Capacitive proximity sensor

See our ratings Add this shop to my favorites IR Infrared Obstacle Detection/ Proximity Sensor ₹ Availability:

4 way Channel Digital Capacitive Touch Sensor Switch Module TTP224 Description 1. working voltage: 2.4V-5.5V 2. 4 board-level status indicator 3. PCB board size: 35 (mm) x29 (mm) 4. TTP224 capacitive touch sensor IC 4 keys 5. the module can set the output mode, the key output mode, the maximum output time and fast / low power selection Package Includes: 1 X Touch Switch Module. *Remarks: Brand New item comes

Description 1. working voltage: 2.4V-5.5V 2. 4 board-level status indicator 3. PCB board size: 35 (mm) x29 (mm) 4. TTP224 capacitive touch sensor IC 4 keys 5. the module can set the output mode, the key output mode, the maximum output time and fast / low power selection SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

Input voltage-5V -TTL Compatible -Range-10 to 12 cm -Potentiometer for range adjustment -Can be used

Proximity Light Sensor Power Button Flex Cable Replacement for iPhone 4 4G        . Best quality,  Condition: 100% Brand New      . Compatible with APPLE IPHONE 4 4G PREMIUM QUALITY ITEM TO REPLACE YOUR BROKEN OR NOT WORKING Proximity Light Sensor Power Button Flex Cable FOR APPLE IPHONE 4 4G    “Buy With Confidence".   Description 100% Brand new and high quality Proximity Light Sensor Power Button Flex Cable Ribbon for iPhone 4 4G. Replacing your original Proximity Light Sensor Power Button Flex Cable. Replacement and make your phone like new. All flex cables have been tested before ship. Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.  Included: 1 x Proximity Light Sensor Flex Cable for iPhone 4 4G. SHIPPING:- All the item we are selling is available

Proximity Light Sensor  Power Button  Flex Cable Replacement for iPhone 4S        . Best quality,   Condition: 100% Brand New     . Compatible with APPLE IPHONE 4S PREMIUM QUALITY Proximity Light Sensor Power Button Flex Cable FOR APPLE   IPHONE 4S  “Buy With Confidence".   Description 100% Brand new and high quality Proximity Light Sensor Power Button Flex Cable Ribbon for iPhone 4S Replacing your original Proximity Light Sensor Power Button Flex Cable  Replacement and make your phone like new  All flex cables have been tested before ship. Color: Black Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.  Included 1 x Proximity Light Sensor Flex Cable for iPhone 4S SHIPPING:- All the item we are selling is available

DESCRIPTION Capacitive Digital Touch Sensor Hand Detection Module For Arduino Features: Touch key detection IC, providing a touch key. Touch detection IC is designed to replace traditional keys with variable area. Button keys and design. Low power consumption and wide operating voltage DC and AC touch key features. Specifications: Input operating voltage: DC 2.0V - 5.5V Input with reverse polarity protection. LED Color: BLUE, connected to Output pin Idle current: Size: 15.5 x 23.5 mm Connection: Vcc, Output, GND Package included: 1 x Hand detection module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description IR Infrared Obstacle, Proximity, Line following sensor module for Arduino, PIC by MatLogix Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output

The DHT22 (RHT03) is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old. Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! Features: Low cost 3 to 5V power and I/O 1-1.5mA measuring current uA standby current 2.5mA max current use during conversion (while requesting data) Good for % humidity readings with 2-5% accuracy Good for -40 to 80°C temperature readings ±0.5°C accuracy No more than 0.5 Hz sampling rate (once every 2 seconds) Body size 27mm x 59mm x 13.5mm (1.05″ x 2.32″ x pins, 0.1″ spacing   Feature & Application: High precision Capacitive type Full range temperature compensated Relative humidity and temperature measurement Calibrated digital signal Outstanding long-term stability Extra components not needed Long transmission distance, up to 100 meters Low power consumption 4 pins packaged and fully interchangeable Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

TTP226 8 Channel Digital Capacitive Switch Touch Sensor Module S3 for Arduino Description: Onboard TTP226 capacitive 8 keys touch sensor IC. Onboard 8 channel level status indicator. High precision mechanism design offers accurate operation. The module can set the output mode, the key output mode, the maximum output time and fast / low power selection Specification: POB Board Size: 55mm*46mm (2.16''x1.8'') L*W Operating Voltage: 2.4V~5.5V Working Power 2.4-5.5V Material Electronic Components, Plastic Net Weight 5g Package Contents: 1 x TTP226 8 Channel Digital Capacitive Switch Touch Sensor Module S3 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Digital Touch Sensor TTP223B capacitive touch switch module for Arduino Product Description   Specification: The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Features: Low power consumption Power supply for 2 ~ 5.5V DC Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation Package Contents: 1x  Digital Touch Sensor  TTP223B  capacitive touch switch module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Product Description 1x TTP-Channel Capacitive Touch PAD Sensor Switch Sensing Detector Module Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex The TTP229 is capacitive sensing design specifically for touch pad controls. The device built

Description The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Brand new and high quality. Low power consumption Power supply for 2 ~ 5.5V DC Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation Support WIN7 system Technical parameters: Power supply voltage VCC: V Output high VOH: 0.8VCC V Output low VOL:0.3VCC V Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V): 8mA Output pin pull-up current (@ VCC = 3V, VOH = 2.4V):4mA Response time (low power mode):220mS Response time (touch mode):60mS Size:24x24x7.2mm Weight:2g   Package Contents: 1 x Digital Touch Sensor capacitive touch switch module for Arduino Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

ITEM DESCRIPTION  Ultrasonic sensors are commonly used for a wide variety of noncontact presence, proximity, or distance measuring applications. These devices typically transmit a short burst of ultrasonic sound toward a target, which reflects the sound back to the sensor. The system then measures the time for the echo to return to the sensor and computes the distance to the target using the speed of sound