Controller ac

Visit rajivihaan shop on e-Bay for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 5Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 60W, but preferably  50W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at for any additional information, or visit www.rajivihaan.com      

Visit rajivihaan shop on e-Bay for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at for any additional information, or visit www.rajivihaan.com  

Visit rajivihaan shop on e-Bay for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at for any additional information, or visit www.rajivihaan.com  

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit www.gaonsegaon.com RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit www.gaonsegaon.com  

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan  for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below Please contact us at    or visit our website for more details:  www.gaonsegaon.com -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at  for any additional information, or visit www.gaonsegaon.com/ecommerce     RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 5Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 60W, but preferably  50W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at  for any additional information, or visit www.gaonsegaon.com/ecommerce      

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan  for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit www.gaonsegaon.com/ecommerce   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit www.gaonsegaon.com/ecommerce    

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions     Contact us at for any additional information, or visit www.goansegaon.com/ecommerce   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 40Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 480W, but preferably  400W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. Contact us at for any additional information, or visit www.goansegaon.com/ecommerce        

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. IF U GOT ANY PROBLEM PLEASE CALL TO THIS NUMBER ,  BEFORE CONTACTING , WE CAN SOLVE THE PROBLEM..:)

We welcome you to be our client from the root of our heart. K.R.D Enterprises has come a long way since its inception in . We have sculpted a very eminent place for ourselves among the leading Manufacturers and Wholesale Suppliers of industrial Automatic Pump Controllers, Liquid Level Indicators, Tank Overflow Alarm etc. K.R.D Enterprises is proud of its glorious history of more than 11 years during which it has created several milestones in its path of progress. Keeping in view the ever growing expectations and requirements of our esteemed clients, we are fully dedicated for continuous improvement of quality and performance of our products. The vast range of our customized products includes Automatic Pump Controller, Liquid Level Indicators, Tank Overflow Alarm etc. Apart from our involvement in continuous up gradation of quality and performance of our products we also emphasize on their environmental friendliness. We invite you to come forward and join hands with us to build a mutually beneficial relationship. Year of Establishment: Primary Business Type: Manufacturer & Wholesaler   Our Products We are Specialized Manufacturers and Suppliers of Automatic Pump Controller, Liquid Level Indicators, Tank Overflow Alarm etc.Our direct focus is on enhancing our customers delight and morale by providing them high-quality products. Our success stems from the fact that we have a viable infrastructure, expertise and careful technical staff and vast network of business associates. We pass our products through stringent quality checks before delivering them to our respected clients. We Deliver a wide range of products used in various business houses like Manufacturing Units, Hospitals, Hotels, Recreation Centers, Dairy and Sweet Marts, Religious & Worshipping Places, Textile Processing Units, Horticulture & Agriculture Units. We offer our superior quality products in a wide array of options as well as, which are specially designed & manufactured to suit our client's requirements. Our unceasing investment in the up-gradation of product quality and performance has helped us to stay competitive in today's economy. We have succeeded in expanding our distribution network and client base by providing high on performance products at very competitive prices. The comprehensive line of our value-priced products encompasses of: - Automatic Pump Controller Liquid Level Indicators Tank Overflow Alarm Research and Development We regularly undertake R&D for improving our facilities as well as services. Our dedicated R & D team keeps in touch with their counterpart research communities in both domestic & international market. We constantly occupy ourselves in adding latest improvements in features like 'advanced technology', into our existing configurations, to provide complete satisfaction to our esteemed clients. We 'K.R.D Enterprises', provide total satisfaction to our esteemed clients, by providing them superior quality packaging solution. We make use of superior quality packaging materials, which ensures that our products are delivered with no faults & defects. Our company is also associated with reputed C&F agents, which ensures timely delivery of all consignments at desired locations. With a mission to introduce & bring awareness about the role of conserving water & hygiene in maintaining good health & cheerful living. We-‘K.R.D. Enterprises’, work with dedication, honesty, sincerity and creatively. Product Details Liquid Level Control Systems are used for monitoring of Liquid Levels in Tanks, Reservoirs, Silos, and Dams, in Process Liquid Level Monitoring etc. The system provides Visual multi level as well as continuous Level Indication we can also provide Audio Visual Alarms at desired levels and Automatic Control of Pumps based on users requirements. The liquid may be Acidic, Alkaline, Oil, Water, Effluent, or Petroleum based, in moving, turbulent or static state. The indication system is well suited for any size or depth of tank, and can give resolution in desired number of steps. It can be used in any location and is safety designed. The system is very versatile, a number of tailor made variations like control of multiple tanks, or multiple pumps are possible. Principle The operation is based on magnetic sensing of levels. A float rides on a SS Pipe Probe in which Level Sensors are enclosed and sealed. Float moves with the rise and fall of liquid level and actuates the sensors magnetically. The signals from the sensors are received by the Main Control Unit (which can be placed at the floor of your choice). This unit indicates Liquid Levels and can also provides necessary outputs of Alarm. Specifications Power Supply Input220 V AC Internal Voltage12 V DC Sensing SystemsMagnetic Level Sensing OUTPUTS  DisplayL. E. D. in desired number of stages (Standard Unit has 5 levels at 20% intervals) AlarmAudio with Acknowledge facility Display UnitL.E.D ResolutionMinimum 60 mm Signaling DistanceUp to 300 meters (For more please specify) Power Consumption0.25 watts Automatic Pump Controller ____________________________________________________________________________ The Automatic Pump Controller is a device that is mounted on the tank top. The device does not suspend any current into water hence is very safe. The float riding on a metallic rod is suspended into water and is free for Up/Down  movement. The float rides on a metallic rod hence on reaching the lower end of rod it triggers signal to main control unit to start the pumping system. Now on the other hand when the float reaches the top level of rod it triggers a signal for the main control unit to Off the pumping system. The device is fool proof as it works with the water level movement and does not depend on electronic probes for signal at all. Specifications Power Supply Input220 V AC Internal Voltage12 V DC Sensing SystemsMagnetic Level Sensing OUTPUTS  Display Single L.E.DL.E. D. On when pump is running. L.E.D. Off when pump stops..

