Display feedback

Display Port to VGA Adapter for DELL, HP, ATI, AMD Description: DisplayPort to VGA Converter converts your digital displayport signal to analog VGA signal. It offers solutions for digital entertainment center, projector factory, noisy space and security concerns, conference room presentation, school and corporate training environments. Display resolution up to: x(WUXGA-R), 60Hz, 8bpc: 154MHz xP, 60Hz, 10bpc: 144MHz DisplayPort ver1.1:  DP two lanes or DP one lane RGB analog video   VGA port  output: Configured for 700mV voltage swing Automatic sink detection and stand by mode Spread spectrum (de-spreading) for EMI reduction EDID Pre-fetch (VGA EDID Conversion) Sink detection based on DDC return Measured power: Active 1.4W, Standby 100mW Power supply: +3.3V (Form DP) We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue before leaving a negative feedback. Contact Us on  - +91

Display Port to VGA Adapter for DELL, HP, ATI, AMD Description: DisplayPort to VGA Converter converts your digital displayport signal to analog VGA signal. It offers solutions for digital entertainment center, projector factory, noisy space and security concerns, conference room presentation, school and corporate training environments. Display resolution up to: x(WUXGA-R), 60Hz, 8bpc: 154MHz xP, 60Hz, 10bpc: 144MHz DisplayPort ver1.1:  DP two lanes or DP one lane RGB analog video   VGA port  output: Configured for 700mV voltage swing Automatic sink detection and stand by mode Spread spectrum (de-spreading) for EMI reduction EDID Pre-fetch (VGA EDID Conversion) Sink detection based on DDC return Measured power: Active 1.4W, Standby 100mW Power supply: +3.3V (Form DP) We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue before leaving a negative feedback. Contact Us on  -  +

Converts a graphics card's DisplayPort output to a DVI output for use with a Single Link DVI-D monitor. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please   contact   us to resolve any issue before leaving a negative feedback. Contact Us on:-

The Best Deal on   !!!!   HIGH QUALITY USB 3.0 TO VGA DISPLAY ADAPTER       PRODUCT INFORMATION: The USB3.0-VGA Display Adapter enables you to connect additional display devices  (CRT/LCD monitor, projector)  to your desktop or notebook pc. The connected display can act as  mirrored  or extended desktop of the main display on your pc.The  flexibility  of the common USB 3.0 technology saves the need to open the computer or struggling with  compatibility  issues related to the VGA card Specifications:   It supports up to six simultaneous displays, including widescreen displays, extending your desktop and your horizons, and each one can works for different using. windows 7/8  FEATURES: * USB 3.0 specification compliant  * Support analog video output interface D-SUB (VGA)  * Supports graphics display resolution  * UGA x (standard screen)  * WSXGA+ x and x (wide screen)  * Supports multiple display modes: Primary, Extended, Mirror  *identify monitor *display rotation  *multi-display control panel Color: Randomly I N THE PACKAGE: 1 x USB3.0-VGA display adapter User Manual 1x Driver/Manual CD Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH: +91 OR e-mail us on .digitalmall@ gmail.com OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

OLED 0.96" I2C IIC SPI Serial 128X64 WHITE Display LCD LED Module for Arduino What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306     Note: This item come I2C/IIC interface only. Because the hardware reasons, resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software...... published here for the Arduino library file, you can make this OLED module used in the Arduino system. Download File description:- IIC_without_ACK.cpp - SSD1306 drivers; IIC_without_ACK.h - SSD1306 driver file header; oledfont.c - matrix table (you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file, modulo the way " common cathode - out line - Reverse Output"; font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips). Function:- Write_IIC_Byte (unsigned char IIC_Byte); / / by IIC write an 8-bit data (such as 0xff) Write_IIC_Command (unsigned char IIC_Command); / / write command to the OLED module through IIC bus Begin_IIC_Data (); / / write data through the IIC bus open ready (which would allow a group of data transmission is complete and then turn off IIC, can greatly speed) IIC_SetPos (unsigned char x, unsigned char y); / / Set the starting point coordinates (x range 0 ~ 128, y ranges from 0 to 7) Fill_Screen (unsigned char fill_Data); / / Fill_Screen (0xff) - Full screen lit; Fill_Screen (0 × 00) - Full screen off (can be used to clear the screen) Char_F6x8 (unsigned char x, unsigned char y, const char ch []); / / display the ASCII character 6 × 8 Char_F8x16 (unsigned char x, unsigned char y, const char ch []);/ / display the ASCII character 8 × 16 CN_F16x16 (unsigned char x, unsigned char y, unsigned char N); / / display of 16 × 16 characters (this can be considered for the first time on the Arduino platform to achieve the display of Chinese characters) Draw_BMP (unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, const char BMP []); / / display BMP images of 128 × 64 The other functions is functional function. Usage: Please "IIC_without_ACK" folder to x: / arduino-1.5.5 / libraries directory, restart the Arduino IDE; Demo_IIC is based on the Arduino UNO sample program...... correct wiring and run.   Package Included: 1PCS * New  white 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Digital Thermometer with Beeping Sound & LCD display !! Easy for FEVER Measure ! Features Can be used orally, rectally and under the armpit. - Takes 60 seconds to measure body temperature. - Beeping sound lets you know when measurement is complete. - LCD display. - Easy to read. Accuracy  ± 0.1 Degree C. Range of measurement 32 Degrees C ~ 42 Degrees C. - ± 0.2 Degree F. Range of measurement 89.6 Degrees F- Degrees F. - Memory - Automatic shut-off Powered by 1x 1.55V LR41battery (battery included) No Color Choice- Color as Per Stock Available Package Contents 1 X Digital Thermometer 1x Storage Case Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH: +91 OR e-mail us on .digitalmall@ gmail.com OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

Other Items Feedbacks About Us Contact Us Add To Favorites CNB  Pc LM - Dot/Bar Display Driver IC LM Dot/Bar Display Driver Features Drives LEDs, LCDs or Vacuum Fluorescents Bar or Dot Display Mode Externally Selectable by User Expandable to Displays of 100 Steps Internal Voltage Reference from 1.2V to 12V Operates with Single Supply of Less than 3V   Package Type - 18 Pin DIP Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

8 Port VGA Video Splitter 130MHz Specification: 130 MHz Product Description: The VideoView is a 8 port VGA Video Splitter that allows a PC to display to as many as 8 monitors simultaneously. It is perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The VideoView supports monitors with up to 150MHz of bandwidth allowing it to display images. VideoView 8-Port VGA Video Splitter Number of Computers: 1 Number of Monitors: 8 Direct Graphics Modes: VGA Interfaces/Ports: 1 x 15-pin D-Sub (HD-15) Computer Dimensions: More or Less 2.04" Height x 8.81" Width x 5.98" Depth. Ideal for: Broadcasting information to the public Maintaining harsh work environment from safe locations Classroom or company training facilities Power computer users Advertisements Showroom displays. Warranty: 1 Month Seller Warranty. Important: Please Read Below before placing the order Shipment Partners Ø   All items are despatched through reputed couriers, Buyer needs to ensure and check that the shipping address is covered by our Logistic. Feedback – Very Important Ø   Dear all buyer we are requesting to you please do not Left Negative / Neutral Feedback. Because Negative / Neutral Feedback is not Solution. We want always 100% Satisfied customer. Customer satisfaction our Motive. Ø   Dear buyer if any problem product or our service related, you need to inform us. We will resolve your problem, asap. No need to open any complaint. Ø   There is nothing for which you should give negative / neutral feedback, for any problem

