Display interface

ALL INDIA SHIPPING Mini Display Port to DVI 24 + 5 Product Description The mini DisplayPort to DVI Adapter lets you connect a high definition monitor, projector, or LCD that uses a DVI connector  Also can be connected cable to a MacBook, MacBook Pro, or MacBook Air with a mini DisplayPort  NOTE: Adapter only works with laptops with Mini Displayport, please check with your device's output specification before placing order.  Connectors: Mini DisplayPort Male to DVI-D (Dual Link) Female  Attention: Insert / Extract cable gently. The mini DisplayPort to DVI Adapter lets you connect a high definition monitor, projector, or LCD that uses a DVI connector or cable to a MacBook, MacBook Pro, or MacBook Air with a mini DisplayPort Adapts your new Mini-DisplayPort equipped laptop to your current display Mini-DisplayPort is a miniaturized version of DisplayPort used by Apple, the newest digital display interface developed by the Video Electronics Standards Association (VESA). Connect your new laptop to the current standards of VGA Supports Mini DisplayPort 1.1a input and DVI output Supports DVI highest video resolution p Supports DVI 225 MHz / 2.25 Gbps per channel (6.75Gbps all channel) bandwidth Supports DVI 12 bit per channel (36 bit all channel) deep color Powered by Mini DisplayPort source Connectors: Mini DisplayPort Male to DVI-D (Dual Link) Female Package Includes:1 x Mini Displayport to DVI adapter for apple MacBook Operation: Connect MiniDisplayPort side to MacBook MiniDisplayport interface. Connect DVI cable from HDTV or other display to the DVI Side of the short cable. Turn on the power of Sink device and then the power of source device

Mini DP Display Port To HDMI                               Female Adapter Cable                                            For                                         Air iMac                                   Mac Macbook Pro   SUPER HIGH QUALITY FULL HD  Adapter cable features a Mini DisplayPort connector and a female HDMI connector Compatible with Mac laptops that use a Mini DisplayPort port for video output Some source devices allows audio output through the Mini DisplayPort Five-inch cable length (13 centimeters) Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). Most newer Macbook series laptops come equipped with the Mini DisplayPort interface for external video displays. Check your laptop to make sure it has the Mini DisplayPort connection. This five-inch adapter is for use with a standard HDMI cable (male to male). Connect the cable to your machine using the adapter, then connect to an external monitor or other display device with HDMI input jacks, and you're all set.     We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue            Contact Us on  - +91                                      thank u.  

Mini DP Display Port To HDMI  Female Adapter Cable                                     For                                Air iMac                          Mac Macbook Pro SUPER HIGH QUALITY FULL HD Adapter cable features a Mini DisplayPort connector and a female HDMI connector Compatible with Mac laptops that use a Mini DisplayPort port for video output Five-inch cable length (13 centimeters) Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). Most newer Macbook series laptops come equipped with the Mini DisplayPort interface for external video displays. Check your laptop to make sure it has the Mini DisplayPort connection. This five-inch adapter is for use with a standard HDMI cable (male to male). Connect the cable to your machine using the adapter, then connect to an external monitor or other display device with HDMI input jacks, and you're all set.     Kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.     Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

Mini DP Display Port To HDMI                                       Female Adapter Cable                                                    For                                                 Air iMac                                          Mac Macbook Pro SUPER HIGH QUALITY FULL HD Adapter cable features a Mini DisplayPort connector and a female HDMI connector Compatible with Mac laptops that use a Mini DisplayPort port for video output Some source devices allows audio output through the Mini DisplayPort Five-inch cable length (13 centimeters) Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). Most newer Macbook series laptops come equipped with the Mini DisplayPort interface for external video displays. Check your laptop to make sure it has the Mini DisplayPort connection. This five-inch adapter is for use with a standard HDMI cable (male to male). Connect the cable to your machine using the adapter, then connect to an external monitor or other display device with HDMI input jacks, and you're all set.     We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue.                                                                                                                     OR CALL                   Contact Us on - +91   Kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.     Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

