Driver drive t board

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.

Wireless 4 Channel Robot Control Kit With Dual DC Motor Drive 433Mhz RF  Best Quality @ Lowest Price Control your robot from remote using this 4 channel wireless remote control kit. Kit comes with one 4 channel wireless transmitter with push buttons on-board for sending commands to receiver unit to control the robot. Receiver unit comes with on-board L293D bidirectional dual DC motor driver. Simply Connect 9V battery to Transmitter and proper power source to receiver, connect two DC motors on receiver module and you are ready to control your two or four wheel drive robot within few minutes. You can easily control your robot reverse, forward, left & right. Description Transmitter Input Supply: 9V Battery Receiver Power Supply: 9 - 15 V DC through Battery OR Power Adapter DC Motor Output Channel: 2  Output Current Per Channel: 600 mA (Can Easily drive BO Motors OR Plastic Gear Robotic Motors) Address Selection: 8 BIT On-board DIP Switch RF Frequency: 433Mhz USE: Indoor & Outdoor Applications  Robot Controller, Wireless Remote Controller, Wireless Switching, Wireless Dual DC Motor Drive, DIY Robotic Kits:Package Includes: 1 X 4 Channel Wireless Transmitter 1 X 4 Channel Wireless Receiver With On-board Dual DC Motor Driver 1 X 9V Battery Clip (9V Battery Is not Included) For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller,

THIS L293D DRIVER MODULE IS A MEDIUM POWER MOTOR DRIVER PERFECT FOR DRIVING DC MOTORS AND STEPPER MOTORS. IT USES THE POPULAR L293D MOTOR DRIVER IC. IT CAN DRIVE 4 DC MOTORS IN ONE DIRECTION, OR DRIVE 2 DC MOTORS IN BOTH THE DIRECTIONS. FEATURES AND USAGE L293D motor driver IC. Male burg stick connectors for supply, ground and input connection Screw terminal connectors for easy motor connection This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontroller, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms

