Dc red sneaker original

WELCOME TO INVENTORY.STORE *** *** 12V DC OPERATED A PACK OF 10 PIECES  RGB LED MODULE + IR REMOTE KIT+12V 1A ADAPTOR  ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! PLEASE NOTE HERE IN PICTURE YOU SEE A SERIES OF 20 PIECES BUT YOU WILL GET ONLY 10 PIECES THESE ARE THE ORIGINAL IMAGES OF THE AQUARIUM WITH THESE CHANGEABLE LIGHTS      !!!  DESCRIPTIONS  !!!   Operating Voltage: 12V DC Maximum Power Consumption: 0.72W Working Temperature: -20 o   ~ 50 o PCB Size: mm LED Quantity: 3pcs/PCB Shell Material: Milky Transparent Plastic Shell LED Type: SMD RBG Viewing Angle: 180 o Luminescent Colors: Full Color Life:> hours Adhesive Fixed: Double-Sided Adhesive 24Key Remote Controller:     Connection mode: Common Anode(+)    Input: 12V    Output: 12V    Max load current:2A each color    Working Temperature: -20°C-60°C    Control box dimension: 50mm x34mm x22mm    Remote controller dimension: 85mm x 52mm x 6mm    Remote controller battery 3V: 1xCR    On: Turn on Power.    Off: Power off.    R: change color to red.    G: Switch to green color.    B: change color to blue.    w: change color to white    (And each color on the ir remote changes the led strip color to the same)          FLASH: color changing automatically, quickly jump.    STROBE: automatically change color, gentle jump.    FADE: automatic color change, gradually move quickly.    SMOOTH: automatic color chan ge, gradually move smoothly. 12V 1A   Power Supply: Input: V AC Hz  Out put: 12V 1A   Applications: Channel Letters Back Lighting, Indoor /Outdoor Advertisement Signs Back Lighting Advertisement Light Boxes Back Lighting Advertisement Billboards Back Lighting Logo Back Lighting Interior Decorative Light DIY Projects Fish Aquarium Lighting

Shipping Payments Return policy About us   24V 8A Convection Cooled Charger Replacement For Invacare TDX4, TDX5 Brand: UPG MFG Part#: 24BCT-1 SKU: Condition: New   Item description Wheelchair & Scooter Certified - 8 Amp. Convection Cooled - No Noise.  3 Pin D (XLR)  Microphone Plug Connector. Short Circuit Protection, Over Current Protection, Over Voltage Protection and Polarity Reversal. LED Status Indicator. VAC Useful links Add to Favorite Sellers Ask seller a question Sign up to Newsletter Visit seller's Shop Condition Tech specs Ship/Pay Policy Return Policy About Us / Feedback Condition Return to top This product is brand new. Original manufacturer supplied accessories are included. Full manufacturers warranty is included. For more information on the product warranty, please send a self addressed stamped envelope to: Ecom inc, th Street BLDG A3K, Brooklyn, NY Tech specs Return to top 24V   8A  CHARGER 24 volt 8 amp Premium Quality Heavy Duty off-board portable switching mode battery charger convection cooled, Underwriters Laboratories UL¨ Listed for Sealed  AGM, GEL batteries recommended for 35 ah - 100 ah. This 3 stage Smart Charger with Automatic shut-off has Overcharge Protection by Universal Power. Standard 3-prong Male  XLR  plug/connector which fits Female  XLR  port for electric mobility scooter, wheelchair, power chair.   CHARGING A BATTERY: Follow these steps to charge a battery: Connect the charger DC output cable to the battery terminal receptacle. Plug the charger power cord into the charger. Plug the power cord into wall. The green "Power" LED (LED 1) should be on. LED 2 should also be on (it will either be red, orange or green depending on the state of the charge of the batteries.   LED INDICATORS: LED 1     Power On ----------------------------------- Green LED 2     Fast Charge -------------------------------- Red              Top Charging ---------------------------- Orange              Fully Charged/Floating ----------------- Green LED 3     Battery Failure/Disconnected ---------- Blue   THREE STAGE CHARGE CYCLE: An integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states.   SAFETY FEATURES: Short-circuit Protection - Protects the charger from short-circuit damage. Over Current Protection - Protects the charger from over-current demand Over Voltage Protection - Protects the batteries from damage. Battery Polarity Reversal - Protects the charger and batteries against incorrectly installed batteries. Low Battery Voltage - When the battery is under 16V, the charger will not operate.   SPECIFICATIONS: 1 Input Voltage Vac  +/-10% 2 Input Frequency Hz 3 Output Voltage      Fast Charge (Bulk)      Float DC 29.4V +/- 0.5V DC 27.4V +/- 0.5V 4 Output Current      Fast Charge (Bulk) DC mA 5 Battery Capacity Ahr (Suggested) 6 Operating Temperature +32 F/0 C to +104 F/40 C 7 Storage Temperature -4 F/-20 C to +176 F/80 C 8 Power Supply Cord SJT, 18AWGX3C, 300V 105 C

