Digital transistor

SMALL  DIGITAL MULTIMETER       Small Multimeter for your day to day needs If you have basic knowledge about Multimeters you can try this small Multimeter for basic continuity checks & Voltage Meaurements      Description 1.  Functions DCV ACV DCA Resistor (ohms) Diode Buzzer Transistor (HFE) Temperature Square Wave Output Battery Test   2.  Display 4.75 cm length, 15mm high LCD. 3.  Operating Instructions When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to "V 0 mA" jack and black test lead to "COM" jack. When testing the current more than 200mA, connect the red test lead to "' OADC" jack and black test lead to •COM" jack When testing the temperature, connect the temperealure probe to "V, 0, mA" jack or "COM" jack. It can also be connected to the jack specialised for it. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight-hole jack. Square wave output: the frequency is 50Hz, the voltage is approx. 3Vp-p. The output jack is "V, 0, mA" and •COM". General Powered by 9V Battery Inside Dimensions Multimeter : 12.5 cms(Length) X 6.75 cms(Width) X 2.25 cms (Thickness) Wire Length (Including Pin): 71 cms each              

New Page 1 New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

Product Description DIGITAL MULTIMETER the digital multimeter, DMM is one of the most useful items of test equipment. Basic instruments can measure current voltage and resistance, but most include the capability to measure many other values. DMM facilities While the facilities that a digital multimeter can offer are much greater than their analogue predecessors, the cost of DMMs is relatively low. DMMs are able to offer as standard the basic measurements that would typically include: Current (DC) Current (AC) Voltage (DC) Voltage (AC) Resistance However, using integrated circuit technology, most DMMs are able to offer additional test capabilities. These may include some of the following: Capacitance Temperature Frequency Transistor test – hfe, etc Continuity (buzzer) While some of these additional test features may not be as accurate as those supplied by dedicated test instruments, they are nevertheless very useful, especially where approximate readings only are needed. In addition to an increase

New multi tester for testing voltage AC/DC Current, resistance. Diode, transistor and with Continuity Test Resistance = 1 to 2M omhs Voltage up to v Current up to 10A The product will dispatch through India postal service speed post fastest and safest way

