Dc bench meter

MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9%  Power: 6F22 9V Battery (BATTERY INCLUDED) Item size: cm Item weight: 414g Package size: cm

DT87 DCV:600V               ¡À(0.5% + 1) ACV:450V               ¡À(1% + 4) ACA:20A-400 A           ¡À(2% + 5) OHM:2K                 ¡À(1% + 2) Continuity Buzzer:yes Data Hold:yes Diode Test:yes Power:1.5V(AAA)*2 Maximum Display: Display Size:mm Product Net Weight:145g Powered by Turbo Lister

we only accept Paisapay New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

Product Description Condition: Brand New. Input power: v Output power: 12V. Suitable for Led Strip  CCTV, Radio, Spy camera. Lower Power consumption, Lower Temperature, high efficiency Please compare this DC output Voltage, Current with your device before bidding and do not drive on high load like modem, big fan. If any device is taking more current then its capacity then adapter will become hot and can be burn on long use. 30 mm x25mm x 55mm Led strip up to 5 meter Have LED indicator but its under cover and can be customized according to need. Please look here my other listing for better quality adapter if using on high current and for continuous time http://www..in/itm/DC-12V-1-Amp-Adapter-SMPS-Based-in-best-quality-/?

Product Description Condition: Brand New. Input power: v Output power: 12V 1A. Suitable for Led Strip  CCTV, Radio, Spy camera. Lower Power consumption, Lower Temperature, high efficiency Please compare this DC output Voltage, Current with your device before bidding. 30 mm x25mm x 55mm Led strip up to 5 meter Quantity - 2 pcs Have LED indicator but its under cover and can be customized according to need. Please look here my other listing for better quality adapter if using on high current and for continuous time http://www..in/itm/DC-12V-1-Amp-Adapter-SMPS-Based-in-best-quality-/? Offer - 1 pc extra free on 2 order (2 order means 4 quantity and 1 extra free = total 5)

New Page 1 New Page 1 Digital Clamp Meter Reads Volts Amps, OHMS, ELECTRICAl USE DESCRIPTION:- Digital Clamp Meter Reads Volts Amps, OHMS, backlight. Data Hold, Resistance Contnuity buzzer. Specification ---- DC Voltage- Input impedance: 10m OHM on all range. Over Protection: 500v Dc. Or peak Ac on all range. Ac Voltage -- Input impedance: 10m OHM on all range. Frequency range: 40Hz to 400Hz. Over load protection:350v rms or 500v Peak continuous on ac range. Resistance - Ac current - Diode test And continuity-   Package content -- Ac dc Clamp meter x 1 Sets of test leads x 1             We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Digital Clamp Meter Reads Volts Amps, OHMS, ELECTRICAl USE DESCRIPTION:- Digital Clamp Meter Reads Volts Amps, OHMS, backlight. Data Hold, Resistance Contnuity buzzer. Specification ---- DC Voltage- Input impedance: 10m OHM on all range. Over Protection: 500v Dc. Or peak Ac on all range. Ac Voltage -- Input impedance: 10m OHM on all range. Frequency range: 40Hz to 400Hz. Over load protection:350v rms or 500v Peak continuous on ac range. Resistance - Ac current - Diode test And continuity-   Package content -- Ac dc Clamp meter x 1 Sets of test leads x 1             We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm                   Description:- BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm SPECIFICATIONS Basic Functions Range Best Accuracy DC Voltage 200mV/2V/20V/200V/V (0.5%+1) AC Voltage 200mV/2V/20V/200V/750V (0.8%+3) DC Current 20mA/200mA/2mA/20mA/200mA/2A/10A (0.8%+1) AC Current 200mA/2mA/20mA/200mA/2A/10A (1%+3) Resistance 200W/2kW/20kW/200kW/2MW/20MW/200MW (0.8%+1) Special Functions     Fused 10A Range          Transistor          Diode          Continuity Buzzer          Sleep Mode          Low Battery Display          Input Impedance for DC Voltage Measurement 10MW          Max. Display         

New Page 1 New Page 1 MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Features: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       " width="513" height="518"> MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter New Page 1 Glass Circle Cutter Can Cut a Exact Round Circle! Glass Circle Cutter Tool Glass Circle Cutter Tool This Glass Circle Cutter   Can Cut a Exact Round Circle! Specifications: Product Name Glass Cutter Material Plastic & Metal Suit for Glass Circle Cutting Package 18" x  Glass Cutter

we only accept Paisapay New Page 1 New Page 1   MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter DESCRIPTION Features: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 PRODUCT DESCRIPTION-:   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Size: mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter   PRODUCT DESCRIPTION-: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual   Powered by Turbo Lister

New Page 1 New Page 1 New Page 1   MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter DESCRIPTION Features: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 PRODUCT DESCRIPTION-:   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Size: mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us