Description:-   Best quality FM Player with display A High quality speaker Gives awesome sound Rotating analog antenna Ac/Dc Power supply Feedback:   Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback   Your feedback is important for us to grow our business on , so that we can provide good products and good service to our customers. It is impossible to resolve issues if we are not aware about them! Our aim is to provide Top Level Customer Service and we are committed to give you a pleasant & rewarding experience on . 100% CUSTOMER SATISFACTION IS OUR GOAL. WE STRIVE FOR 5 STARS FEEDBACK FROM YOU. Please do not forget to CONFIRM THE RECEIPT OF THE PRODUCT on your account which helps us

Sound Sensor High Sensitivity Sound Detection Module for Arduino Features: 1.84 X 84 dot matrix LCD, can show 4 lines of characters 2.Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND. 3.Support different types of MCU, such as the arduino, AVR, SPI, MCS51 and so on. 4.Transfer rate up to 4Mbps, can full speed write display data without waiting time. 5.Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace. 4.LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small 5.Low power supply,the working current in normal situation is lower than 200μA,and has power-down mode Connections: 1.RST--------- reset 2.CE---------- chip selection 3.DC---------- data/commands choice 4.DIN--------- serial data line 5.CLK--------- serial Clock Speed 6.3.3V-------- VCC 7.LIGHT------- backlight control terminal 8.GND--------- power negative Specifications: 1.For Nokia 5110 3V-5V 2.Module size: 45.2mm x 43.1mm Package included: 1x LCD Module for Nokia 5110 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Ya Xun DTA+ 3 digits LCD display Digital Multimeter auto power off * Images Of Stock Item   Specifications 1. Auto off function  2. Full protection  3. 3 digits LCD display .applicable to electricians and qualified technicians    - A compact, battery operated, handheld with safety protector - Best choice for technicians, service men, students and hobbyists who required an instrument that is accurate, reliable and always ready for use - Auto ranging with good sensitivity, resolution and accuracy - Overload indication and protection, low battery indication - Packed with a pair of test leads (70cm) - Test leads and 1*6F22 battery (included) - Frequency: 200Khz - Capacitance: 2nF to 200uF - AC Volts: 200mV to 700V - DC Volts: 200mV to V - AC Current: 2mA to 10A - DC Current: 200UA to 10A - Resistance: 200 ohm to 200M ohm     Be sure to add me to your  favourites list ! Check out my  other items ! CONTACT  US For Any Further Query or Suggestion Email Us At      SHIPPING POLICY   ▪      All items are dispatched through reputed couriers & we don't use speedpost / indiapost. ▪       Mostly products are shipped within 2-3 working day after realization of payment. ▪       Octroi & local levies, if any, will be borne by the buyer at the time of delivery.   RETURN  POLICY   ▪     NO RETURNS are accepted for this Listing Unless Item Arrives Damaged. ▪     Returns are on conditional basis, subject to seller's discretion. ▪     Returns will be accepted only after approval. Please contact us prior to returning the product. ▪     Buyer has to pay all-return postage and shipping charges. ▪     Buyer would not be entitled for a refund or a replacement if the Product that is returned shows improper      use, improper handling or physical damage; missing manuals, missing original packing, box, parts and or accessories. FEEDBACK & DSR POLICY   ▪     Your Positive Feedback and 5 Stars DSR ratings are extremely important for us. ▪       We strive for 100% customer satisfaction and we love to leave Positive Feedbacks to our buyers. ▪       Please do leave Positive Feedback with 5 Stars