Asus P5QPL-AM LGA 775 Socket DG41 Motherboard Support DDR2 RAM Intel® Core™2 Duo Processor EM Cache, 2.66 GHz, MHz FSB)  2GB DDR2 RAM (1+1=2GB) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board: https://www.asus.com/Motherboards/P5QPLAM/ CPU Intel® Socket 775 Core™2 Quad/Core™2 Extreme/Core™2 Duo/Pentium® dual-core/Celeron® dual-core /Celeron® Processors  Compatible with Intel® 05B/05A/06 processors Support Intel® 45nm Multi-Core CPU *Refer to www.asus.com for Intel CPU support list  Chipset Intel® G41 /ICH7 Front Side Bus MHz Memory 2 x240-pin DIMM, Max. 8 GB, DDR(O.C.)/ Non-ECC,Un-buffered Memory Dual Channel memory architecture ** Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  *** When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI Support PCIe 1.1 Architecture  VGA Integrated Intel Graphics Media Accelerator (Intel® GMA X)  - Supports Microsoft® DirectX 10, OpenGL 2.1  - Supports RGB with max. resolution x Hz Storage Southbridge   1 xUltraDMA xSATA 3 Gb/s ports LAN Qualcomm Atheros Gb LAN Audio High Definition Audio 6-Channel CODEC  Supports Jack-detect and Multi-Streaming teconologies  Supports S/PDIF out interface USB 8 USB ports (4 ports at mid-board, 4 ports at back panel)  Overclocking Features SFS (Stepless Frequency Selection) - FSB tuning from 200MHz to 800MHz at 1MHz increment  Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) Special Features ASUS MyLogo 2  ASUS EZ Flash 2  ASUS CrashFree BIOS 3  ASUS Q-Fan  Turbo Key  AI NET2 Back Panel I/O Ports 1 x D-Sub  1 x Parallel port  1 x PS/2 Mouse  1 x PS/2 Keyboard  1 x LAN(RJ45) port(s)  4 x USB x COM port  6 -Channel Audio I/O  Internal I/O Connectors 2 x USB connectors support additional 4 USB 2.0 ports  1 x IDE connector  4 x SATA connectors  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  System Panel  1 x Internal Speaker connector  1 x CD audio-in connector  24-pin EATX power connector  4-pin ATX 12V Power connector  BIOS 8 Mb Flash ROM AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI2.0, SMBIOS 2.5  Accessories User's manual 1 x I/O Shield  1 x UltraDMA cable  1 x SATA cable(s)  * Note: The floppy disk drive cable is purchased separately Support Disc Drivers ASUS PC Probe II  Anti-virus software (OEM version) ASUS LiveUpdate Utility Intel IT Director  Form Factor uATX Form Factor  9.6 inch x 7.6 inch (24.4 cm x 19.3 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5QPL-AM DG41 Motherboard LGA775 Socket Support DDR 2RAM Intel® Pentium® Processor EM Cache, 2.00 GHz, 800 MHz FSB) DDR2 2GB RAM (1+1=2GB) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board: https://www.asus.com/Motherboards/P5QPLAM/ CPU Intel® Socket 775 Core™2 Quad/Core™2 Extreme/Core™2 Duo/Pentium® dual-core/Celeron® dual-core /Celeron® Processors  Compatible with Intel® 05B/05A/06 processors Support Intel® 45nm Multi-Core CPU *Refer to www.asus.com for Intel CPU support list  Chipset Intel® G41 /ICH7 Front Side Bus MHz Memory 2 x240-pin DIMM, Max. 8 GB, DDR(O.C.)/ Non-ECC,Un-buffered Memory Dual Channel memory architecture ** Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  *** When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI Support PCIe 1.1 Architecture  VGA Integrated Intel Graphics Media Accelerator (Intel® GMA X)  - Supports Microsoft® DirectX 10, OpenGL 2.1  - Supports RGB with max. resolution x Hz Storage Southbridge   1 xUltraDMA xSATA 3 Gb/s ports LAN Qualcomm Atheros Gb LAN Audio High Definition Audio 6-Channel CODEC  Supports Jack-detect and Multi-Streaming teconologies  Supports S/PDIF out interface USB 8 USB ports (4 ports at mid-board, 4 ports at back panel)  Overclocking Features SFS (Stepless Frequency Selection) - FSB tuning from 200MHz to 800MHz at 1MHz increment  Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) Special Features ASUS MyLogo 2  ASUS EZ Flash 2  ASUS CrashFree BIOS 3  ASUS Q-Fan  Turbo Key  AI NET2 Back Panel I/O Ports 1 x D-Sub  1 x Parallel port  1 x PS/2 Mouse  1 x PS/2 Keyboard  1 x LAN(RJ45) port(s)  4 x USB x COM port  6 -Channel Audio I/O  Internal I/O Connectors 2 x USB connectors support additional 4 USB 2.0 ports  1 x IDE connector  4 x SATA connectors  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  System Panel  1 x Internal Speaker connector  1 x CD audio-in connector  24-pin EATX power connector  4-pin ATX 12V Power connector  BIOS 8 Mb Flash ROM AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI2.0, SMBIOS 2.5  Accessories User's manual 1 x I/O Shield  1 x UltraDMA cable  1 x SATA cable(s)  * Note: The floppy disk drive cable is purchased separately Support Disc Drivers ASUS PC Probe II  Anti-virus software (OEM version) ASUS LiveUpdate Utility Intel IT Director  Form Factor uATX Form Factor  9.6 inch x 7.6 inch (24.4 cm x 19.3 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5QPL-AM DG41 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Quad Processor QM Cache, 2.66 GHz, MHz FSB) DDR2 2GB RAM (1+1=2GB) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board: https://www.asus.com/Motherboards/P5QPLAM/ CPU Intel® Socket 775 Core™2 Quad/Core™2 Extreme/Core™2 Duo/Pentium® dual-core/Celeron® dual-core /Celeron® Processors  Compatible with Intel® 05B/05A/06 processors Support Intel® 45nm Multi-Core CPU *Refer to www.asus.com for Intel CPU support list  Chipset Intel® G41 /ICH7 Front Side Bus MHz Memory 2 x240-pin DIMM, Max. 8 GB, DDR(O.C.)/ Non-ECC,Un-buffered Memory Dual Channel memory architecture ** Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  *** When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI Support PCIe 1.1 Architecture  VGA Integrated Intel Graphics Media Accelerator (Intel® GMA X)  - Supports Microsoft® DirectX 10, OpenGL 2.1  - Supports RGB with max. resolution x Hz Storage Southbridge   1 xUltraDMA xSATA 3 Gb/s ports LAN Qualcomm Atheros Gb LAN Audio High Definition Audio 6-Channel CODEC  Supports Jack-detect and Multi-Streaming teconologies  Supports S/PDIF out interface USB 8 USB ports (4 ports at mid-board, 4 ports at back panel)  Overclocking Features SFS (Stepless Frequency Selection) - FSB tuning from 200MHz to 800MHz at 1MHz increment  Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) Special Features ASUS MyLogo 2  ASUS EZ Flash 2  ASUS CrashFree BIOS 3  ASUS Q-Fan  Turbo Key  AI NET2 Back Panel I/O Ports 1 x D-Sub  1 x Parallel port  1 x PS/2 Mouse  1 x PS/2 Keyboard  1 x LAN(RJ45) port(s)  4 x USB x COM port  6 -Channel Audio I/O  Internal I/O Connectors 2 x USB connectors support additional 4 USB 2.0 ports  1 x IDE connector  4 x SATA connectors  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  System Panel  1 x Internal Speaker connector  1 x CD audio-in connector  24-pin EATX power connector  4-pin ATX 12V Power connector  BIOS 8 Mb Flash ROM AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI2.0, SMBIOS 2.5  Accessories User's manual 1 x I/O Shield  1 x UltraDMA cable  1 x SATA cable(s)  * Note: The floppy disk drive cable is purchased separately Support Disc Drivers ASUS PC Probe II  Anti-virus software (OEM version) ASUS LiveUpdate Utility Intel IT Director  Form Factor uATX Form Factor  9.6 inch x 7.6 inch (24.4 cm x 19.3 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Latch and Retain mSATA SSD to 9.5mm 2.5” SATA Drive Best Solution that Convert and Easily Retain Fast Speed mSATA SSD as normally standard 2.5 inch 9.5mm height SATA Solid State Drive! FEATURES Convert Full Size mSATA SSD to 2.5” drive Form Factor Supports SATA I, SATA II and SATA III (6Gbps) 100% Compatible with 2.5” SATA drive mechanical spec 22 pin SATA (Signals and Power) male connector on board The mSATA SSD can be the primary bootable device containing the OS and application. Latch mSATA connector on board, no need the screw for the retention of mSATA SSD Transparent to the operating system and no driver required Supports any OS like Windows, Mac and Linux Includes 9.5mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws Dimension of PCBA with 2.5” frame: mm x mm x 9.5mm SSD & PCBA power from SATA 5V input Provides mSATA SSD Max 3.3V/2A power source Supports industrial operating temperature range: - ºC Fully RoHS compliant

