Ds18b20 module temperature

DS18B20 Module DS18B20 Temperature Measurement Sensor Module for Arduino UNO DUE MEGA Description: 1 On board DS18B20 chip, left 3P round hole seat 2 Built-in pull-up resistor 3 On-board power indicator 4 Board size: 21 (mm) x10 (mm) Package Included: 1 * DS18B20 Module Other Product You Might be Interested

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

Description 100% brand new and high quality Using the NTC thermistor sensor, good sensitivity The comparator output signal clean waveform is good, driving ability, than 15mA Adjust the temperature distribution bit detection threshold Using a wide voltage LM393 comparator With bolt holes for easy installation Module Usage The thermal resistance of the module is very sensitive to the ambient temperature and is generally used to detect the ambient temperature Through the adjustment of the potentiometer one can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DS18B20 Programmable Resolution 1-Wire Digital Thermometer DS18B20 Programmable Resolution 1-Wire Digital Thermometer The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire® bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply. Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems. Key Features Unique 1-Wire Interface Requires Only One Port Pin for Communication Each Device has a Unique 64-Bit Serial Code Stored

DS18B20 Programmable Resolution 1-Wire Digital Thermometer The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire® bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply. Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems. Key Features ·          Unique 1-Wire Interface Requires Only One Port Pin for Communication ·          Each Device has a Unique 64-Bit Serial Code Stored

Description Package Includes: 1 Piece new  DS18B20 Temprature sensor module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  DS18B20 Temprature sensor module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

A NTC  is a type of resistor whose resistance varies significantly with temperature, Negative Temperature Coefficient (NTC) thermistor with resistance that decreases while temperature increases. Its low cost temperature sensor, the NTC thermistor is the device of choice for module temperature measurements and over temperature protection. The NTC thermistor is useful for protecting a power system from overheating or cooling systems Features     Low Cost     More sensitive response then thermocouples     High accuracy     Fast thermal response     Low cost     Small size     Epoxy encapsulated     High stability     Long life     R/T Curve-matched     Contact us for other value,  22K, 47K, 100K Applications Temperature Sensor Auto cooling systems over temperature cutoff switches Heat sink Temperature Measurement Heaters Ovens

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DESCRIPTION DHT11 Temperature Relative Humidity Sensor Module For Arduino Feature: Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: % Humidity measurement error: +/- 5% Temperature measurement range: 0 C ~ 50 C Temperature measurement error: +/- 2 C Working voltage 3.3V ~ 5V Output mode: digital output Has fixed bolt hole and easy installation PCB size: 3.1 x 1.4cm Package included: 1 x DHT11 Temperature Relative Humidity Sensor Module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Package Contents 1 x DC 3V to 5V USB Output charger Step Up Power Module Mini DC-DC Boost Converter Item specifications Brand Name:DC Converter     Size:24x18mm     Output Current:Rated 1A-1.5A     Output Power:1 - 50W     Type:DC/DC Converters     Input Voltage:1-5V     Output Voltage:V Weight:0.03g     Efficiency::Up to 96%     Switching frequency::500KHz     Output ripple::30mV (MAX) 20M bandwidth     Voltage indication::LED lights with load     Operating Temperature::Industrial (-40°c to +85°c)     Output::USB Output     Product Description - Features:         Module Properties: non-isolated step-up module (BOOST)         input voltage: 1-5V     Output voltage: V         Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)         Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)         Switching frequency: 500KHz         Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)         Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)         Operating Temperature: Industrial (-40°c to +85°c)         Full load temperature rise: 30°c         Quiescent Current: 130uA         Load regulation: ± 1%         Voltage regulation: ± 0.5%         Dynamic response speed: uS         Short circuit protection: None (Please use the lithium battery with protection.)         Input Reverse Polarity Protection: None         Connection: Welding         Input: IN + Postive, IN-Negative         Output: USB Output     Applications: Do It Yourself (DIY) make a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.    In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.    Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

DHT11 Arduino Temperature and Humidity Sensor Module + Dupont cable Description This is DHT11 sensor adopts module can detect surrounding environment of the humidity and temperature.
 Humidity measuring range: % Accuracy: +-5%  
Temperature measurement range: 0 -50℃ Accuracy: +-2 degrees 
 Supply voltage 3.3 V-5 V 
 Output digital signal Data port has pull-up resistor 
 Size: mm Package Info 1Pc X DHT11 Module Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

DHT11 Arduino Temperature and Humidity Sensor Module + Dupont cable Description This is DHT11 sensor adopts module can detect surrounding environment of the humidity and temperature.
 Humidity measuring range: % Accuracy: +-5%  
Temperature measurement range: 0 -50℃ Accuracy: +-2 degrees 
 Supply voltage 3.3 V-5 V 
 Output digital signal Data port has pull-up resistor 
 Size: mm Package Info 1Pc X DHT11 Module Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.