we only accept Paisapay New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 Digital LCD Multimeter Voltmeter OHM-Meter AMP-Meter For Home or Workshop DESCRIPTION Digital LCD Voltmeter OHM-Meter AMP-Meter AMMETER Professional Multimeter Measures AC and DC volts, current, resistance (ohms), diode continuity and transistor hFE. Electronic Specialties Digital Multimeter: This is an economical digital multimeter that has all most common ranges. This heavy duty digital multimeter is equally suited to industrial use as it is to home or workshop use. Removable thick rubber casing protects the multimeter from splashes and minor bumps. Test leads and 9V battery included. Large LCD display with blue backlight. Low power requirement with auto power-off. Data hold function.20 Position rotary switch. Specifications: Count display Continuity beeper Fuse protection: F-200mA/250V (O5x20MM) Operating Temperature: -0'C to 40'C (relative humidity Storage Temperature: -10'C to 50'C (relative humidity Guaranteed precision Temperature: 23+_5 'C (relative humidity Automatic display of negative polarity "_" Low Battery Indication: - /+ display Full overload protection Five functions with 19 ranges + Off DC voltage - 200mV, 2V, 20V, 200V, 600V AC voltage - 200V, 600V DC current - 200µA, µA, 20mA, 200mA, 10A Resistance - k, 200k, 20M Diode test Transistor test Requires one 9-V battery (Included) Package includes: 1x Voltmeter with Rubber Case 2x Test Leads (Neg. and Pos.) 1x 9V Battery installed   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Digital LCD Multimeter Voltmeter OHM-Meter AMP-Meter For Home or Workshop DESCRIPTION Digital LCD Voltmeter OHM-Meter AMP-Meter AMMETER Professional Multimeter Measures AC and DC volts, current, resistance (ohms), diode continuity and transistor hFE. Electronic Specialties Digital Multimeter: This is an economical digital multimeter that has all most common ranges. This heavy duty digital multimeter is equally suited to industrial use as it is to home or workshop use. Removable thick rubber casing protects the multimeter from splashes and minor bumps. Test leads and 9V battery included. Large LCD display with blue backlight. Low power requirement with auto power-off. Data hold function.20 Position rotary switch. Specifications: Count display Continuity beeper Fuse protection: F-200mA/250V (O5x20MM) Operating Temperature: -0'C to 40'C (relative humidity Storage Temperature: -10'C to 50'C (relative humidity Guaranteed precision Temperature: 23+_5 'C (relative humidity Automatic display of negative polarity "_" Low Battery Indication: - /+ display Full overload protection Five functions with 19 ranges + Off DC voltage - 200mV, 2V, 20V, 200V, 600V AC voltage - 200V, 600V DC current - 200µA, µA, 20mA, 200mA, 10A Resistance - k, 200k, 20M Diode test Transistor test Requires one 9-V battery (Included) Package includes: 1x Voltmeter with Rubber Case 2x Test Leads (Neg. and Pos.) 1x 9V Battery installed   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 Digital LCD Multimeter Voltmeter OHM-Meter AMP-Meter For Home or Workshop DESCRIPTION Digital LCD Voltmeter OHM-Meter AMP-Meter AMMETER Professional Multimeter Measures AC and DC volts, current, resistance (ohms), diode continuity and transistor hFE. Electronic Specialties Digital Multimeter: This is an economical digital multimeter that has all most common ranges. This heavy duty digital multimeter is equally suited to industrial use as it is to home or workshop use. Removable thick rubber casing protects the multimeter from splashes and minor bumps. Test leads and 9V battery included. Large LCD display with blue backlight. Low power requirement with auto power-off. Data hold function.20 Position rotary switch. Specifications: Count display Continuity beeper Fuse protection: F-200mA/250V (O5x20MM) Operating Temperature: -0'C to 40'C (relative humidity Storage Temperature: -10'C to 50'C (relative humidity Guaranteed precision Temperature: 23+_5 'C (relative humidity Automatic display of negative polarity "_" Low Battery Indication: - /+ display Full overload protection Five functions with 19 ranges + Off DC voltage - 200mV, 2V, 20V, 200V, 600V AC voltage - 200V, 600V DC current - 200µA, µA, 20mA, 200mA, 10A Resistance - k, 200k, 20M Diode test Transistor test Requires one 9-V battery (Included) Package includes: 1x Voltmeter with Rubber Case 2x Test Leads (Neg. and Pos.) 1x 9V Battery installed   Powered by Turbo Lister

NEW DIGITAL MULTI METER SOLVE ALL SMALL PROBLEM YOURSELF This meter is Polarity & overload protected. 3 1/2" LCD display. Red and Black test leads are included. Seven functions + nineteen ranges to cover     Ideal tool for checking Electronic Products   Operation instruction when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "v o, mA" jack and black test lead to "COM" jack. when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. when testing the temperature, connect the temperature probe to "V,  0  mA" jack or "COM" jack It can also be connect to the jack specialised for it. when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. squre wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V, 0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V, DC current 200 microamp-10 Amp, Resistance meg Ohm and Transistor & diode test. AC and DC voltage resistance DC amps battery and diode testing

New Page 1 New Page 1 MASTECH MSE Counts Digital Multimeter with NCV & Inductance LCR Description: The Mastech MSE is a fully featured digital multimeter with all the functions you may need for your daily usage. Its 30-range rotary switch covers 10 different functions including AC/DC voltage and current, resistance, capacitance, inductance, diode check, continuity test and transistor check. This meter also has a built-in non-contact sensor for detecting AC voltage greater than 110 volts.   Features: Large counts LCD display Built-in non-contact voltage detector Tests AC/DC voltage and current, resistance, capacitance Inductance measurement up to 20H Transistor (hFE) check, diode and continuity test Data hold and display back light Safety rating up to CAT.IV 600V Non-Contact Voltage Detector   Specifications:   DCV:mV - 2V - 20V - 200V ± V ± 0.8% ACV:0 - 2V - 20V - 200V ± V ± 1.2% DCA:mA ± A ± 2.0% ACA:mA ± A ± 3.0% R:k - 20k - 200k - 2M ± M ohm ± M ohm ± 5.0% CAP:0 - 20nF - 200nF - 2uF ± uF ± 5.0%; INDUCTANCE: 0 - 20mH - 200mH - 2H - 20H ± 3.0% Audible continuity: hFE: Diode test: 1 mA, 2.8V; Battery: 9Vx1, NEDA F22   Key features: Built-in non-contact AC voltage sensor with flash warning (> 110V AC) Auto power off Data hold Back-lit 3 1/2 digit LCD display Low battery indication Polarity indication Includes: MSE Test leads User manual We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 MASTECH MSE Counts Digital Multimeter with NCV & Inductance LCR Description: The Mastech MSE is a fully featured digital multimeter with all the functions you may need for your daily usage. Its 30-range rotary switch covers 10 different functions including AC/DC voltage and current, resistance, capacitance, inductance, diode check, continuity test and transistor check. This meter also has a built-in non-contact sensor for detecting AC voltage greater than 110 volts.   Features: Large counts LCD display Built-in non-contact voltage detector Tests AC/DC voltage and current, resistance, capacitance Inductance measurement up to 20H Transistor (hFE) check, diode and continuity test Data hold and display back light Safety rating up to CAT.IV 600V Non-Contact Voltage Detector   Specifications:   DCV:mV - 2V - 20V - 200V ± V ± 0.8% ACV:0 - 2V - 20V - 200V ± V ± 1.2% DCA:mA ± A ± 2.0% ACA:mA ± A ± 3.0% R:k - 20k - 200k - 2M ± M ohm ± M ohm ± 5.0% CAP:0 - 20nF - 200nF - 2uF ± uF ± 5.0%; INDUCTANCE: 0 - 20mH - 200mH - 2H - 20H ± 3.0% Audible continuity: hFE: Diode test: 1 mA, 2.8V; Battery: 9Vx1, NEDA F22   Key features: Built-in non-contact AC voltage sensor with flash warning (> 110V AC) Auto power off Data hold Back-lit 3 1/2 digit LCD display Low battery indication Polarity indication Includes: MSE Test leads User manual We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay Mastech Digital Multimeter (M92A) Diode test, transistor test, continuity buzze  

New Page 1 New Page 1 MASTECH MSG Auto-ranging Digital Multimeter DMM Tester with NCV & Te Description: MASTECH MSG Auto-ranging Digital Multimeter DMM Tester with NCV & Temp. Large Counts LCD Display 40 segments bar graph Built-in Non-Contact Voltage Detector Tests AC/DC Voltage and Current, Resistance, Frequency, Duty Cycle and Capacitance Transistor (hFE) Check, Diode and Continuity Test Type K thermocouple contact temperature measurement Data Hold and Display Back Light Safety Rating up to CAT.IV   600V Function Range Accuracy     MSF DC Voltage 400mV/4V/40V/400V/V ±(0.5%rdg + 2dgt ) AC Voltage 400mV/4V/40V/400V/750V ±(0.8%rdg + 2dgt) DC Current 400uA/4mA/40mA/400mA ±(0.8%rdg + 2dgt) 10A ±(1.2%rdg + 2dgt) AC Current 400uA/4mA/40mA/400mA ±(1.5%rdg + 2dgt) 10A ±(3%rdg + 2dgt) Resistance 400Ω /K Ω/40K Ω/400KΩ/ 4MΩ/40MΩ ±(1.2%rdg + 2dgt) Capacitance 4nF/40nF/400nF/4uF/40uF/100uF   40nF/400nF/4uF/40uF/400uF/uF ±(3%rdg + 5 dgt) Frequency 0.1Hz~10MHz ±(0.5%rdg +2dgt) Duty %rdg +2dgt) Temperture -%rdg +2dgt) Hfe √ Diode Test   √ Continuity   √ Non-contact voltage detect   √ Counts   Display Digital&analog bar Power 9V 6F22 Weight 350g Size 92mm× 188mm ×50mm

we only accept Paisapay New Page 1 MASTECH MSG Auto-ranging Digital Multimeter DMM Tester with NCV & Te Description: MASTECH MSG Auto-ranging Digital Multimeter DMM Tester with NCV & Temp. Large Counts LCD Display 40 segments bar graph Built-in Non-Contact Voltage Detector Tests AC/DC Voltage and Current, Resistance, Frequency, Duty Cycle and Capacitance Transistor (hFE) Check, Diode and Continuity Test Type K thermocouple contact temperature measurement Data Hold and Display Back Light Safety Rating up to CAT.IV   600V Function Range Accuracy     MSF DC Voltage 400mV/4V/40V/400V/V ±(0.5%rdg + 2dgt ) AC Voltage 400mV/4V/40V/400V/750V ±(0.8%rdg + 2dgt) DC Current 400uA/4mA/40mA/400mA ±(0.8%rdg + 2dgt) 10A ±(1.2%rdg + 2dgt) AC Current 400uA/4mA/40mA/400mA ±(1.5%rdg + 2dgt) 10A ±(3%rdg + 2dgt) Resistance 400Ω /K Ω/40K Ω/400KΩ/ 4MΩ/40MΩ ±(1.2%rdg + 2dgt) Capacitance 4nF/40nF/400nF/4uF/40uF/100uF   40nF/400nF/4uF/40uF/400uF/uF ±(3%rdg + 5 dgt) Frequency 0.1Hz~10MHz ±(0.5%rdg +2dgt) Duty %rdg +2dgt) Temperture -%rdg +2dgt) Hfe √ Diode Test   √ Continuity   √ Non-contact voltage detect   √ Counts   Display Digital&analog bar Power 9V 6F22 Weight 350g Size 92mm× 188mm ×50mm

New Page 1 New Page 1                                                                                       B randed UT58B Modern Digital Voltage Current Resistance Capacitance Temperature Multimeters UT-58B Description:- B randed UT58B Modern Digital Voltage Current Resistance Capacitance Temperature Multimeters UT-58B Specifications: * Basic Functions: * DC Voltage: 200mV/2V/20V/200V/V, (0.5%+1) * AC Voltage: 2V/20V/200V/750V, (0.8%+3) * DC Current: 2mA/20mA/200mA/20A, (0.8%+1) * AC Current: 2mA/200mA/20A, (1%+3) * Resistance: 200W/2kW/20kW/2MW/20MW/200WM, (0.8%+1) * Capacitance: 2nF/200nF/100mF, (4%+3) * Temperature(oC): -40oC ~ oC, (1%+3) Special Functions: * Diode * Continuity Buzzer * Transistor * Data Hold * Full Icon Display * Sleep Mode * Low Battery Display * Input Impedance for DC Voltage Measurement: Around 10MW * Max Display: Standard Accessories: Test Lead, English Manual, Point Contact Temperature Probe,Multi-Purpose Socket, Holster Optional Accessories: Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) Package Contents: 1x UNI-T UT-58B Modern Digital Multimeters   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Features: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       " width="513" height="518"> MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter New Page 1 Glass Circle Cutter Can Cut a Exact Round Circle! Glass Circle Cutter Tool Glass Circle Cutter Tool This Glass Circle Cutter   Can Cut a Exact Round Circle! Specifications: Product Name Glass Cutter Material Plastic & Metal Suit for Glass Circle Cutting Package 18" x  Glass Cutter

New Page 1 New Page 1 Mastech MSH AC/DC Handheld Digital Multimeter & LCR Meter DESCRIPTION Mastech MSH AC/DC Handheld Digital Multimeter & LCR Meter LCR MULTIMETER WITH BARGRAPH 3 1/2 digits LCD display with 40 segments high speed bar graph Data hold & LCD backlit TTL logic test, Auto power off Secondary injection molding housing Editorial Review: Technical specifications - DCV:mV-6V-60V-600V-V±0.5% - ACV:mV-2V-20V-±V-700V±1.2% - DCA:0-2mA-20mA±mA-10A±2.0% - ACA:0-2mA-20mA±mA10A±3.0% - Frequency: 20K Hz ±1.5% - R:k-20k-200k-2M±M ohm±M ohm - CAP:0-2nF/20nF/200nF/20uF±2.0%; - Inductance:2mH/20mH/200mH/2H/20H; - Temp: F and C.-20°C-°C±3.0%; /-4°F-+ °F; - Audible continuity: - Transistor hFE:; - Diode test: 10mA,6.0V; - Batt:9Vx1,NEDA F22;

New Page 1 New Page 1 Mastech MAS830L Digital Multimeter - Multi meter with Probes (Original) Description:- Specification: Features: Pocket Size and counts LCD Display Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold Content: 1 x MS830L Digital MULT Meter Pair of testing leads 9 Volt Battery Operating Instruction Mannual Retail Box                                                                                                                                                                                                                      We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Mastech MAS830L Digital Multimeter - Multi meter with Probes (Original) Description:- Specification: Features: Pocket Size and counts LCD Display Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold Content: 1 x MS830L Digital MULT Meter Pair of testing leads 9 Volt Battery Operating Instruction Mannual Retail Box                                                                                                                                                                                                                      We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 PRODUCT DESCRIPTION-:   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Size: mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter   PRODUCT DESCRIPTION-: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual   Powered by Turbo Lister

New Page 1 New Page 1 PRODUCT DESCRIPTION-:   Brand New MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter Size: mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm   Package Including: 1* Digital Clamp Multimeter 2 * Test Leads 1 * English Manual       We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm                   Description:- BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm SPECIFICATIONS Basic Functions Range Best Accuracy DC Voltage 200mV/2V/20V/200V/V (0.5%+1) AC Voltage 200mV/2V/20V/200V/750V (0.8%+3) DC Current 20mA/200mA/2mA/20mA/200mA/2A/10A (0.8%+1) AC Current 200mA/2mA/20mA/200mA/2A/10A (1%+3) Resistance 200W/2kW/20kW/200kW/2MW/20MW/200MW (0.8%+1) Special Functions     Fused 10A Range          Transistor          Diode          Continuity Buzzer          Sleep Mode          Low Battery Display          Input Impedance for DC Voltage Measurement 10MW          Max. Display         

Check out my   other items ! HTC DM-97 DIGITAL MULTIMETER Buy with Confidence. Description: 3¾ Digital Multimeter   Counts  Large LCD Display with Auto/Manual Range Data Hold, Max. / Min. Value Hold Capacitance, Frequency / Duty Cycle, Temperature and Transistor Test  No Power-OFF under natural operation

we only accept Paisapay New Page 1 New Page 1   MT87 Digital Multimeter Electronic Tester AC/DC Clamp Meter DESCRIPTION Features: 40mm (diagonal) LCD Display Max display: , Auto polarity display Small and compact design Data hold function Overload protection on all ranges Battery low indication   Specifications: Measuring range: Max AC Current:400A Max AC Voltage range:450V Max DC Voltage range:600V Resistance Measurement:200K Ohm range Diode Test / Transistor P-N junction test Continuity test with buzzer sound while Power: 2 x AAA Battery (not include) Weight: 121g Size: cm We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 DESCRIPTION-: Mastech MS G Multi Range Digital Multimeter MS G DMM Measures DC and AC current, DC and AC voltage, resistance, condenser capacitance, temperature of wide ranges as well as to test transistor hFE and sygnal frequency