Zebronics DG41 Combo Board LGA775 Board Support DDR2 and DDR3 RAM Intel® Pentium® Processor E5400 (2M Cache, 3.00 GHz, 800 MHz FSB) LGA 775 Socket DDR3 2GB RAM Intel Fan Back Panel is Available, No Box and No Driver CD Available Note: The board has only two RAM ports, One for DDR3 and One for DDR2   Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Bipolar stepper drive board described here has been designed around TBHG IC. The TBHG is PWM chopper type single chip bipolar sinusoidal micro-step stepping driver. Maximum Motor Load 4.5A, Suply 10V to 42V DC.   Features   Based on Single chip and Second chip for auto half current control Suitable for Nema17, Nema23, Nema34 bipolar stepper motors Suitable for 4Wires, 6 wires and 8 wires stepper motor. Forward and reverse rotations available Selectable Phase (Micro-step) drives , and 1/16 Maximum Input supply 42V DC Minimum Input supply 10V DC Output current 4.5Amps Output Fault Monitor LED indicator On Board Power LED indicator On Board step pulse input indicator Standby auto half current reduction circuitry onboard Built

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Quad Processor Q8200  (4M Cache, 2.33 GHz, 1333 MHz FSB) DDR2 2GB RAM (1+1=2GB) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Duo Processor E6850 (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR2 2GB RAM (Single Ram) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

    Other Items Feedbacks About Us Contact Us Add To Favorites   CNB353 - New Original L298N H-Bridge Motor Driver IC for DC,Stepper Motor Drive Make your own DC,Stepper motor Drive/CNC drive Circuit Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Retain mSATA SSD as 7mm 2.5” SATA Drive Best Solution that Easily Retain Fast Speed mSATA SSD as normally standard 7mm 2.5 inch SATA Solid State Drive! FEATURES Convert Full Size mSATA SSD to 2.5” Form Factor Supports SATA I, SATA II and SATA III (6Gbps) 100% Compatible with 2.5” SATA drive mechanical spec 22 pin SATA (Signals and Power) male connector on board The mSATA SSD can be the primary bootable device containing the OS and application. Transparent to the operating system and no driver required Supports any OS like Windows, Mac and Linux Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws Includes 2 mSATA screws for the retention of mSATA SSD Dimension of PCBA with 2.5” frame: mm x mm x 7mm SSD & PCBA power from SATA 5V input Provides mSATA SSD Max 3.3V/2A power source Supports industrial operating temperature range: - ºC Fully RoHS compliant