acc Payment Shipping Policy Return & Warranty Reply Feedback FAQ Apple   > Audio & Video   > Camera   > Cell Phone   > Laptop   > Video Game   > UK Store   > Other   > Black Touch Digitizer Screen + LCD Display Assembly for iPod Touch 5 16GB Click an image to Enlarge Description Payment Shipping Policy Return & Warranty Reply Feedback FAQ Introductions: Never worry about the fragmentized or broken LCD touch screen of your iPod touch 5 anymore! Here we have a great recommendation for you to make a replacement from stem to stern! Made of high quality material, our LCD Display + Touch Digitizer Screen Asm Assembly for iPod Touch 5 delivers long-term performance and high sensitivity so that you can use it at ease. Also, the advanced technique it adopts offers you pleasant visual enjoyment and clear pictures. A perfect alternate for wrong, cracked, damaged, faulty, shattered screen! Note: Compatible with iPod Touch 5  16GB only（not compatible with 32GB/64GB) Features: 1. High quality screen for iPod touch 5 2. Each screen is tested before shipping and working 3. It is used to repair and replace your wrong, cracked, damaged, faulty, shattered screen 4. Also cure display problems, dead pixels, cracked screen, wrong color issues 5. Quality controlled and tested, 100% working good 6. The screen offers you high sensitivity and durable performance 7. Assembly LCD touch screen pressed with separate flat cable Specifications: 1. Color: Black 2. Compatible with: iPod Touch 5 16GB 3. Dimensions: (12.2 x 5.6)cm / (4.8 x 2.2)" (L x W) 4. Weight: 0.95 oz / 27 g Package Includes: 1 x LCD Screen Asm Assembly for iPod Touch 5 1 X Screen protector 1 X touch pen 1 X Tools Apple, iPhone®, iPad®, iPod® are registered trademarks of Apple, Inc. Apple does not endorse use of these products. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Payment: 1.We accept PayPal only. 2.NOTE: Checkout procedure is sent to your registered email address. All payments must go through our checkout. echeck is held up to 4 days. We accept US issued credit card only. Payments are expected within 4 days. Unpaid item will be filed without receiving payment. 3. Multiple auctions purchase? Wait until all of the auctions have ended, then complete the checkout received

XD-32 OV Description Photographic array 640X480  IO voltage of 2.5V to 3.0V (internal LDO for nuclear power 1.8V)  Power work 120mW/65fpsVGAYUV  Sleep Operating temperature -20*C to 70*C  Stable operation 0*C to 50 C  Output format (8-10 bit)? YUV/YCbCr4: 2:2 RGB GRB4: 2:2 Raw RGB Data  Optical size of ° field of view  The maximum rate of 60fps VGA Chen  Sensitivity 3V / (Lux-sec)  50 dB SNR  60 dB dynamic range  View Mode Progressive  E-1 line to 510 line exposure  6.0μm x 6.0μm pixel size  Dark Current 40mV/s at 60*C  VCC ----- input supply voltage (recommended 3.3,5 V can also be, but is not recommended)  GDN ----- ground point  SIO_C --- SCCB interface control clock (Note: some of the low-level microcontroller needs pull-up control, and the I2C interface similar)  SIO_D --- SCCB interface serial data input (output) end (Note: some of the low-level microcontroller needs pull-up control, and the I2C interface similar)  VSYNC --- frame synchronizing signal (output signal)  HREF ---- line synchronizing signal (output signal)  The PCLK ---- pixel clock (output signals)  D0-D7 --- data port (output signal)  RESTE --- reset port (normal use pulled)  PWDN ---- power selection mode (normal use pull down)  OV image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. SCCB bus control, you can output the entire frame, sub-sampled, take the window way affect data resolution 8. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can be programmed through the SCCB interface.  ● High sensitivity for low-light applications  ● Low voltage suitable for embedded applications  ● standard SCCB interface compatible with I2C interface  ● RawRGB RGB (GRB4: 2:2, RGB), YUV (4:2:2) and YCbCr (4:2:2) output format  ● Support VGA, CIF, and from CIF to 40x30 of various sizes  ● VarioPixel subsampling  ● automatically affect the control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM  ● ISP has to eliminate noise and dead pixel compensation function  ● support for image scaling  ● The lens is the loss of light compensation  ● Hz automatic detection  ● saturation automatically adjust (UV adjustment)  ● edge enhancement automatically adjust  ● Noise Reduction automatically adjust Package Info 1 Pc X OV Camera Module 640x480 Display Active SCCB Compatible I2C High sensitivity Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Blue 1.3" inch SPI 128 x 64 OLED display module with CS pin   Fully working Software Code included with English Font   Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with Arduino, AVR, PIC, 51 series, MSP, STM, CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:128 x 64 Module Size:35.5mm x 33.5mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include:   ·       1 x   1.3” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

BRAND NEW BELFAN MINI DISPLAY MAIL TO DISPLAY MAIL CABLE 1.2M CABLE     BRAND NEW BELFAN Displayport to male Mini Displayport cable is the perfect solution for hooking up your PC or Displayport equipped computer to an Apple Cinema MINI Display.  This is a great solution because they are the same technology, as such you have no compromise as far as resolution or signal quality.  We have also received feedback from our customers telling us that it works with the Apple Mini Displayport to Dual Link DVI Adapter to produce the full resolution on the Apple Cinema Display with DVI input! Cable is compatible with Apple mini-displayport products and will be in Black color. Please note, because this is a new cable it has not been tested on every possible configuration of PC to Apple Display.  Specification: MOST IMORTANT Kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.     Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

                                                                                                                                                                                                                                                          BRAND NEW BELFAN MINI DISPLAY MAIL TO DISPLAY MAIL CABLE 1.2M CABLE     BRAND NEW BELFAN Displayport to male Mini Displayport cable is the perfect solution for hooking up your PC or Displayport equipped computer to an Apple Cinema MINI Display.  This is a great solution because they are the same technology, as such you have no compromise as far as resolution or signal quality.  We have also received feedback from our customers telling us that it works with the Apple Mini Displayport to Dual Link DVI Adapter to produce the full resolution on the Apple Cinema Display with DVI input! Cable is compatible with Apple mini-displayport products and will be in Black color. Please note, because this is a new cable it has not been tested on every possible configuration of PC to Apple Display.  Kindly mention your Complete Address with   landmark and the Pin Code with Mobile and   Landline Contact Numbers to help us to deliver   the product on time. No address change request   would be entertain once the order is placed.     Payment Details Payment is accepted by Paisa Pay only.   Paisa Pay is the Safest mode of Payment.

3.2'' TFT LCD Touch Shield for Arduino Mega compatible SAME DAY SHIPPING 100% TESTED PRODUCT, SATISFACTION GUARANTEED. Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Mini DisplayPort Male to  Display Port Male Cable Length: 1.8m (6 feet) This cable has been reported to have issues being used with ATI 57XX and 58XX series video cards. When contacted ATI about this problem and they have expressed that this is a known issue with their video cards and they do not plan on fixing it. Our Mini Displayport Male to Displayport Male cable is the perfect solution for hooking up your PC or Displayport equipped computer to an Apple Cinema Display. This is a great solution because they are the same technology as such you have no compromise as far as resolution or signal quality. We have also received feedback from our customers telling us that it works with the Apple Mini Displayport to Dual Link DVI Adapter to produce the full resolution on the Apple Cinema Display with DVI input! Cable is compatible with Apple mini-displayport products and will be in Black color. Please note because this is a new cable it has not been tested on every possible configuration of PC to Apple Display. If this cable does not work for your particular situation for any reason please tell us the setup that this cable failed to support and return us the cable for a full refund. Specs: 8.64 Gbit/s forward link channel supports high resolution monitors up to x with single cable. 8B/10B data transmission (up to 2.7 GHz symbol rate up to 4 lanes 8B/10B modulation) Open and extensible standard to help with broad adoption. Supports color depth of and 16 bits per component. Full bandwidth transmission (xp60) DisplayPort connector assists