Interface: SPI   GND: Power Gound VCC: 2.2V-5.5V SCL: CLK clock (High level 2.2V-5.5V) SDA: MOSI data (High level 2.2V-5.5V) RST: MOSI data (High level 2.2V-5.5V) D/C: Data/Command (High level 2.2V-5.5V)   Feature:   Color: Blue Resolution: 128x64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30°C to 70°C Dimension: x 27.1 mm (LW) Compatible with 3.3V and 5V control chip I / O level OLED internal drive chip: SSD136   Package included:   1 x White SPI OLED display

OLED 0.96" I2C IIC SPI Serial 128X64 WHITE Display LCD LED Module for Arduino What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306     Note: This item come I2C/IIC interface only. Because the hardware reasons, resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software...... published here for the Arduino library file, you can make this OLED module used in the Arduino system. Download File description:- IIC_without_ACK.cpp - SSD1306 drivers; IIC_without_ACK.h - SSD1306 driver file header; oledfont.c - matrix table (you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file, modulo the way " common cathode - out line - Reverse Output"; font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips). Function:- Write_IIC_Byte (unsigned char IIC_Byte); / / by IIC write an 8-bit data (such as 0xff) Write_IIC_Command (unsigned char IIC_Command); / / write command to the OLED module through IIC bus Begin_IIC_Data (); / / write data through the IIC bus open ready (which would allow a group of data transmission is complete and then turn off IIC, can greatly speed) IIC_SetPos (unsigned char x, unsigned char y); / / Set the starting point coordinates (x range 0 ~ 128, y ranges from 0 to 7) Fill_Screen (unsigned char fill_Data); / / Fill_Screen (0xff) - Full screen lit; Fill_Screen (0 × 00) - Full screen off (can be used to clear the screen) Char_F6x8 (unsigned char x, unsigned char y, const char ch []); / / display the ASCII character 6 × 8 Char_F8x16 (unsigned char x, unsigned char y, const char ch []);/ / display the ASCII character 8 × 16 CN_F16x16 (unsigned char x, unsigned char y, unsigned char N); / / display of 16 × 16 characters (this can be considered for the first time on the Arduino platform to achieve the display of Chinese characters) Draw_BMP (unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, const char BMP []); / / display BMP images of 128 × 64 The other functions is functional function. Usage: Please "IIC_without_ACK" folder to x: / arduino-1.5.5 / libraries directory, restart the Arduino IDE; Demo_IIC is based on the Arduino UNO sample program...... correct wiring and run.   Package Included: 1PCS * New  white 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

IIC/I2C/TWI Serial Interface Board Module Port For Arduino LCD Display IIC/I2C/TWI Serial Interface Board Module Port For Arduino LCD Display Features Supply voltage: 5V the backlight and contrast is adjusted by potentiometer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for LCD This is another great IIC/I2C/TWI/SPI Serial Interface With this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices

IIC/I2C/TWI/SPI Serial Interface Board Module Port For Arduino LCD Display IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) Please contact us for any doubt.Please give us positive feed back.Your feed back is very important for us. Happy to help you.We shipped our material within 2 working days after getting confirmation of payment. contact us- Mob:-     (From 10 AM to 9 PM)    Powered by Turbo Lister

XD-32 OV Description Photographic array 640X480  IO voltage of 2.5V to 3.0V (internal LDO for nuclear power 1.8V)  Power work 120mW/65fpsVGAYUV  Sleep Operating temperature -20*C to 70*C  Stable operation 0*C to 50 C  Output format (8-10 bit)? YUV/YCbCr4: 2:2 RGB GRB4: 2:2 Raw RGB Data  Optical size of ° field of view  The maximum rate of 60fps VGA Chen  Sensitivity 3V / (Lux-sec)  50 dB SNR  60 dB dynamic range  View Mode Progressive  E-1 line to 510 line exposure  6.0μm x 6.0μm pixel size  Dark Current 40mV/s at 60*C  VCC ----- input supply voltage (recommended 3.3,5 V can also be, but is not recommended)  GDN ----- ground point  SIO_C --- SCCB interface control clock (Note: some of the low-level microcontroller needs pull-up control, and the I2C interface similar)  SIO_D --- SCCB interface serial data input (output) end (Note: some of the low-level microcontroller needs pull-up control, and the I2C interface similar)  VSYNC --- frame synchronizing signal (output signal)  HREF ---- line synchronizing signal (output signal)  The PCLK ---- pixel clock (output signals)  D0-D7 --- data port (output signal)  RESTE --- reset port (normal use pulled)  PWDN ---- power selection mode (normal use pull down)  OV image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. SCCB bus control, you can output the entire frame, sub-sampled, take the window way affect data resolution 8. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can be programmed through the SCCB interface.  ● High sensitivity for low-light applications  ● Low voltage suitable for embedded applications  ● standard SCCB interface compatible with I2C interface  ● RawRGB RGB (GRB4: 2:2, RGB), YUV (4:2:2) and YCbCr (4:2:2) output format  ● Support VGA, CIF, and from CIF to 40x30 of various sizes  ● VarioPixel subsampling  ● automatically affect the control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM  ● ISP has to eliminate noise and dead pixel compensation function  ● support for image scaling  ● The lens is the loss of light compensation  ● Hz automatic detection  ● saturation automatically adjust (UV adjustment)  ● edge enhancement automatically adjust  ● Noise Reduction automatically adjust Package Info 1 Pc X OV Camera Module 640x480 Display Active SCCB Compatible I2C High sensitivity Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max)

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

C&E CNE Mini Display Port to HDMI Adapter for Apple MacBook Pro Air Mac mini and iMac with Audio Support 5 Pack. It allows you to connect a computer with a Mini Display Port output to a display with an HDMI interface. It is compatible with Apple computers that feature a Mini Display Port output. Features: Supports Mini Display Port 1.1a input to HDMI 1.3b output Support HDMI highest video resolution pSupport HDMI 225MHz 2.25Gbps per channel (6.75Gbps all channel) bandwidth Support HDMI 12bit per channel (36bit all channel) deep color Supports uncompressed audio such as LPCM Powered from Mini Display Port source Compatible with: MacBook Pro (17-inch Mid )MacBook Pro (15-inch Mid )MacBook Pro (13-inch Mid )MacBook (13-inch Late )MacBook (13-inch Aluminum Late )MacBook Pro (13-inch Mid )MacBook Pro (15-inch 2.53 GHz Mid )MacBook Pro (15-inch Mid )MacBook Pro (15-inch Late )MacBook Pro (17-inch Mid )MacBook Pro (17-inch Early )MacBook Air (Mid )MacBook Air (Late )Mac mini (Late )Mac mini (Early )iMac (Late )iMac (Mid )iMac (Early )Mac Pro (Early )Note: Before order it please check your MAC book s connector whether it include mini Display Port interface. If you re not sure please check with the manufacturer. Cables Etc. LLC is the owner of the trademark C E. This UPC is trademarked under C E. Any violation will be reported to Amazon without any prior warning. Cables Etc. LLC is the owner of the trademark C E. This UPC is trademarked under C E. Any violation will be reported to Amazon without any prior warning.

Item specifics Product Description Specification: Note: 1. /"LIGHT/" linked with GND, the backlight to be lit. 2. Need you to compress the screen and PCB tighter, might got loose after the delivery. 3 Use a 3.3V controller, otherwise the display could be quite vague. LCD Module:   Power supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested? Data interface level:2.7-5V? Backlight power supply voltage:highest 3.3V? Module size:43.6mm x 43.1mm(width X height)? Installation diameter:2mm? Backlight:White Document for Download:Data 1RST--------- reset? 2CE------------chip selection? 3DC-----------data/commands choice? 4DIN-----------serial data line? 5CLK------------serial Clock Spee 63.3V------------VCC? 7LIGHT--------- backlight control terminal? 8GND-----------power negative Features: 84 X 84 dot matrix LCD,can show 4 lines of characters Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small Low power supply,the working current

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

3.2'' TFT LCD Touch Shield for Arduino Mega compatible SAME DAY SHIPPING 100% TESTED PRODUCT, SATISFACTION GUARANTEED. Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

3.2'' TFT LCD Touch Shield for Arduino Mega compatible     Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

5V DC 20 x 4 Lines ASCII Character HD LCD Display With YELLOW Backlight   (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL   Product Overview Product Description: o     LCD display module with  YELLOW Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display YELLOW Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

5V DC 20 x 4 Lines ASCII Character HD LCD Display With BLUE Backlight (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL   Product Overview Product Description: o     LCD display module with  BLUE Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display BLUE Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

5V DC 20 x 4 Lines ASCII Character HD LCD Display With YELLOW Backlight Product Overview Product Description: o     LCD display module with  YELLOW Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display YELLOW Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

3.2'' TFT LCD touch screen display for arduino with technical support With working software code for arduino and AVR Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm

2.8 inch TFT LCD touch screen Display ILI x 320 with SD card socket   2.8” LCD TFT display with working arduino code   Description:   This 2.8" TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and flash reader design. It is a powerful and multifunctional module for your project. The screen include a controller ILI, it's a support 8/16bit data interface, easy to drive by many MCU like arduino families.STM32, AVR and . It is designed with a touch controller

Description：   84 X 84 dot matrix LCD,can show 4 lines of characters   Power supply voltage:2.7V-3.3V   Data interface level:2.7-5V   Backlight power supply voltage:highest 3.3V   Module size:43.6mm(width) x 43.1mm(length)   Installation diameter:2mm Pin Definition:   1.RST--------- reset   2.CE---------- chip selection   3.DC---------- data/commands choice   4.DIN--------- serial data line   5.CLK--------- serial Clock Speed   6.3.3V-------- VCC   7.LIGHT------- backlight control terminal   8.GND--------- power negative 3.Features: 1>. 84 X 84 dot matrix LCD,can show 4 lines of characters 2>. Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the arduino,AVR,PIC,STM32,STC MSP430 and so on.Transfer rate up to 4Mbps,can full speed write display data without waiting time. 3>. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. 4>. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small 5>. Low power supply,the working current

Product Description This Wifi Display dongle receiver applies to Projector/LC D/LED with HDMI interface sharing picture/video/music and mirroring of Apple devices, Android smartph o nes, tablet PCs, Laptop/Notebook, etc. It supports DLNA, MiraCast, EZCast, EZair protocol. Enjoy yo ur video on the big screen! Wireless HDMI Multi-media content Sharing or Screen Mirroring on Projectors/LCD/LED Features: A2W is the most innovative cast dongle of sharing streaming media, by means of Wifi connection, operation interface of smart phone, tablet, PC can be mirrored to big screen of HDTV, to achieve the best DLNA function. A2W could cast all your photos, music, movie and 3D MSG from your smart phone onto HDTV.   Main Function: 1. EZAir: The EZAir function of A2W is similar with the Airplay function of Apple, you could cast movies, photos, music from you iPhone, iPad, or iPod touch to HDTV with big screen entirely. 2. EZCast The EZCast function of A2W, allows streaming media and also mirror screen from computer or other equipments being cast by wifi onto TV. Includes streaming media like Music, Photos, TXT etc.. Users also could mirror complete screen of Laptop and use his LCD as sole Monitor Screen of Laptop. 3. Miracast The Miracast function of A2W, allows users mirrored the whole interface of Android mobile Phone, Tablet onto HDTV with big screen. When playing 3D MSG(Motion Sensing Game), you could use the tablet as the game control, and enjoy it with the big TV screen. 4. DLNA The DLNA function of A2W, support users sharing music, photos and video on their personal device, like laptop, camera, portable device, mobile phone, with friends by wifi connection on TV. More sharing from famous online video website like Tencent, Sohu, PPTV etc..   Supported Operation System 1. Android OS:Android4.0 or above 2. IOS OS:IOS6 or above 3. MAC OS:Mac. WINDOWS XP, / Supported Devices: 1.Apple:iPhone/iPad 2.Samsung:galaxy S3/S4/Note2/Note3,galaxy Tab 3.Sony:Z Series 4.LG:Optimus G 5.Xiaomi:2/2A/2S/3 6.Other phone 7.All Windows/Macs Laptop. Note: Miracast function can’t be compatible with products that without HDCP TX/RX certificate Each A2W Phone Cast Dongle has intergrated HDCP TX and HDCP RX key, which ensure A2W to be compatible with miracast function of every brand mobile phone and pad.   Plug

Feature ERMSYG-6 is lcd module ks, RoHS, -20°C to +70°C 6:00, Neg Voltage Generator,Parallel and Serial Interface,ST Controller,Popular Size Attribute Gross Weight (kg) Manufacturer EastRising Series Number ERM Part Number(Order Number) ERMSYG-6 Connection Pin Header Display Format 128x64 Dots Sunlight Readable Yes Touch Panel Optional No Outline Dimension 93.0(W)x70.0(H)x12.5(T)mm Visual Area xmm Active Area (W)x(H) Character Size No Diagonal Size 2.9” Dot (Pixel) Size 0.48x0.48mm Dot Pitch 0.52x0.52mm IC Package COB IC or Equivalent ST Interface -bit Parallel, -bit Parallel, 3-Wire Serial SPI Display Type STN-LCD Yellow Green Response Time(Typ) No Contrast Ratio(Typ) No Colors No Viewing Direction 6:00 Viewing Angle Range No Appearance Dark Blue on Yellow Green Brightness(Typ) No Backlight Color Yellow Green Color Backlight Current (Typ) 60mA Power Supply(Typ) 3.3V Supply Current for LCM(Max) 6mA Operating Temperature -℃ Storage Temperature -℃

3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT    transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm

The Best Deal on   !!!!   HIGH QUALITY USB 3.0 TO VGA DISPLAY ADAPTER       PRODUCT INFORMATION: The USB3.0-VGA Display Adapter enables you to connect additional display devices  (CRT/LCD monitor, projector)  to your desktop or notebook pc. The connected display can act as  mirrored  or extended desktop of the main display on your pc.The  flexibility  of the common USB 3.0 technology saves the need to open the computer or struggling with  compatibility  issues related to the VGA card Specifications:   It supports up to six simultaneous displays, including widescreen displays, extending your desktop and your horizons, and each one can works for different using. windows 7/8  FEATURES: * USB 3.0 specification compliant  * Support analog video output interface D-SUB (VGA)  * Supports graphics display resolution  * UGA x (standard screen)  * WSXGA+ x and x (wide screen)  * Supports multiple display modes: Primary, Extended, Mirror  *identify monitor *display rotation  *multi-display control panel Color: Randomly I N THE PACKAGE: 1 x USB3.0-VGA display adapter User Manual 1x Driver/Manual CD Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH: +91 OR e-mail us on .digitalmall@ gmail.com OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

MAX LED Module 8-Digit 7 Segment Digital LED Display Tube For Arduino MCU MAX Digital Tube Display Module MAX is a kind of integrated serial input/output common cathode display driver, it connects microprocessor and 8 digit 7 period of digital LED display, also can be connected to the bar graph display or 64 independent LED. It includes a piece of type B BCD coder, multiple scanning circuit, period of word drive, but also an 8 * 8 static RAM used to store every data. Only an external register used to set each LED segment current. A convenient four wire serial interface can connection all general microprocessor. Each data can be addressed

Technical specification Items Description Host Interface USB 3.0 Video Interface DVI / VGA Connectors Video output: DVI HDDE 30pin female connector Host upstream link: USB3.0 Micro B Type Connector Connectivity Up to 6 adapters on a computer RAM 512Mb DDR2 SDRAM Power Mode Bus powered Power Consumption Operating Power: 340 mA Supported OS Windows 8 / 8.1, Windows 7, Windows Vista, Windows XP Supported Modes Extended Desktop, Mirrored Desktop, Primary Display Housing Material: ABS (Plastic) Color: White Size: 84.5 (L) x 55.5 (W) x 18 (H) mm Working Environment Operation temperature: 10°C ~ 40°C Storage temperature: -20°C ~ 70°C Relative Humidity: Compliance CE, FCC

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem