Cnc drive tools

cnc router yh- specifications: Items parameters working area (mm) x 600mm y 900mm z 100mm table structure table surface t-slot table lead rail system x,y,z linear round guide rails spindle power 2.2 kw rotating speed rpm cooling type water cooled origin china collect diameter mm drive systems xyz stepperControl System dsp build-in memorizer 128mb max travel speed 4 - 5.5m/min machine speed 2-3m/min precision.05mm work holding devices clamp plus vice holding working voltage ac 220v 50 hz. price is subjected to variation please confirm at the time of enquiry

cnc router yh specifications: working area (mm): x - 400mm,y - 400mm, z-100mm table surface: t slot table x,y,z: linear square guide rails power: 1.5 kw rotating speed: rpm cooling type: water cooled origin: china collect diameter: 3 / 4 / 6 mm drive systems: stepper control system: dsp build in memorizer: 128mb data reading mode: line by line compatible line formats: g code,*.u00,*.mmg,*.plt software compatibility: any cad/cam software working voltage: ac 220v 50 hz precision:.05mm maximum travel speed: 45.5m/min machine speed: 23m/min work holding devices: clamp price is subjected to variation please confirm at the time of enquiry

cnc router sh- items parameters working area (mm x y z200 table structure table surface t-slot table transmission systems x,y gear racks z ball screw lead rail system x,y,z linear square guide rails spindle power 3.0 kw rotating speed rpm cooling type water cooled origin china collect diameter mm drive systems xyz leadshine stepper control system dsp (usb)build-in memorizer 128mb data reading mode line by line compatible line formats g code,*.u00,*.mmg,*.plt software ucancam v9 working voltage ac 380v 50 hz machine width restricted to mm precision.05mm machine speed up to 25m/min work holding devices clamp interface type usb power not include the spindle w cutting thickness depends on materials price is subjected to variation please confirm at the time of enquiry

Description The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin.100" pitch header and accepts a standard, old-style CD-ROM audio connector cable. Brand new and high quality. The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.

CHURCHILL 302 Control: FANUC OTC Chuck Diameter: 400 mm Maximum Turning Diameter: 550 mm Maximum Turning Length: mm Swing Over Bed: 600 mm Spindle Speed: RPM Spindle Bore: 75 mm Accessories: Chip Conveyor Extra tools

CHURCHILL CTC 4 (TMC) Control: FANUC 6T Chuck Diameter: 380 mm Maximum Turning Diameter: 360 mm Maximum Turning Length: 900 mm Swing Over Bed: 600 mm Swing Over Cross Slide: 200 mm Spindle Speed: RPM Spindle Bore: 90 mm Accessories: Chip Conveyor Extra tools

Description The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin.100" pitch header and accepts a standard, old-style CD-ROM audio connector cable. Brand new and high quality. The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools. Technical parameters: size: 42 mm * 18 mm. Weight:5g   Package Contents: 1 x Optical endstop using TCST Photo-interrupter 1 x 4 pins cable Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

Specification: Working Area (mm) CNC Router YH Specifications Items Parameters X 300mm Y 400mm Z >80mm Table Structure Table Surface T-slot Table Transmission Systems Lead Rail System X,Y,Z Linear round guide rails X,Y Ball Screw Z Ball Screw Power 1.5KW Rotating Speed rpm/mm Cooling Type Water cooled Origin China Drive Systems XYZ Leadshine Stepper Control System DSP (USB) Build-in Memorizer 128MB Data Reading Mode line by line Compatible Line Formats G code,*.u00,*.mmg,*.plt Software Ucancam V9 Working Voltage AC220V/50Hz Table size 420x550mm Precision.05mm Interface type USB price is subjected to variation,please confirm at the tome of enquiry

As you can see in the pictures. Medium size CNC machine will be built for your needs. You can choose type of parts of you know. Or We will build standard one. controlling Cabinet ,PC ,Software,Programming,Frame,Motors,rails, drive system..etc with other parts and services Cost will be calculated as per your requirement

WFL MILLTURN 700S 7 AXIS Control: SIEMENS SINUMERIK 8 Chuck Diameter: 500 mm Maximum Turning Diameter: 550 mm Maximum Turning Length: mm Swing Over Bed: 200 mm Swing Over Cross Slide: 300 mm Spindle Speed: RPM Spindle Bore: 85 mm Accessories: Chip Conveyor Extra tools Coolant Tank Steady Rest

When producing turning parts, it is important to consider factors such as the material being used, the size and shape of the part, and the level of precision required. Different types of cutting tools can be used depending on the material being machined, such as high-speed steel or carbide. Additionally, different types of turning processes can be used depending on the complexity of the part, such as single-point turning or multi-axis turning. *Please tell us your requirements and demands, and send us your drawings or ideas,Specific prices and terms can be contacted by email or phone Website:www.asianstarcnc.com Email: ascnc@asianstarcnc.com

technical specifications: parameters working area (mm) x y z200 table structure:table surface: t-slot table,transmission systems:x,y gear racks, z ball screw,lead rail system x,y,z linear square guide rails spindle: power 3.0 kw, rotating speed rpm cooling type water cooled origin china collect diameter mm drive systems xyz leadshine stepper control system dsp (usb) build-in memorizer 128mb data reading mode line by line compatible line formats g code,*.u00,*.mmg,*.plt software ucancam v9 working voltage ac 380v 50 hz table size mmxmm precision.05mm machine speed up to 35m/min work holding devices clamp interface type usb power not include the spindle w price is subjected to variation please confirm at the time of enquiry

    Other Items Feedbacks About Us Contact Us Add To Favorites   CNB353 - New Original L298N H-Bridge Motor Driver IC for DC,Stepper Motor Drive Make your own DC,Stepper motor Drive/CNC drive Circuit Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Mini Water Pump  Description Good quality and brand new The Mech endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools. Our product is based on the original design found HERE and is a improvement of Gen7 Endstop (OptoEndstop 2.1) Package Info 1pc X Endstop switch Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

SanDisk Cruzer Blade USB Flash Drive 8GB Sign up for my email newsletters by adding my Shop to your Favourites Shops Be sure to add me to your favourites list !Check out my other items ! CNC Classic Network and Computers