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.rajivihaan.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay  http://stores..in/rajivihaan   for other Solar, DC, or AC-DC Energy Efficient Products and Solutions. Click here for rajivihaan shop http://stores..in/rajivihaan Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 5Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 60W, but preferably  50W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay  http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 40Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 480W, but preferably  400W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce    

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce

Visit Rajivihaan shop on e-Bay  http://stores..in/rajivihaan   for other Solar, DC, or AC-DC Energy Efficient Products and Solutions. Click here for rajivihaan shop http://stores..in/rajivihaan Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 5Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 60W, but preferably  50W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com/ecommerce  

Visit Rajivihaan shop on e-Bay  http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 40Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 480W, but preferably  400W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce  

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.

Aquagrand Plus Water Purifier RO+UV+UF+TDS Controller FEATURES DOUBLE PURIFICATION BY RO + UV + UF WITH TDS CONTROLLER FULLY AUTOMATIC OPERATION WITH AUTO-START AND AUTO-OFF BUILT-IN SMPS THAT SUPPORTS WIDE RANGE OF INPUT VOLTAGE (V AC) FOR HANDLING VOLTAGE FLUCTUATIONS HIGH POWER 11W UV LAMP FOR COMPLETE DEACTIVATION OF HARMFUL MICRO-ORGANISMS MINERAL CARTRIDGE TO ADD ESSENTIAL MINERAL AND ENHANCE TASTE OF WATER SUITABLE FOR WATER FROM ALL SOURCES SUCH AS BORE-WELLS, UNDER GROUND WATER TANKS, OVERHEAD STORAGE TANK OR MUNICIPAL TAP-WATER PUSH-FIT COMPONENTS FOR LEAK-PROOF PERFORMANCE WALL MOUNTED DESIGN, BEST SUITED FOR INDIAN HOUSING TO PREVENT TAMPERING PURIFIED WATER STORAGE CAPACITY OF 15 LITRES WITH WATER LEVEL INDICATOR SPECIFICATIONS SL. No. Parameter Specification 1 Purification capacity Upto 15 Litres per hour* 2 Max Duty Cycle 120 liters per Day 3 Storage Tank Capacity 15 Litres 4 Purification Stages 1)        Pre-Candle 2)        Antiscalant 3)        Sediment Cartridge 4)        Activated Carbon 5)        RO (Reverse Osmosis) 6)        UV System 7)        TDS Minimiser 8)        UF 9)   Mineral Cartridge  5 RO Membrane to 80 GPD 6 UV Lamp Power 11 Watt 7 Input Voltage V.  AC (Hz) 8 Operating Voltage 24V DC 9 Minimum Inlet  Water Pressure 0.3 kg/sq cm 10 Maximum Inlet water Pressure 2 kg/sq cm 11 Dimensions   (mm) L450 W260 H Net Weight 9 kgs.

पानी की मोटर को चलाये Automatic यह device छत पर रखे हुए टैंक में पानी को कभी खत्म नहीं होने देता टंकी में पानी खत्म होने से पहले ही Automatic मोटर ऑन हो जायेगी और जेसे ही टंकी में पानी पूरा भर जायेगा (overflow से पहले) मोटर खुद ही बंद हो जायेगी छत पर टैंक overflow होने के कारण मकान में आई सीलन से छुटकारा इसे आप manual ऑन या ऑफ भी कर सकते हैं Suitable For Any Type Of Water Pump & Water Sourse We Also Accept Repair Work Of Any Types Water Level Controller 1 Year Home Service Warranty Contect SVR SOLUTIONS thdc colony Dehrakhas Dehradun 9634421845 7055941786 Automatic Water Level Controller (AWLC) will automatically START the pump set as soon as the water level falls below the predetermined level (usually kept half or 2/3rd tank) and shall SWITCH OFF the pump set as soon as tank is full or water level in the lower tank is at below minimum level. AWLC provides you the flexibility to decide for yourself the water levels for operations of pump set in upper/lower tanks. Built in Indications for showing Full, Empty Levels in Upper Tank and Lower Tank Empty Indication. MANUAL operation switch for special operations like watering the plants from pump set. The AWLC ensure no overflows or dry running of pump there by saves electricity and water. Low AC Voltage sensing circuit to avoid polarization of electrodes in water (requires very rare cleaning of electrode ends). Provided with special stainless steel conductive electrodes. Consume very little energy, ideal for continuous operation. EASY INSTALLATION LOW MAINTENANCE COMPACT ELEGANT DESIGN FULLY AUTOMATIC SAVES WATER & ENERGY INCREASES PUMP SET LIFE. AVOID SEEPAGE OF ROOFS & WALLS DUE TO OVERFLOWING TANKS. IDEAL FOR DIFFICULT TO ACCESS OVERHEAD TANKS. Automatic Water Level Controller (AWLC) will automatically START the pump set as soon as the water level falls below the predetermined level. AWLC provides you the flexibility to decide for yourself the water levels for operations of pump set in upper/lower tanks.

Eurovigil AC Controller helps you to schedule power consumption for your air conditioner to reduce your electricity bills. To know more, visit https://www.eurovigil.in/ac-controller.html

Please note:  Priority of operation of this Solar inverter is Solar - Grid - Battery.  800VA 12V Solar Inverter with 30A MPPT Charge Controller:- These Solar Power Conditioning Units are a new generation of inverters, changing DC energy from solar modules into clean, stable AC power. These are designed for highest efficiency: Integrated advanced microprocessor technology combined with pure sine wave output makes them the perfect choice to use with high-end electronics and electrical equipment. It is a combination of high quality MOSFETs with MPPT-technology and Solar Prioritization as an additional feature offers you a device that is clearly ahead of its competitors. Features:- • Advanced microprocessor to optimize operation processes • LCD display • Inbuilt MPPT technology charge controller • Solar priorisation • High efficiency • Dual mode operation • Advanced Bi-directional SMPS charger • Pure sine wave output • Good voltage regulation • Over voltage / current protection Technical Specifications:- Kindly forward all your preliminary enquiries/questions about the product and any other doubts to  . You will receive a mail reply or call back at the earliest. Incase you have any query to be resolved for immediate order placement, please call us @   +.

