Controller battery charging

TPA Li-ion lithium Battery Charging Module Charging Board Charger Charge your Li Ion Batteries via USB Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   To Charge your Li-ion battery, this device needs 5V mini USB power supply, and this will charge the battery directly. RED led Glows while charging BLUE Led glows when Full Product Description:   ·         Onboard the TP lithium charge management chip ·         Onboard MINI USB head can directly link computer USB port charging ·         The charging board can also be powered by pin (IN + and IN-) ·         Reserved the TEMP pin header, and can be used as a lithium battery temperature detection ·         PCB board size: 3.73 (cm) x1.5 (cm)/1.46''X0.59'' ·         Input voltage: 4V-8V maximum output charging current: mA   Package Include:   ·         1 x     TPA battery charging module Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

3A high-current lithium battery charging board four TP   Basic parameters:   5V input, 4.2V output; charging red, then turn green.   4 chips, with a reasonable turn-off voltage, the charging circuit for each chip set 750mA, total 3A.   Input connected two 5A Schottky diodes, 5V standard voltage input chip heat ideal (3.8V battery test).   Comes with over-temperature protection, short circuit protection. Use and Test Considerations:   1: The battery can not be reversed! (On-board has been marked B + B-)   2: Test current regulated power supply current can be seen, if only by connecting an ammeter

WINTRUST-INDIA WINTRUST-INDIA, CHENNAI. CUSTOMERs' PRIDE AND DELIGHT ARE OUR MOTTO WISHING YOU A HAPPY SHOPPING TRUSTED SAFETY SATISFACTION AND DELIGHTFUL EXPERIENCE ALL ITEMS I sell are new. If you find any item missing, it means No stock. Fresh stock will arrive and relisted soon. So visit again and again. With Warranty Anytime Anywhere 100% Satisfaction ! Brand New !! Manufacturer Warranty !!! 5V Lithium Battery Charging Board Micro USB 1A Charger Module PCB

Description "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">Micro USB 5V 1A 18650 Lithium Battery Charging Board Charger Protection Module Technical parameters: Power requirements: 3 to 6 VDC; 12 mA @ 3 V, 23 mA @ 5 V Communication: Single bit high/low output Dimensions: 1.41 x 1.0 x 0.8

Charger module with TP controller: This charger is a very small module for DIY people, it uses the TP controller and standard configuration is with 1A charge current. It does not include any power supply or tray.  The board needs a 5 volt power supply, this can either be from a mini usb connector or soldered directly to the board. it has a blue led for charging and a red led for done. The charge led will be on when charging and it will be flashing when no battery is connected. The done led will be on when charging is done or no battery is connected. The backside of the board has some internal connections and the connections points are also accessible here. The board is small, the battery is a AAA battery.   With the mounted resistor the charger can handle larger batteries, but changing the resistor makes it to possible to charge smaller batteries. Measurements Below 2.85 volt the charger will charge with about 80mA

USB 5V 1Amp Lithium Battery Charger Lowest Price Features  Charge module- Linear charging. Current- 1A adjustable. Charge precision- 1.5%. Input voltage- 4.5V-5.5V. Full charge voltage- 4.2V. Led indicator- red is charging blue is full charged. Input interface- mini USB. Work temperature- -10 to +85. Inversed polarity- NO. By Default Charging Current at maximum 1 Amp No need to change the program resistor:Package Includes: 1 X USB Lithium Battery Charger Module   For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on h battery, charger, battery charger, lithium, lithium battery, lithium battery charger, charger module, 5v USB Charger, TP, battery, charger, battery charger, lithium, lithium battery, lithium battery charger, charger module, 5v USB Charger, TP, battery, charger, battery charger, lithium, lithium battery, lithium battery charger, charger module, 5v USB Charger, TP, battery, charger, battery charger, lithium, lithium battery, lithium battery charger, charger module, 5v USB Charger, TP, 

Description: This module uses a USB 5V to charge a Lithium ion battery. With LED indication. This module use IC TP . The input is  Mini USB Module Specifications 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5%. 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging blue is full charged. 7. Input interface- mini USB. 8. Work temperature- -10℃ to +85℃. 9. Inversed polarity protection - NO. 10.Size- small to 25X19X10mm. a must for every DIY'er. charge any 3.7v battery, charges even mobile battries at excellent rate cheapest on .. hurry, limited stock..

Only Inverter Circuit Board is offered, You need your own transformer to make it work.  Product Description The product for sale is a 500 w inverter kit, It works on 12v battery, You need a good quality transformer to run this device. This circuit gives you a square wave output. The board comes with no warranty as if you do some mistake while wiring it up you might burn the board, We test the product before shipping it to your place.  You will need a transformer with    input and output. Below are the images of the product you will receive upon payment.

Battery chargers for sale. 12 volt 2.5, 5,6,10,15,20... amps, Assembled, Charge from 12 volt 4 Ah battery to 12 volt 250 Ah battery , with charging amper adjustable switch, digital and analog display with cooling fan.

Maxicom Charger AA/AAA Ni-CD or NI-MH Rechargable Batteries FEATURES OF CHARGER   Insert 2 Or 4 AA/AAA Connect The Charger To An Ac Outlet 220 V 50 HZ It can charge No. 5 (AA, UM3), No. 7 (AAA, UM4) & Charge max 4 Batteries same type at a time AA Battery Charging time: The same charging position uses one battery: 7-8 hours. The identical charging position uses two batteries: hours. AAA Battery Charging time: The same charging position uses one battery :.4-5 hours. The identical charging position uses two batteries: 8-10 hours. For Indoor Use Only Do Not Charge Non Rechargeble Batteries = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

FOR ANY QUERY PLS FEEL FREE TO CONTACT AT Overnight safe charging Battery charging status Two charging channels, can charge 2-4 pcs NiMH AA or AAA batteries 2 independent charging channels Charges 1  pair of AA/AAA Ni-MH batteries Low Charging current for longer battery life Since this unit uses a relatively low charging current the lifetime of your batteries is maximized. Environmentally Friendly 2 LED Indicators The red LEDS light up to indicate charging is

This product is a configurable solar battery charger for 4V, 6V and 12V lead acid batteries. It provides a charging current up to 3A. The charger offers a DC Jack for connecting Solar Panel on the input side and a battery charging cable with crocodile clip terminations on the output side. Solar Panel can charge batteries upto 10Ah rating (Charging Time: 8-10 hours). A three-way pre-settable switch allows you to configure the charger as per the battery ratings.This product offers thermal, short circuit and reverse input circuit protection. A red LED indication is available to show the presence of a valid charging source.The product is highly recommended for charging lead acid batteries used

The Apple iPod shuffle USB Cable connects your iPod shuffle (3rd and 4th generation) to your computer's USB port for syncing and battery charging and to the Apple USB Power Adapter for convenient charging from a wall socket. Two cables are included, both with a 3.5-mm jack on one end and a USB connector on the other. The shorter cable is the same length as the USB cable that comes with iPod shuffle. The longer cable is perfect for connecting iPod shuffle to the back of a desktop computer or to a power adapter plugged into a wall socket. Compatible with iPod shuffle (3rd and 4th generation). The Apple iPod shuffle USB Cable connects your iPod shuffle 5G 4G 3G  to your computer's USB port for syncing and battery charging and to the Apple USB Power Adapter for convenient charging from a wall outlet.   The cable has a 3.5-mm jack on one end and a USB connector on the other. It is the same as the USB cable that comes with iPod shuffle. Length: 45 mm or 4.5 cm We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue. Contact Us on  - +91                                    thank u.

The Apple iPod shuffle USB Cable connects your iPod shuffle (3rd and 4th generation) to your computer's USB port for syncing and battery charging and to the Apple USB Power Adapter for convenient charging from a wall socket. Two cables are included, both with a 3.5-mm jack on one end and a USB connector on the other. The shorter cable is the same length as the USB cable that comes with iPod shuffle. The longer cable is perfect for connecting iPod shuffle to the back of a desktop computer or to a power adapter plugged into a wall socket. Compatible with iPod shuffle (3rd and 4th generation). The Apple iPod shuffle USB Cable connects your iPod shuffle 5G 4G 3G  to your computer's USB port for syncing and battery charging and to the Apple USB Power Adapter for convenient charging from a wall outlet.   The cable has a 3.5-mm jack on one end and a USB connector on the other. It is the same as the USB cable that comes with iPod shuffle. Length: 45 mm or 4.5 cm We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue. Contact Us on  -                                    thank u.

OEM Apple Charging Cable USB Charger Sync Cable for Apple iPod Shuffle 3rd 4th 5th & 6th Gen Product Description This sync cable is an essential component to charge and transfer music to your iPod via iTunes software. Keep a spare handy, or have one at work and one at home for ultimate convenience. The Apple iPod shuffle USB Cable connects your iPod shuffle (3rd 4th 5th generation) to your computer’s USB port for syncing and battery charging and to the Apple USB Power Adapter for convenient charging from a wall outlet. The USB shuffle cable charger adapter allows you to connect a iPod Shuffle to any USB port without having to use the relatively large iPod Shuffle Dock (included with your iPod Shuffle).  Supporting full speed USB transfer rates, you will be amazed at how quickly it handles music transfer with iTunes and charging needs. The USB shuffle cable is the perfect travel companion, taking up virtually no space