Intel® Xeon® Processor X3430 (8M Cache, 2.40 GHz) 1156 Socket Asus P7H55/USB3 LGA 1156 Socket Motherboard GSKILL 4GB DDR3 RAM RIPJAWS Intel Fan Back Panel is Available. No Box and No Driver CD Available  Note: The board has 4 RAM Slots but only 2 RAM Slots are working at the same time. 2 RAM Slots are not working. SanDisk 8GB USB Drive Free Before Purchase 31-Jan-2016 About Board: https://www.asus.com/Motherboards/P7H55USB3/ CPU, Chipset and Graphics features LGA1156 Intel® Lynnfield/Clarkdale Processor Ready This motherboard supports the latest Intel® Lynnfield and Clarkdale processors

Intel® Xeon® Processor X3430 (8M Cache, 2.40 GHz) 1156 Socket Asus P7H55/USB3 LGA 1156 Socket Motherboard 4GB DDR3 RAM 1333MHz Intel Fan Back Panel is Available. No Box and No Driver CD Available  Note: The board has 4 RAM Slots but only 2 RAM Slots are working at the same time. 2 RAM Slots are not working. SanDisk 8GB USB Drive Free Before Purchase 31-Jan-2016 About Board: https://www.asus.com/Motherboards/P7H55USB3/ CPU, Chipset and Graphics features LGA1156 Intel® Lynnfield/Clarkdale Processor Ready This motherboard supports the latest Intel® Lynnfield and Clarkdale processors

We can provide best quality Fan Driver PCB for 1KVA, 2KVA, 3KVA, 6KVA,10KVA Online UPS. These fan driver PCBs drive the fan and send its acknowledgement signals to controller PCBs for the monitoring of fan health. ->This PCB is computable with online UPS of many famous brands. Contact Us:+917228028888

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Duo Processor E6850 (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR2 2GB RAM (Single Ram) Cooler Master Fan (you will see Intel fan in listing pictures but i will give you cooler master fan) Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Quad Processor Q8400  (4M Cache, 2.66 GHz, 1333 MHz FSB) DDR2 2GB RAM (1+1=2GB) Cooler Master Fan (you will see Intel fan in listing pictures but i will give you cooler master fan) Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

New L293D motor shield, the input voltage DCV 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC  and stepping motors) and switching power transistors.To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use

Asus P8Z77-M PRO Motherboard 1155 Socket-The Gaming Motherboard Intel® Pentium® Processor G2020  (3M Cache, 2.90 GHz) 1155 Socket GSKILL 4GB DDR3 1333MHZ RIPJAWS Intel Fan No Back Panel is Available No Box and No Driver CD Available This is new and unused Motherboards with only testing warranty. SanDisk 8GB USB Drive Free Before Purchase 31-Jan-2016 About Board: https://www.asus.com/Motherboards/P8Z77M_PRO/overview/ Windows 8 Exclusive Features Fast Boot Instant OS Login ASUS has released new hardware and software designs to shorten system boot-up time to 2-seconds* for a smoother user experience that removes annoying delays under Windows 8, and even previous versions of Windows. Faster system boot and restart means Windows starts quicker and higher efficiency - No more waiting around. ASUS Boot Setting Multi-startup Options  Thanks to ASUS Windows 8 hardware optimization, ASUS Boot Setting provides better flexibility

ASUS M5A97 EVO R 2.0 AM3+ AMD 970 USB 3.0 ATX AMD Motherboard AMD Athlon II X2 270 Dual-Core 3.40 GHz Socket AM3 GSKILL 4GB DDR3 RAM RIPJAWS 1600MHz AMD Fan Back Panel is Available No Box and No Driver CD Available. This is a New and unused Refurbished Motherboard but warranty not available. SanDisk 8GB USB Drive Free Before Purchase 20-Jan-2016 About Board: https://www.asus.com/in/Motherboards/M5A97_EVO_R20/overview/ Dual Intelligent Processors 3 with New DIGI+ Power Control Dual Intelligent Processors 3 with New DIGI+ Power Control The world’s first Dual Intelligent Processors from ASUS pioneered twin onboard chips - TPU (TurboV Processing Unit) and EPU (Energy Processing Unit). Third generation Dual Intelligent Processors with New DIGI+ Power Control provides a total CPU, memory and SMART DIGI+ Key profile tuning digital power solution, which includes two digital voltage controllers allowing ultra-precise DRAM tuning

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. Aslb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one aslb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, aslb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. Aslb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. Aslb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs 1600 step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. A3967slb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one a3967slb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, a3967slb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. A3967slb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. A3967slb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged