   is the clockwise motor With  *R   is the counter-clockwise motor Washer Needed? Depends on the thickness of the frame which you will install this motor, you might need to use a washer with the screws because they might be too long if your frame is thin. So you need to check this carefully during the installation (to see whether the screw is too close to the motor wire inside. If yes, then you need to use a washer). The Washer needed is M2 Washer. Beside using washers, you may also consider to use shorter screws eg. 2*5 or 2*4 depends on the thickness of the frame. The thickness of the frame that this motor was originally designed for is 2.2mm. The screw is about 2*6 (Diameter is about 2mm and the total length is about 5.8mm). So

BLDC Motor KV.Built with high-end magnets, a high pole count and custom motor mount, this motor is designed purely for multi-rotor applications. This  includes an integrated prop adaptor for use with many different style props featuring a 4mm shaft and adaptor sleeves for 5mm/6mm props. It also has an in-built aluminum mount for quick and easy installation on your quadcopter frame. This is not a modified airplane outrunner. It was designed from the ground up specifically for multi-rotor applications. Specifications - Stator dia (mm) - 22 Stator length (mm) - 13 Stator arms - 12 Magnet Poles - 14 RPM (kv) - Idle Current (A) - Max Current (A) - 20 Max Power (w) - Biggest Thrust (g/s) - Rotor dia (mm) - 28 Shaft dia (mm) - 3.17 Motor length (mm) - 28 Overall Length (mm) - 42 Package Contents - 1x brushless motor 1x adapter for shaft 1x mount

This is the Velineon 380 Brushless Motor from Traxxas. FEATURES: Ultra high-temp sintered neodymium Traxxas 3.5mm bullet connectors 16-gauge Maxx Cable Optimized for 1 16 scale vehicles Efficient high speed ball bearings Precision-balanced rotor YOU WILL RECEIVE: One Velineon 380 Brushless Motor Two 3x5.75mm Cap Head Screws One Decal Sheet REQUIREMENTS: Installation

High Quality Brushless Motor   Specs. # of poles: 2 Max Amps: 7A Max Volt: 7.0V Max Watts: 49W Rpm/V: kv Resistance:  ohms No-load Current: 1.3A Dimension: 12mm x 22.0mm Mounting hole depth: 2.5mm Length of extend Shaft: 6mm Shaft diameter: 1.5mm Weight: 10.1g

This is the replacement Brushless Motor for the FlyZone Super Cub Select 2.4GHz EP RTF and Rx-R. FEATURES: Brushless Outrunner design with metal mounting plate Pre-installed bullet connectors.

T-MOTOR U-Power U7 KV490 is a high-performance brushless motor specifically designed for professional use on multi-rotor aircraft such as hexacopters and octocopters especially where high power is required and

GadgetsDeal Other Items Feedbacks About Us Contact Us Add To Favorites Emax XAKV Brushless motor + accessories

Very new, less than a week used. Suitable for upgrading phantom versions. Works best with 30A ESC and 10 x 4.5 prop.

This is the C Brushless kV Motor For the Flyzone Calypso Glider. FEATURES: Red and silver colored case.

The Cobra series motors have a 1 8 inch (3.17mm) shaft for extra strength as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.Included with every Cobra Series Motor is a complete accessory package which contains the following items: # Heavy Duty 3mm Thick Cross Style Motor Mount # Four M3x6mm Motor Mount Screws # Bolt-On style theaded prop adapter with 3 screws # Retaining Collar with Set Screw # Three female 3.5mm bullet connectors # Three pieces of heat-shrink tubingCobra C- Motor SpecificationsStator Diameter: 22.0 mm ( in)Stator Thickness: 13 mm ( in)Number of Stator Slots: 12Number of Magnet Poles: 14Motor Wind: 26 Turn DeltaMotor Kv Value: 950 RPM per VoltNo Load Current (Io): 0.45 Amps @ 8 VoltsMotor Resistance (Rm) per Phase: OhmsMotor Resistance (Rm) Phase to Phase: OhmsMaximum Continuous Current: 14 AmpsMax Continuous Power (3-cell Li-Po): 150 WattsMotor Weight: 61.0 grams (2.15 oz.)Outside Diameter: 27.7 mm ( in.)Shaft Diameter: 3.17 mm ( in.)Motor Body Length: 28.0 mm ( in.)Overall Shaft Length: 42.0 mm ( in.)Motor Timing: 5-10 degreesPWM Frequency: 8kHz

Grand Turbo Quad copter motor KV (1pcs) CCW High Transient Motor for Multi copters. 1. Motor for use

Reedy s return to the competition motor scene with the Sonic 540 was hugely successful on the track and showroom floor. Countless race wins at both the international and club level have proven the motor to be both powerful and reliable. Now thanks to racing team and customer input Reedy is proud to introduce the Sonic 540 Mach 2. Small modifications were made to the already competitive package to enhance performance reliability and user-friendliness. A new alloy end cap replaces the plastic version to prevent accidental timing movement and to provide better bearing alignment. Strategically placed vent holes are now slightly smaller to reduce the chance of debris entering the motor while still maintaining excellent airflow. Internal changes include new bearing sizes to increase maximum RPM and to improve reliability and silver-plated solder tabs reduce power-robbing resistance. The precision- balanced high-strength sintered rotor remains the same as

High quality Motor A well made and nicely finished  outrunner. Excellent for small foamies and indoor shockflyers. Spec. Weight: 39g Shaft: 3mm Motor Length: 46mm Diameter: 28mm Stator Size: 22x10mm Suggested prop: 9~10inch Voltage: 11.1v (3S) Kv: RPM/V Data; Prop size: 10x5 RPM: Max Curr: 15A Thrust: 840gm Prop size: 10x4.7 SF RPM: Max Curr: 16.5A Thrust: 850gm