belfan  Mini DisplayPort Male To Display Port Male Cable 1m  Our Displayport to Female Mini Displayport cable is the perfect solution for hooking up your PC or Displayport equipped computer to an Apple Cinema Display.  This is a great solution because they are the same technology, as such you have no compromise as far as resolution or signal quality.  We have also received feedback from our customers telling us that it works with the Apple Mini Displayport to Dual Link DVI Adapter to produce the full resolution on the Apple Cinema Display with DVI input! Cable is  compatible with Apple  mini-displayport products and will be in blue color. Please note, because this is a new cable it has not been tested on every possible configuration of PC to Apple Display.  Specification: 8.64 Gbit/s forward link channel supports high resolution monitors up to x with single cable. 8B/10B data transmission (up to 2.7 GHz symbol rate, up to 4 lanes, 8B/10B modulation) Open and extensible standard to help with broad adoption. Supports color depth of and 16 bits per component. Full bandwidth transmission (xp60) DisplayPort connector assists

3.2'' TFT LCD Touch Shield for Arduino Mega compatible     Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Specifications DC Voltage           200mV / V DC Current           200uA / 2mA /20mA/ 200mA / 10A Resistance           kΩ /2MΩ Special Functions              Diode Test, Audible Continuity, Data Hold,hFE Test AC Voltage      V       Be sure to add me to your favourites list ! Check out my other items ! CONTACT  US For Any Further Query or Suggestion Email Us At        SHIPPING POLICY   ▪      All items are dispatched through reputed couriers & we don't use speedpost / indiapost. ▪     Mostly products are shipped within 2-3 working day after realization of payment. ▪     Octroi & local levies, if any, will be borne by the buyer at the time of delivery.   RETURN  POLICY   ▪    NO RETURNS are accepted for this Listing Unless Item Arrives Damaged. ▪    Returns are on conditional basis, subject to seller's discretion. ▪    Returns will be accepted only after approval. Please contact us prior to returning the product. ▪    Buyer has to pay all-return postage and shipping charges. ▪    Buyer would not be entitled for a refund or a replacement if the Product that is returned shows improper       use, improper handling or physical damage; missing manuals, missing original packing, box, parts and or accessories.   FEEDBACK & DSR POLICY   ▪    Your Positive Feedback and 5 Stars DSR ratings are extremely important for us. ▪     We strive for 100% customer satisfaction and we love to leave Positive Feedbacks to our buyers. ▪     Please do leave Positive Feedback with 5 Stars

Digital Clip On MP3 Player With LCD Display Inbuilt Speaker & LED Torch M ini clip design MP3 music player Portable and mini design Come with TF card slot Supports MP3 format audio file Built-in rechargeable Li-ion battery Easy to use and operate with buttons Designed for playing your favorite music and enjoying the music freely and conveniently Supports Micro SD/T-Flash memory card & expandable up to 32GB (TF memory card NOT include) Elegant outlook, terrific present for yourself or your friends Equipped with USB 2.0 cable for recharging battery and transmitting data   Specification: Music Player: Yes, supports MP3 format Memory: Supports Micro SD/T-Flash memory card & expandable up to 32GB (TF memory card NOT include) Input: Buttons control USB Port: USB 2.0 (for file transfer and recharging) Audio Input Connector: 3.5mm jack Sideway I/O: 3.5mm connector, USB 2.0 port, TF Card slot Universal Audio Port: With universal 3.5 mm earphones jack Battery: Built-in rechargeable Li-ion battery Net Weight: 24 g / 0.85 oz Images are for reference We will dispatch whichever color is Available We kindly request you to give us the 100% positive feedback as you will be completely satisfied with the product. ·           It will help us to grow

Digital Clip On MP3 Player With LCD Display Inbuilt Speaker & LED Torch Mini clip design MP3 music player Portable and mini design Come with TF card slot Supports MP3 format audio file Built-in rechargeable Li-ion battery Easy to use and operate with buttons Designed for playing your favorite music and enjoying the music freely and conveniently Supports Micro SD/T-Flash memory card & expandable up to 32GB (TF memory card NOT include) Elegant outlook, terrific present for yourself or your friends Equipped with USB 2.0 cable for recharging battery and transmitting data   Specification: Music Player: Yes, supports MP3 format Memory: Supports Micro SD/T-Flash memory card & expandable up to 32GB (TF memory card NOT include) Input: Buttons control USB Port: USB 2.0 (for file transfer and recharging) Audio Input Connector: 3.5mm jack Sideway I/O: 3.5mm connector, USB 2.0 port, TF Card slot Universal Audio Port: With universal 3.5 mm earphones jack Battery: Built-in rechargeable Li-ion battery Net Weight: 24 g / 0.85 oz Images are for reference We will dispatch whichever color is Available We Will Ship Only Via Power Ship which is Maintained by Kindly Check the Blue Dart Website if Your Area Pincode is Serviceable http://Bluedart.com/locationfinder_domestic.html We will not Ship by Any other Courier so your order will be cancelled if it is not Serviceable by Blue dart No Negative Feedbacks will be Entertained for the Same We kindly request you to give us the 100% positive feedback as you will be completely satisfied with the product. ·           It will help us to grow

GT Hot Search: iPad mini iPhone 5 Samsung Galaxy i Samsung Bettery & Charger HTC Bettery & Charger Paymentt Shipping Policy Return & Warranty About Replies Feedback Work Time

new_dfb_templateend_display_feedback_code_window XEROX 115R00035 110 VOLT FUSER PHASER 6300/6350 /COLOR LASER PRINTER For Use In: Xerox Phaser 6300, Xerox Phaser 6350 *We have pick up available* ADIB0086GTPFQ

Display and Keypad Large blue display 1.8" Monochrome (103 x 65 pixels) Backlight colour: Blue Display colours: Monochrome Blue illuminated keypad Easy to Use Handset Sound Handset ringers: Polyphonic (16 melodies) Volume Control: 6-Step + OFF Receiver Volume: 4-Step Speakerphone: 6-Step + OFF Microphone mute Call Management Caller ID Caller ID Memory: 50 stations Call Share Conference Call with outside Line Intercom (Handset to Handset) Incoming Call Barring: 30 Voice AOH Any Key Answer Mute (Soft key) Redial Memory: 10 Handset Features Date & time display Alarm Clock Key Lock Navigation Key Call transfer Ringer Pattern: 5 tones | 10 melodies Signal strength indication Antenna: Integrated on base; Integrated on handset Name and caller ID Call log entries: 50 Phonebook: 100 names and numbers Answering machine Features Plug & Play answering machine Recording time capacity: Up to 20 mins Call Screening Remote Operation from Outside (DTMF) Toll Saver Base functions & other facts: Eco Ideas - Standby power consumption reduced by 57 % GAP Compatible Repeater compatible Expandable up to 6 handsets Handset Locator Wall Mountable Base dimensions: 127 mm x 117 mm x 50 mm Handset dimensions: 47 mm x 25 mm x 148 mm Battery type: AAA NiMH Battery type: Rechargeable Charge time: 7 hours Mains power: AC V - 50Hz Standby Power Consumption: 0.8 W Number of batteries: 2 per handset Standby time: Up to 170 hours Talk time: Up to 18 hours Base Weight: 170 grams Handset Weight : 115 grams Range inside: up to 50 meters Range outside: up to 300 meters W ith This Logistics Partners We are Covering Insurance Of The Product All India For Our Shipments YOU CAN ENTER YOUR AREA PIN CODE TO THE BELOW MENTIONED LINKS TO CHECK WITH THE  AVAILABILITY   OF THE SERVICE AT YOUR PLACE  OR IF YOUR PIN CODE IS NOT   SERVICEABLE TO THE BELOW MENTIONED LINKS WE REQUEST YOU TO PLEASE MAIL US SO THAT WE CAN    FIND AN ALTERNATE SHIPPING OPTION TO SHIP YOUR ORDER          http://www.bluedart.com/locationfinder_domestic.html http://www.fedex.com/in/dropoff/?&lid=/Ship/Locations http://www.aramex.com http://www.dtdc.in  YOU CAN ENTER YOUR AREA PIN CODE IN  ABOVE MENTIONED LINK OCTROI IF ANY HAS TO BE BORN BY THE BUYER PLEASE NOTE: YOUR ORDER WILL BE REFUNDED THROUGH E BAY AUTOMATICALLY IF YOUR PRODUCT  IS NOT SERVICED BY ANY OF THE MENTIONED LOGISTICS PARTNERS MENTIONED ABOVE AND NO NEGATIVE FEEDBACK REGARDING THE SAME WILL BE ACCEPTED. SHIPPING PARTNER WE SHIP THROUGH  Fed Ex, BLUE  DART,  ARAMEX, AND  DTDC   COURIERS, SO PLEASE CHECK WITH THE AVAILABILITY OF THE SERVICES FOR YOUR LOCATION OR MAIL US BEFORE ORDERING THE PRODUCT OR ELSE WE WILL REFUND YOUR FULL AMOUNT THROUGH E BAY. AS NEGATIVE FEEDBACK REGARDING SERVICES ISSUE WILL NOT BE ACCEPTED. OCTROI COST IF ANY HAS TO BE BORNE BY THE BUYERS ONLY http://www.bluedart.com/locationfinder_domestic.html http://www.fedex.com/in/dropoff/?&lid=/Ship/Locations http://www.aramex.com http://www.dtdc.in  RETURNS POLICY "NO REFUND" IF IN ANY CASE YOU ARE NOT HAPPY WITH THE PRODUCT OR FACING ANY PROBLEM THEN YOU CAN RETURN THE SAME FOR REPLACEMENT WITHIN 2 WORKING DAYS WITHOUT USING AND DAMAGING THE PRODUCT AND THE COURIER COST SHOULD BE BORNE BY THE BUYERS. PAYMENTS                  Payment  is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment.                                   Contact Us           If you have any query feel free to contact us on   PH:                           OR  e-mail us on    OR can contact me through by    " Ask Seller A Question"

The Best Deal on   !!!! 50kg/110lb Hanging Digital Travel Weighing Scale Electronic Luggage Scale           Features: Brand new and high quality. Adopting high precision sensor. Strong metal hooks. Before you start weighing precaution, easily avoid airport excess baggage charge. Efficient and comfortable human engineering design. Accurate and easy to read the digital display. Convenient take down to watch. Low power hint, overload protection, to skin function. Room temperature display. Zero and tare. 0.44/" LCD digits. Capacity: 50 kg / 110 lb. Graduation: 10g/0.02 lb. Power: 1 x 3V lithium cell (CR).(included) No Back light display Specifications: Item size: mm Package size: mm Net weight: 130g Package weight: 141g                                                               Package Included: 1x LUGGAGE TRAVEL WEIGHING SCALES - 50KG 1 x User manual Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH:  +91 OR e-mail us on .digitalmall@ gmail.com OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

The Best Deal on   !!!! LUGGAGE TRAVEL WEIGHING SCALES - 50KG PORTABLE HANDHELD ELECTRONIC DIGITAL LCD           Features: Brand new and high quality. Adopting high precision sensor. Strong metal hooks. Before you start weighing precaution, easily avoid airport excess baggage charge. Efficient and comfortable human engineering design. Accurate and easy to read the digital display. Convenient take down to watch. Low power hint, overload protection, to skin function. Room temperature display. Zero and tare. 0.44/" LCD digits. Capacity: 50 kg / 110 lb. Graduation: 10g/0.02 lb. Power: 1 x 3V lithium cell (CR).(included) No Back light display Specifications: Item size: mm Package size: mm Net weight: 130g Package weight: 141g                                                               Package Included: 1x LUGGAGE TRAVEL WEIGHING SCALES - 50KG 1 x User manual Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH:  +91 OR e-mail us on .digitalmall@ gmail.com OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere