Ce years

Color:Green/Red/Yellow/Blue Size:51cm*23cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/10380PCS 40' Container:360ctns/21600PCS Min Order *Unit Price 5000PCS US $ 1.88 10000PCS US $ 1.80 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 8

S&A Water Chiller Distributor in US 2 Years Warranty Authentic S&A Water Chiller, Annual Sales Volume 60,000 Units https://www.teyuchiller.com/water-chiller-machines-cwf l-2000-for-cooling-2000w-fiber-lasers_p17.html Refrigeration compressor water chiller CWFL-2000 is specially designed for cooling 2000W fiber laser of fiber laser metal cutting machine. It is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A), a professional China-based chiller unit manufacturer with 16-year experience. Air cooled dual temperature water chiller CWFL-2000 is characterized by the cooling capacity of 6500W and the temperature control accuracy of 0.5. With dual temperature control system, air cooled dual temperature water chiller CWFL-2000 can cool the fiber laser device and the optics/QBH connector at the same time, which is space saving and cost saving. Refrigeration compressor water chiller CWFL-2000 has two temperature control modes as intelligent & constant temperature control mode. Under constant temperature control mode, the water temperature can be set as a fixed value as required. Under intelligent temperature control mode, the water temperature will be adjust itself according to the change of the ambient temperature, which greatly avoid the condensed water. Air cooled dual temperature water chiller CWFL-2000 has got the approval from CE, REACH, RoHS and ISO. It can be applied to cool fiber lasers of different brands, such as IPG, SPI, Trumpf, nLight and so on. Refrigeration compressor water chiller CWFL-2000 video: https://www.teyuchiller.com/temperature-controlled-re frigerating-chiller-cwfl-2000_n102 Specification: Voltage:220/380V; Frequency: 50/60Hz; Refrigerant: R-22 /R-410a Pump power: 0.75KW; Tank capacity:15L Max. lift: 53M/55M; Max. flow: 70L/min,83L/min N.W: 120Kgs; G.W: 155Kgs; Dimension:85*60*103cm (L X W X H); Packing dimension: 95*70*125cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 16 years of developing and producing industrial water chillers, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages: 1. With 11 patent certificates ISO, CE, RoHS and REACH compliant; Conforms to air transport requirements; 2 years warranty 2. 0.1 high precision temperature control, stable cooling performance, support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages: 1. Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Annual output 60,000 units, product exports rate above 60% 3. Standard bulk production, standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller. Guangzhou Teyu Electromechanical Co., Ltd. SKYPE: teyuchiller Email: marketing@teyu.com.cn Website: https://www.teyuchiller.com Tel: + 86-20-89301885 Fax: + 86-20-84309967

Water Chiller Manufacturer 16 Years Experience Wholesale water chiller, stable refrigeration performance,ISO, CE,RoSH,REACH approval https://www.teyuchiller.com/high-precision-uv-laser -water-chillers-cwul-05-with-long-life-cycle_p18.html High precision small portable chiller CWUL-05 has the temperature stability of 0.2 and it is specially designed for cooling 3W-5W UV laser of UV laser marking machine. It is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A), a professional China-based chiller unit manufacturer with 16-year experience. With temperature stability of 0.2, the water temperature fluctuation of closed loop industrial chiller CWUL-05 is pretty small, which can help maintain stable laser output of UV laser. High precision small portable chiller CWUL-05 is charged with refrigerant R-134a and it produces little noise when it is working, so it is an environmental friendly chiller. Besides, high precision small portable chiller CWUL-05 is equipped with intelligent temperature controller which offer two temperature control modes as constant & intelligent temperature control mode. Under constant temperature mode, users can set a fixed value manually according to their own need. However, under intelligent temperature mode, the water temperature will adjust itself according to the change of the room temperature (usually the water temperature is a few degree celsius lower than the room temperature), which offers great convenience for the users. For better cooling performance and prevent possible clogging, closed loop industrial chiller CWUL-05 is better added with purified water or clean distilled water. It is also suggested to clean the dust gauze and the condenser from time to time to reduce the potential of triggering high temperature alarm. Specification: Voltage:220V; Frequency: 50Hz; Refrigerant:R-410a Pump power: 0.05KW; Tank capacity:6L Max. lift:12M; Max. flow: 13L/min N.W: 23Kgs; G.W: 26Kgs; Dimension: 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 16 years of developing and producing industrial water chillers, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages: 1. With 11 patent certificates ISO, CE, RoHS and REACH compliant; Conforms to air transport requirements; 2 years warranty 2. 0.1 high precision temperature control, stable cooling performance, support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages: 1. Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Annual output 60,000 units, product exports rate above 60% 3. Standard bulk production, standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller. Guangzhou Teyu Electromechanical Co., Ltd. SKYPE: teyuchiller Email: marketing@teyu.com.cn Website: https://www.teyuchiller.com Tel: + 86-20-89301885 Fax: + 86-20-84309967

Specifications Lpg Gas Leak Detector Low battery and fault warning Green, Yellow, Red LED lights Connect with shut off valve CE, EN Features. CE, EN approved Gas Leak Detector/Alarm; 5 years lifetime, high accurate hot wire type sensor Detects Natural Gas, LPG, and Coal Gas etc. Combustible Gases Power Supply: 220V AC Power, Fault and Alarm Indictors: Power (Green), Alarm(Red), Fault (Yelow) 10% LEL sensitivity Simple installation, ceiling or wall mounted Sound and Flash Alarm, (85 decibel) Auto Test/reset button; Parameter. Power Supply 220V AC Static Current 40mA Warm-up Time 3-5 Minutes Humidity Range % Relative Humidity (RH) Working Temp. Range -10°c ~ +50 °c Sensitivity 10% LEL Alarm Reset Auto Reset after Gas Clears Sensor Hot Wire Type Sensor LED display Power, Fault and alarm indicators: Power: Green LED ON Alarm: Red LED Flashing Fault: Yellow LED Flashing Alarm Mode Sound & Flash Alarm; Usage Detecting LPG, Natural Gas and Coal Gas Relay Output Can be connected with solenoid valve

Key Features: * High Quality Image Sensor * 720 TVL High Resolution * 0.2 lux @ F1.2, 0 lux (IR ON) * 3.6 mm Lens * IR Range of 20 Mtr with 19 IR Leds * AGC, AWB and BLC * CE, FCC and RoHS Certified Specification: * Image Sensor: High Quality Image Sensor * Pixels: PAL:720H x 480V * Resolution: 720 TVL * Min. Illumination: 0.2 lux @F1.2, 0 lux (IR ON) * S/N Ratio: more than 47dB * Lens: 3.6 mm Lens * Gamma Correction: 0.45 * White Balance (AWB): Auto * Gain Control (AGC): Auto * Back Light Compensation: Auto * Day & Night (ICR): Auto * IR: IR Range of 20 Mtr.with 19 IR Leds * Sync: Internal Sync * Video Output: 1.0Vp-p/75ohm * Power Supply: DC 12V * Power Consumption: 170mA (mA) * IP Rating: IP66 * Dimensions: 169mm(L) x 80mm(H) x 70mm(W) * Weight: 265g * Operating Temperature: - * Certifications: CE, FCC, RoHs Warranty2 Years Manufacturer Warranty! VAT Bill Included. In The Box1 x CP Plus 720 TVL HQIS IR Bullet Night Vision CCTV Camera CP-LAC-TC72L2A 1 x VAT Bill.

Authentic water chiller CW3000 S&A manufacturer Buy CW 3000 Chillers directly from S&A, Competitive price,Fast Delivery,2 Years Warranty Get a Quotes Now! https://www.teyuchiller.com/air-cooled-water-chillers-c w-3000-9l-water-tank-110v-200v-50hz-60hz_p6.html Industrial water chiller CW-3000 is a heat-dissipating type water cooler instead of refrigeration type. It features the radiating capacity of 50W/ which means that when the water temperature increases 1, there will be 50W heat taken away from the equipment to be cooled. Therefore, it is very suitable for cooling equipment which has small heat load, such as CNC engraving and cutting machine spindle. Small water chiller CW-3000 is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A), a professional China-based chiller unit manufacturer with 16-year experience. With high standard product quality and strict laboratory test, S&A industrial water chillers have won over many users all over the world, including the North America, South America, Europe and Southeast Asia. Being the only type of heat-dissipating type water cooler, industrial water cooler CW-3000 becomes the ideal standard accessory for CNC machine users with its ease of use, long service life, low noise level and ease of moving. In terms of the circulating water of small water chiller CW-3000, it is recommended to use clean distilled water or purified water, for these two types of water can avoid the potential clogging inside the waterway, which helps extend the working life of the water chiller itself. Users can rest assured using industrial water cooler CW-3000, for there will be 2 years warranty on this chiller. CW-3000 industrial water cooler video: https://www.teyuchiller.com/small-water-chillers-cw-3 000_n107 Specification: Voltage: 110V/220V Frequency: 50/60Hz Tank Capacity: 9L Max.Pump Lift: 10M/70M Max.PumpFlow: 10L/min or 2L/min G.W: 12Kgs/14.5Kgs N.W: 9.5Kgs/12Kgs Dimension: 49*27*38(L*W*H) Package Dimension: 59*39*48(L*W*H) About S&A Brand S&A(TEYU) was founded in 2002. After 16 years of developing and producing industrial water chillers, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages: 1. With 11 patent certificates ISO, CE, RoHS and REACH compliant; Conforms to air transport requirements; 2 years warranty 2. 0.1 high precision temperature control, stable cooling performance, support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages: 1. Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Annual output 60,000 units, product exports rate above 60% 3. Standard bulk production, standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller. Guangzhou Teyu Electromechanical Co., Ltd. SKYPE: teyuchiller Email: marketing@teyu.com.cn Website: https://www.teyuchiller.com Tel: + 86-20-89301885 Fax: + 86-20-84309967

30W LED High Bay Lights (Reflector), Bridgelux LED 2550LM-2700LM, Mean Well UL Driver, 5 Years Warranty Starting at: $80.19 $64.19 SKU: DLGK30 Weight:4.0000kg Availability: In stock Features: 1. All adopt Bridgelux or Epistar LED chip. 2. Lumen efficiency of leds can be 115-125Lm/W. 3. Passed CE, RoHS, FCC certifications. 4. Five Years Warranty. 5. Emitting colors available: Warm White, White, Cool White. Application: Apply to Workshop, Gymnasium, Square, Advertisement, High building, Gardening and other similar places requiring lighting. flexible led strip http://www.dealightstore.com/led-lights/flexible-led-strip-lights.html led strip http://www.dealightstore.com/

Features: 1. All adopt Bridgelux or Epistar LED chip. 2. Lumen efficiency of leds can be 115-125Lm/W. 3. Passed CE, RoHS, FCC certifications. 4. Five Years Warranty. 5. Emitting colors available: Warm White, White, Cool White. Application: Apply to Workshop, Gymnasium, Square, Advertisement, High building, Gardening and other similar places requiring lighting. led strip light http://www.dealightstore.com/led-lights.html led strips http://www.dealightstore.com/

3W MR16 16 Color 80LM LED RGB Magic Light Bulb with Wireless Remote Control The durable LED light bulb is safe, effective and simple. The 3W LED light bulbs has long service life, and will result in money saved by lowered utility costs. With high quality, energy saving, high efficiency, long service life, the durable LED light bulbs is your best choice. The durable LED light bulb is great for landscape scene, spot lighting, architectural lighting, display scene, artwork lighting, mood lighting and so on. Order one for you now! Specifications: 1.Emitter type: LED 2.Shade type: PC white cover 3.Case material: Aluminum 4.Interface type: MR16 5.Input voltage: 85-265V 6.Power: 3W 7.Luminous flux: 80LM 8.Color temperature: 3000k 9.Life time: 50,000 hours 10.Dimension: 52x49mm 11.Color: RGB 16 Colors (White, Green, Blue, Red, Orange, Yellow, Purple) 12.Net Weight: 92g 13.Certification: CE & ROHS 14. Warranty: Three Years Warranty Featuers: 1.New and high quality 2.Very low heat generating, besides saving light power 3.Low consumption, high brightness 4.Energy-saving and environmentally friendly, is conducive to recycling 5.It comes with a remote control 6.It has flash, strobe,fade and smooth mode for ultimate party light control 7.This LED bulb can change 16 colors led strip light http://www.dealightstore.com/led-lights.html led tape http://www.dealightstore.com/

Specifications: Lux Rate: Min. Illumination 0.01 lux at the rate Of F1.2 S/N Ratio: more than 52dB Electronic Shutter: sec Lens: 3.6 mm Gamma Correction 0.45 White Balance: (AWB) Auto Gain Control: (AGC) Auto Back Light: Back Light Compensation Auto Day & Night (ICR) Yes Sync Type: Internal Power Supply: DC 12V Power Consumption: DC12V, 250mA Weight: 130g Dimensions 90mm x 70(H) Operating Temperature - C RH95% Max Certifications: CE, FCC, RoHs Installation and Warranty of CP-PLUS 720TVL 20MTR IR DOME CAMERA CP-LAC-DC72L2 Installation and Warranty: Warranty: 2 years Installation:

White Handheld Rechargerable Mosquito /Fly/Insect Racket for Domestic Use with 3LED Light and 3-Layer Net (OEM) Color:Green/Red/Yellow/Blue Size:51cm*21cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/10380PCS 40' Container:360ctns/21600PCS Min Order *Unit Price 5000PCS US $ 1.88 10000PCS US $ 1.80 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000

Color:Green/Red/Yellow/Blue Size:51.5cm*23cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/10680PCS 40' Container:360ctns/22192PCS Min Order *Unit Price 5000PCS US $ 1.80 10000PCS US $ 1.72 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '2'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 6

Color:Green/Red/Yellow/Blue Size:53cm*22cm Battery:500mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/9720PCS 40' Container:360ctns/20250PCS Min Order *Unit Price 5000PCS US $ 2.74 10000PCS US $ 2.66 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 5

Color:Green/Red/Yellow/Blue Size:53cm*22.5cm Battery:500mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/9720PCS 40' Container:360ctns/20250PCS Min Order *Unit Price 5000PCS US $ 2.74 10000PCS US $ 2.66 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 4

Color:Green/Red/Yellow/Blue Size:51cm*22cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round Min Order *Unit Price 5000PCS US $ 1.65 10000PCS US $ 1.60 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '0'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 2

Color:Green/Red/Yellow/Blue Size:51cm*22cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round Min Order *Unit Price 5000PCS US $ 1.72 10000PCS US $ 1.65 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '1'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 1

Color:Green/Red/Yellow/Blue Size:51cm*22cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round Min Order *Unit Price 5000PCS US $ 1.72 10000PCS US $ 1.65 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '1'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 3

Color:Green/Red/Yellow/Blue Size:51.5cm*21cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/10380PCS 40' Container:360ctns/21600PCS Min Order *Unit Price 5000PCS US $ 1.88 10000PCS US $ 1.80 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 7

For a quick response kindly contact us via email or Whatsapp directly, chat us online.. Whatsapp::: + Skype I.D::: shopwiselimited Gyroscope self balancing scooter dc balance electric stand up scooter big wheel balance scooter Item specifics Foldable: NO Net/gross weight: kg Power: W W Range Per Charge: KM km Tire Size: 19" Vacuum(Aluminum Alloy Rim) PB,36V,42Ah: 36V 42Ah Charging Time: 4-6H 4~6 hours Max power: w Max load: 130 kg Voltage: 36V Wheels: 2 Wheels Continuous workng time: 3~5 hours Certification: YES CE/FCC/Rohs Description Product Name: Gyroscope self balancing scooter DC Balance electric stand up scooter Big Wheel Balance Scooter Item Code: Category: Electric Scooters Add to Favorite Categories Short Description: Gyroscope self balancing scooter DC Balance electric stand up scooter Big Wheel Balance Scooter 1.Self balancing Electric Scooter 2.Personal transportor vehicle 3.Mobility electric chariot 4.Balancing vehicle 5.electric sooters Quantity: 1 Piece Package Size: (cm) Gross Weight/Package: 60.0 (kg) Feature: 1.Color is optional: Black,Red,White,Yellow,Green and Blue without extra cost 2.Front bag,bell and is Chargerport cover is standard accessory 3.Latest ergonomic silica gel handlebar with air guide ring, freshing and comfortable 4.Using big and reliable potentiometer, turning is more stable 5.Adopting latest torque spring turning mechanism, lighter and softer without abnormal sound. 6.Using Termal Circuit breaker,no need to replace fuse 7.Humanized drawing for the remote controller,fashion and clear. Speccification: Net Weight:55 kg Dimension:cm Max cruise speed:18km/h Max load:130 kg Max. Mileage (after full charging):35 km Max climb capability:30 degree Min turning radius:0 Charging time:4-5 h Battery:PB,36V,42Ah Power:brush DC Motor Voltage:100 v - 240 v Average Power: watts (w/pc) Lifetime of battery:1-3 years Tire: Tubeless Off-road Tire Wheel diameter:48CM Pedal Size:mm Standard Pressure:250 kpa Packing List: Item PCS Handle 1 pc Key 2 pcs Pedal Mat 2 pcs User Manual 1 pc Driving Handle 1 pc Fender 2 pcs Tire 2 pcs Battery Charger 1 pc Mystery Gift 1PC

Stainless Steel 4-Pc Cutlery Holder Set Stainless Steel 4-Pc Cutlery Holder   Product Description Strong and sturdy Thicker gauge for high durability Easy to wash and clean Rust proof and hygienic Color: Silver, Material: Stainless Steel Package Contents: 4-Pieces         Product Description Specifications CT-102 Powerful hair clippers sale price 1.Blade:T-10,high Carbon steel 2.Motor:100% cooper 3.CE/GS/BS/ROHS approved CT-102 Powerful hair clippers sale price Product Description •23 years producing experience in hair clipper • Advanced motor with quiet operate,won't hot for continual use • High Carbon Steel blade is low noise and long usage life •Easy maintenance and repair •15 kinds of countries plugs •Powerful torque for volume hair, low temperature • Tested and approved by professional hairdressers •Welcome OEM Blade T-10(High-carbon) steel Motor 100% cooper Power 10-12W Power cord 2.5m Voltage 110V/60HZ;220V/50HZ Accessories 4*attachment comb 1*barber comb 1*cleaning brush 1*oil 1*manual MONOPOLY SELLER ONLY IN INDIA     

More than 20 years experience,Website:http://www.totalflor.com, Topflor is a leading sports flooring manufacturer in China. Topflor offers a wide range of sports flooring solutions including sports halls, gyms and fitness areas. Certified by SGS, CE, LABOSPORT, BWF, ITTF, INTERTECK... Topflor sports flooring has been used in many international events including Olympic Games, World Championships, Asian Games, etc.

ATLANTIS is amongst India's leading manufacturers of water dispensers, Sanitizer Dispenser, hot beverage dispensing and vending machine. We have 25 years of  experience. All our products are made at our ISO certified facility and carry the CE mark of safety as per international quality standards. This dispenser is designed for Hand Sanitizer. A user is just required to bring her hands under the nozzle, and the machine through its infrared motion sensor, and  high-efficiency pump will dispense soap automatically in just 0.2 seconds. Price: 2,500.00 Net Weight:.35 Kgs Gross Weight:.6 Kgs Customer Care Number - 8588825888 Email: info@atlantisplus.com Contact us Address: B-32, Sector 5, Noida, Uttar Pradesh - 201301 India E:Mail - info@atlantisplus.com Mobile No. - 85888-25888 Fax No. - +91-120-2423661 Product visit: https://atlantisplus.com/atlantis-automatic-touchless-sanitizer-dispenser

ATLANTIS is amongst India's leading manufacturers of water dispensers, Sanitizer dispensers, hot beverage dispensing, and vending machines. We have 25 years of  experience. All our products are made at our ISO-certified facility and carry the CE mark of safety as per international quality standards. Atlantis prime hot, cold & normal floor-standing top loading water dispenser with cooling cabinet fridge provides 3 temperature of the water and has a cooling cabinet to  keep drinks or any supplement cold and is suitable for homes and small offices for 5-10 people. It has free shipping and one year warranty Price: Rs10,130.00 Net Weight: 16.9 Kgs Gross Weight: 19.5 Kgs Customer Care Number - 8588825888 Email: info@atlantisplus.com Contact us Address: B-32, Sector 5, Noida, Uttar Pradesh - 201301 India E:Mail - info@atlantisplus.com Mobile No. - 85888-25888 Fax No. - +91-120-2423661 Product visit: https://atlantisplus.com/atlantis-prime-hot-normal-cold-floor-standing-water-dispenser-with-cooling-cabinet