Package Contains:   l. FULLY AUTOMATIC WATER LEVEL CONTROLLER WITH INDICATOR. 2.SIX SENSOR FOR UP AND DOWN BOTH TANK.   Item  specification:   1.Condition: New: A brand-new, unused and undamaged item that is fully operational and functions as intended.       2.Warranty: Seller Warranty 3.Warranty Service: Replacement                                 Fully automatic water level controller with indicator & sensor   Features: 1.Elegant Looks 2.No Man power Required To operate as Fully Automatic. 3.Avoid Overflow & Dry Running Longer Life No Mechanical System 4.Saves Electricity 5.Compact ABC (Virgin) Housing 6. Control Underground Tank To Overhead Tank Specifications:   1.Operating voltage volts AC. 2. Frequency 50 Hz. 3. Load capacity each switch (2 HP) Note: The above item is Brand New Original & comes

Please note:  Priority of operation of this Solar inverter is Solar - Grid - Battery.  450VA 12V Solar Inverter with 30A MPPT Charge Controller:- These Solar Power Conditioning Units are a new generation of inverters, changing DC energy from solar modules into clean, stable AC power. These are designed for highest efficiency: Integrated advanced microprocessor technology combined with pure sine wave output makes them the perfect choice to use with high-end electronics and electrical equipment. It is a combination of high quality MOSFETs with MPPT-technology and Solar Prioritization as an additional feature offers you a device that is clearly ahead of its competitors. Features:- • Advanced microprocessor to optimize operation processes • LCD display • Inbuilt MPPT technology charge controller • Solar priorisation • High efficiency • Dual mode operation • Advanced Bi-directional SMPS charger • Pure sine wave output • Good voltage regulation • Over voltage / current protection Technical Specifications:- Kindly forward all your preliminary enquiries/questions about the product and any other doubts to  . You will receive a mail reply or call back at the earliest. Incase you have any query to be resolved for immediate order placement, please call us @   +.

Technical Specifications:- Mains Input Nominal input 230V AC, 50 Hz Input Voltage cut off Computer mode V AC Normal mode V AC Input voltage higher cut off V AC Input connection 3 pin plug (15A) Output: Inverter Mode Output voltage (VAC) % Output power (VA) 500 Power factor 0.8 lag to unity Output frequency (Hz) Output voltage waveform Sine wave Output connection 3 pin outlet, 15 A Output: Mains Mode Same as input Other Specifications Efficiency 85% Transfer time 15 milliseconds LCD indication Status of UPS Audible alarm Battery low, Mode changeover Noise level Less than 50 dB Battery Voltage 12V Battery capacity – recommended (AH) 300 Typical Low Voltage Alarm Voltage (V) 11.0 Typical shut down battery voltage (V) 10.8 Charging current Constant current boost & trickle charging Dimension 297 (W) x 371 (D) x96 (H) mm Net weight 5.5 Kgs

Please note:  Priority of operation of this Solar inverter is Solar - Battery - Grid.  Technical Specifications:- Mains Input Nominal input 230V AC, 50 Hz Input Voltage cut off Computer mode V AC Normal mode V AC Input voltage higher cut off V AC Input connection 3 pin plug (15A) Output: Inverter Mode Output voltage (VAC) % Output power (VA) 500 Power factor 0.8 lag to unity Output frequency (Hz) Output voltage waveform Sine wave Output connection 3 pin outlet, 15 A Output: Mains Mode Same as input Other Specifications Efficiency 85% Transfer time 15 milliseconds LCD indication Status of UPS Audible alarm Battery low, Mode changeover Noise level Less than 50 dB Battery Voltage 12V Battery capacity – recommended (AH) 300 Typical Low Voltage Alarm Voltage (V) 11.0 Typical shut down battery voltage (V) 10.8 Charging current Constant current boost & trickle charging Dimension 297 (W) x 371 (D) x96 (H) mm Net weight 5.5 Kgs