Digital m92a diode

we only accept Paisapay New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay Mastech Digital Multimeter (M92A) Diode test, transistor test, continuity buzze  

New Page 1 New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

MASTECH MSC Digital Multimeter Type-K Thermocouple Contact AC/DC Tester Detector with Diode Tests voltage, current and resistance Diode check and continuity test Data hold and display back light Type-K thermocouple contact temperature measurement Safety rating up to CAT. II 600V Specifications: DC Voltage: 200m/2V/20V/200V¡ÀV¡À0.8% AC Voltage: 200V¡ÀV¡À1.2% DC Current: 200¦ÌA¡À1.0%, 2mA¡ÀmA¡ÀmA¡ÀA¡À3.0% Resistance: k/20k/200k¡À0.8%, 2M¦¸¡À1.0% Temperature: -20 to 0 Centigrade ¡À to 400 Centigrade ¡À to Centigrade ¡À2.0%/-4 to 32 Fahrenheit ¡À to 752 Fahrenheit ¡À to Fahrenheit ¡À2.0% Sampling rate: 3 times per second   Power Supply: 9V battery included SKU: X1IN Package includes: 1 * MSC Digital Multimeter (with 1 set test leads) 1 * User Manual Heavy Duty Product Good Quality

SMALL  DIGITAL MULTIMETER       Small Multimeter for your day to day needs If you have basic knowledge about Multimeters you can try this small Multimeter for basic continuity checks & Voltage Meaurements      Description 1.  Functions DCV ACV DCA Resistor (ohms) Diode Buzzer Transistor (HFE) Temperature Square Wave Output Battery Test   2.  Display 4.75 cm length, 15mm high LCD. 3.  Operating Instructions When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to "V 0 mA" jack and black test lead to "COM" jack. When testing the current more than 200mA, connect the red test lead to "' OADC" jack and black test lead to •COM" jack When testing the temperature, connect the temperealure probe to "V, 0, mA" jack or "COM" jack. It can also be connected to the jack specialised for it. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight-hole jack. Square wave output: the frequency is 50Hz, the voltage is approx. 3Vp-p. The output jack is "V, 0, mA" and •COM". General Powered by 9V Battery Inside Dimensions Multimeter : 12.5 cms(Length) X 6.75 cms(Width) X 2.25 cms (Thickness) Wire Length (Including Pin): 71 cms each              

New Page 1 New Page 1 Digital Clamp Meter Reads Volts Amps, OHMS, ELECTRICAl USE DESCRIPTION:- Digital Clamp Meter Reads Volts Amps, OHMS, backlight. Data Hold, Resistance Contnuity buzzer. Specification ---- DC Voltage- Input impedance: 10m OHM on all range. Over Protection: 500v Dc. Or peak Ac on all range. Ac Voltage -- Input impedance: 10m OHM on all range. Frequency range: 40Hz to 400Hz. Over load protection:350v rms or 500v Peak continuous on ac range. Resistance - Ac current - Diode test And continuity-   Package content -- Ac dc Clamp meter x 1 Sets of test leads x 1             We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Digital Clamp Meter Reads Volts Amps, OHMS, ELECTRICAl USE DESCRIPTION:- Digital Clamp Meter Reads Volts Amps, OHMS, backlight. Data Hold, Resistance Contnuity buzzer. Specification ---- DC Voltage- Input impedance: 10m OHM on all range. Over Protection: 500v Dc. Or peak Ac on all range. Ac Voltage -- Input impedance: 10m OHM on all range. Frequency range: 40Hz to 400Hz. Over load protection:350v rms or 500v Peak continuous on ac range. Resistance - Ac current - Diode test And continuity-   Package content -- Ac dc Clamp meter x 1 Sets of test leads x 1             We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

MASTECH MSG Digital Clamp Meter Current AC DC Voltage Resistance Tem DESCRIPTION-:   MASTECH MSG Digital Clamp Meter Current AC DC Voltage Resistance Temperature Features: counts LCD display Jaw opening up to 55mm Diode check and continuity test Type-K thermocouple contact temperature measuring Test AC/DC voltage, AC current, resistance, frequency and temperature Overrange indication, low battery indication and Polarity indication Specifications: DC voltage: V¡ÀV¡À1.0% AC voltage: V¡À2.0% AC current: A =600A¡À3.0% Resistance: 200ohm¡Àk/2M ohms¡À1.5% Frequency: 2kHz¡ÀkHz¡À1.5% Temperature: 0 to 750 Centigrade¡À to Fahrenheit¡À2.0% Maximum voltage between terminals and earth ground: CAT II V dc or 750V ac rms. (sine) Display: LCD, counts, updates 2-3/sec. Jaw opening capability: 55mm (Max conductor size) Power supply: 9V battery (NEDA or IEC 6F22)   Operating Environment: 0 to 40 Centigrade Storage temperature: -10¡æ to 50 Centigrade Package includes: 1 * MSG Clamp meter 1 * Set test leads 1 * K-type themocouple probe 1 * User manual  

New Page 1 New Page 1 PRODUCT DESCRIPTION:- Digital Multi Meter Display: 26 x 61 mm LCD   Display: 26 x 61 mm LCD DC voltage: 200mV/V ± 8%   AC voltage: V ± V ± 2%   DC current: m/20mA ± m/2A ± 2%, 10A   AC current: 2m/20mA ± m/2A ± 8%, 10A   Resistance: K/20K/200K/2M Ohm ± 8%, 20M   Continuity checking with buzzer   Diode check: Test current 0.8mA, test voltage 2.5V   HFE:   Power source: 6F22(9V) x 1   Size weight: 85 x 165 x 32 mm, 250g (including battery)   Display: 26 x 61 mm LCD We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 Digital Clamp Meter MASTECH MS AC/DC Voltage Tester with Diode & Plastic Box Description: We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 PRODUCT DESCRIPTION:- Digital Multi Meter Display: 26 x 61 mm LCD   Display: 26 x 61 mm LCD DC voltage: 200mV/V ± 8%   AC voltage: V ± V ± 2%   DC current: m/20mA ± m/2A ± 2%, 10A   AC current: 2m/20mA ± m/2A ± 8%, 10A   Resistance: K/20K/200K/2M Ohm ± 8%, 20M   Continuity checking with buzzer   Diode check: Test current 0.8mA, test voltage 2.5V   HFE:   Power source: 6F22(9V) x 1   Size weight: 85 x 165 x 32 mm, 250g (including battery)   Display: 26 x 61 mm LCD We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New multi tester for testing voltage AC/DC Current, resistance. Diode, transistor and with Continuity Test Resistance = 1 to 2M omhs Voltage up to v Current up to 10A The product will dispatch through India postal service speed post fastest and safest way

DT87 DCV:600V               ¡À(0.5% + 1) ACV:450V               ¡À(1% + 4) ACA:20A-400 A           ¡À(2% + 5) OHM:2K                 ¡À(1% + 2) Continuity Buzzer:yes Data Hold:yes Diode Test:yes Power:1.5V(AAA)*2 Maximum Display: Display Size:mm Product Net Weight:145g Powered by Turbo Lister