Shipping Payments Return policy About us   24V 8A Convection Cooled Charger Replacement For Invacare TDX3 Brand: UPG MFG Part#: 24BCT-1 SKU: Condition: New   Item description Wheelchair & Scooter Certified - 8 Amp. Convection Cooled - No Noise.  3 Pin D (XLR)  Microphone Plug Connector. Short Circuit Protection, Over Current Protection, Over Voltage Protection and Polarity Reversal. LED Status Indicator. VAC Useful links Add to Favorite Sellers Ask seller a question Sign up to Newsletter Visit seller's Shop Condition Tech specs Ship/Pay Policy Return Policy About Us / Feedback Condition Return to top This product is brand new. Original manufacturer supplied accessories are included. Full manufacturers warranty is included. For more information on the product warranty, please send a self addressed stamped envelope to: Ecom inc, th Street BLDG A3K, Brooklyn, NY Tech specs Return to top 24V   8A  CHARGER 24 volt 8 amp Premium Quality Heavy Duty off-board portable switching mode battery charger convection cooled, Underwriters Laboratories UL¨ Listed for Sealed  AGM, GEL batteries recommended for 35 ah - 100 ah. This 3 stage Smart Charger with Automatic shut-off has Overcharge Protection by Universal Power. Standard 3-prong Male  XLR  plug/connector which fits Female  XLR  port for electric mobility scooter, wheelchair, power chair.   CHARGING A BATTERY: Follow these steps to charge a battery: Connect the charger DC output cable to the battery terminal receptacle. Plug the charger power cord into the charger. Plug the power cord into wall. The green "Power" LED (LED 1) should be on. LED 2 should also be on (it will either be red, orange or green depending on the state of the charge of the batteries.   LED INDICATORS: LED 1     Power On ----------------------------------- Green LED 2     Fast Charge -------------------------------- Red              Top Charging ---------------------------- Orange              Fully Charged/Floating ----------------- Green LED 3     Battery Failure/Disconnected ---------- Blue   THREE STAGE CHARGE CYCLE: An integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states.   SAFETY FEATURES: Short-circuit Protection - Protects the charger from short-circuit damage. Over Current Protection - Protects the charger from over-current demand Over Voltage Protection - Protects the batteries from damage. Battery Polarity Reversal - Protects the charger and batteries against incorrectly installed batteries. Low Battery Voltage - When the battery is under 16V, the charger will not operate.   SPECIFICATIONS: 1 Input Voltage Vac  +/-10% 2 Input Frequency Hz 3 Output Voltage      Fast Charge (Bulk)      Float DC 29.4V +/- 0.5V DC 27.4V +/- 0.5V 4 Output Current      Fast Charge (Bulk) DC mA 5 Battery Capacity Ahr (Suggested) 6 Operating Temperature +32 F/0 C to +104 F/40 C 7 Storage Temperature -4 F/-20 C to +176 F/80 C 8 Power Supply Cord SJT, 18AWGX3C, 300V 105 C

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC0.02445 V-25 V Voltage analog resolution: 0.00489 V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

NEW Excel Digital multimeter is a great tool for electricians With Original Cable Fully 1 Month Guaranty  Cash On Delivery With Perfect Shipping By Blue-dart Plug & Use Best Quality Product Visit my Store for More wonderful Items ! buy it now! Digital Multimeter  DTA                                                                                                       Digital multimeter is a great tool for electricians, contractors, and other such professions as well as being a handy tool to have around the house for home repair. Large LCD display with high accuracy Measure AC/ DC voltage, AC/ DC current, resistance, capacitance and diode Stable performance, high reliability,  Max LCD display:  ,  Operating condition: 0 to 40 deg C  Power Supply:9V battery  ,  Dimension:186mm*86mm*33mm  ,  Weight: 380g Comes with one black test lead and one red test lead LCD display panel angle selection: with the button