Fans two

Two portable fans. Company "Classic and "Vinny. one is bit old but running condition very good.

Two White Pedestal Fans 1) Orient stand Fan. 2) V-Guard stand Fan. Less used...good working condition.. Price can be negotiated Don't ask cheap rates and ignore time pass messages 9.6.7.6.7.6.1.7.8.6

Two fans, brown colour, in superb working condition for 1000 INR negotiable. Area Vaduthala Kochi

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and Transistor will further protect your micro-controller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - BC 547 Transistor used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Two Table Fans:- 1.Crompton High Flo( Wave Plus 400MM). 2.HAVELLS Hi-Speed One Pedestal Fan Crompton Torpedo. All the three fans are absolute new. They have just crossed 6 months. Working in good condition. Individual selling is also available.For that always feel free to reach out to me.

IBM Server X M N5A (TWO SOCKET – 2U RACK / Intel Xeon EV2 Hexa Core/ 2.10GHz/ 15MB Cache/ 8GB RAM/ 300GB SAS HDD/ 01 RAID/ 3 Years Onsite Warranty). FREE Shipping Across India. Features Specifications 2U Rack Intel Xeon E V2 (Hexa Core) 2.10 Ghz 15 Mb Mhz 1x 8GB RAM 1 X300GB SAS HDD 2.5" Hot Swap MULTI BURNER RAID 01in built (Me card) 3 Years Onsite + 24x7 Warranty Product Description Highlights Innovative design, optimized for performance and reliability Wide range of business-critical applications, including cloud computing, virtual desktop, and business analytics Optimized for cloud computing and virtualization Outstanding reliability, availability and serviceability (RAS) for an improved business environment Easy to deploy, integrate, service and manage Optimal performance and virtualization The versatile IBM System x M4 blends outstanding uptime and performance for business-critical workloads, including cloud computing, virtual desktop and business analytics. The powerful server offers an energy-smart and easy-to-use rack solution with a pay-as-you-grow design to help manage risks. With more computing power per watt and the latest Intel Xeon E v2 series processors, advanced memory support, and greater disk capacity for businesses requiring ample storage, the x M4 offers balanced performance and density. Additionally, as the first x86 server to achieve the TPC-C benchmark, virtualized (1 M TPM),1 the x M4 is optimized for cloud computing and virtualization applications. Outstanding uptime With redundant hot-swap fans, disks and power supplies, the x M4 provides a resilient architecture ideal for business-critical applications. Predictive Failure Analysis and light path diagnostics proactively monitor the system’s sub-components and provide advanced warning on power supplies, fans, VRMs, disks, processors and memory. Redundant hot-swap components make it easy to replace failures without taking your system down. Light path diagnostics displays a visible warning light indicator on a failing component, allowing time for component replacement prior to failure and facilitating high availability. Product features Innovative design with flexibility, performance and outstanding uptime Optimized for cost and performance, supports business-critical applications and cloud deployments Excellent RAS and outstanding uptime for an improved business environment Easy to deploy, integrate, service and manage Comprehensive systems management tools help increase uptime, reduce costs and improve productivity with advanced server management capabilities Support for GPUs, high-IOPS SSDs and 10 GbE for different types of workloads Hardware summary Dual-socket 2U rack server for expandability and high performance Up to two Intel Xeon Processor E v2 product family processors Up to 768 GB memory and up to MHz memory speed Integrated quad-port Gigabit Ethernet and optional embedded dual-port 10 GbE Up to six PCIe 3.0 expansion slots; up to four optional PCI-X slots available Up to 16 TB of 1.8-inch hot-swap SSDs or 25.6 TB of 2.5-inch hot-swap SAS/SATA/SSDs or 24 TB of 3.5-inch hot-swap or simple-swap SAS/SATA HDDs Embedded 6 Gbps hardware RAID- and optional RAID-5, -50 or -6, -60. Optional support for new 12 Gbps RAID controller. Hot-swap disk/fan/power supply, two fan zones with N+1 fans design, light path diagnostics and Predictive Failure Analysis, better thermal design, balanced efficiency, uptime and serviceability

Best Quality Remote Control Switch For Five Lights And Two Fans One Extra Plug Controlled With Manual Switch With One Year Warranty Only @ ₹318/- Per Switch point - Compare this price factor with all other brands

Best Quality Remote Control Switch For Five Lights And Two Fans With Great 42% Discounted Price + One Year Warranty MRP is ₹/- Only @ ₹307/- Per Switch point - Compare this price factor with all other brands

Best Quality Remote Control Switch For Five Lights And Two Fans One Extra Plug Controlled With Manual Switch With One Year Warranty Home automation is latest trend

Best Quality Remote Control Switch For Five Lights And Two Fans With Great 42% Discounted Price + One Year Warranty MRP is ₹/- Home automation is latest trend

AntMiner S3 is the third generation Bitcoin mining rig made by Bitmain. It uses the state of the art BM chip powered by the 28nm tech process with ultra-low power consumption, targeting the best combination of power efficiency and low capital expenditure for mining investors.   Specifications: Hash Rate: 441 GH/s±5% Power Consumption: 340 Watt at the wall Power Efficiency: 0.77 J/GH on wall Power Supply: 12V DC Size:  331 mm x 137 mm x 160 mm Fans: Two fans mounted on both front and back ends. Operating Temperature: 0 °C to 35 °C Complied with: FCC / CE Network Connection: Ethernet   Features: Stand alone:   The S3 mines stand alone, needs no proxy server. Quiet:  The customized heat sinks mounted to the hash boards, one box over S3 to control the air flow, two fans mounted on both front and back ends that mean fans are able to work at lower speed to dissipate all heat easily. This design let S3 run at much lower noise level. Stable:  Running 24 hours a day with minimal downtime. Accurate:   Hardware Error got from the sample unit rate is as low as 0.01%, hundreds times better than some competing products. Efficient:   High energy efficiency to save your investment on PSU and electricity bills. Power Supply Specifics: Output Type:  Triple Output Power:  w Customized:  Yes Brand Name:  Antminer Input Voltage:  220V Output Current:  30A Output Voltage:  +12v Output Frequency:  360

IBM P5 520 9131-52A Sever IBM P5 520 9131-52A Server Specification: 64-bit scalability in a 1-core, 2-core, or 4-core configuration Powerful, symmetric multiprocessing (SMP), server Deskside or rack-mount configuration Up to 32 GB of memory Up to 2400 GB of internal disk storage IBM P5 520 9131-52A Server Six expansion slots: Three hot-swap 133 MHz 64-bit PCI-X slots Two hot-swap 66 MHz 32-bit PCI-X slots One hot-swap DDR 266 MHz 64-bit PCI-X slot One GX slot Service Processor Two 10/100/1000 Ethernet Ports IDE controller for connection to internal optical devices Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter Two system ports and two USB ports Two HMC/UPC ports and two SPCN ports Hot-swap power and cooling Redundant cooling IBM System p5 520 and System p5 520Q IBM P5 520 9131-52A Server Summary of standard features: Deskside or rack-mount (4U) configurations 1-core, 2-core, and 4-core SMP design (one processor card) p5-520 -- 1-core 1.65 GHz with no L3 cache p5-520 -- 2-core 1.65 GHz with 36 MB L3 cache p5-520 -- 2-core 1.9 GHz with 36 MB L3 cache p5-520 -- 1-core 2.1 GHz with 36 MB L3 cache p5-520 -- 2-core 2.1 GHz with 36 MB L3 cache p5-520Q -- 4-core 1.5 GHz with 2 36 MB L3 caches p5-520Q -- 4-core 1.65 GHz with 2 36 MB L3 caches IBM P5 520 9131-52A Server 1 GB of DDR-2 533 MHz ECC memory: Expandable to 32 GB Eight hot-swap disk drive bays -- two four packs: Four standard and four optional IBM P5 520 9131-52A Server maximum of six hot-swap PCI-X slots: Three 133 MHz 64-bit PCI-X slots One 266 MHz 64-bit PCI-X slot Two 66 MHz 32-bit PCI-X slots One 4-pack disk drive enclosure One media backplane IBM P5 520 9131-52A Server Integrated: Service Processor IDE controller for connection to internal optical devices Dual 10/100/1000 Gb Ethernet Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter One GX slot Hot-swap and redundant fans Two USB ports Two system ports Two HMC/UPC ports One Power Supply, 850 Watt AC, Hot-swap, Base (redundant power optional)

Ant Esports ICE-511MT Gaming Cabinet 1) Mesh Front Panel: The mesh front panel offers efficient airflow for demanding systems. 2) Sliding Tempered Glass Panel: Showcase your build and system lighting effect through sliding tampered glass side panel. 3) Auto-RGB Fans: All four 120mm Auto-RGB LED fans are pre-installed to create an amazing lighting effect, you can control the RGB lighting effects directly from the I/O panel 4) Excellent Thermal Performance : Optimized airflow due to the large intakes on the front panel; Additional ventilation on the top panel adds thermal support 5) Expanding The Possibilities: The spacious interior fits all standing motherboard E-ATX, ATX, Micro-ATX, Mini-ITX for your gaming need. 6) SSD Bracket :Mount extra SSD on the back side for more storage 7) Fan and Radiator Support: Front - Three 120mm or two 140mm fans and up to 360mm radiator 8)Top : Two 120mm or two 140mm fans. Rear: One 120mm fan All to ensure you don’t have to compromise on performance For Regular Update please visit:- www . saifinfosystem . in Contact:- Saif Infosystem Shop Address:- Shop No. 4, Krishna Complex, Opp. New RBI, Gandhi Bridge Corner, Income Tax, Ashram Road

Ever wanted to switch off your lights  or control the fan from your bed ?? Ever wanted your aged or sick parents to have the convenience of controlling lights and fans without moving up to the switch board ?? When your TV, Sound System or Air-conditioner can have a remote……your Light and Fan can have it too. BIG I’S Latest     Switches with   Remote     for controlling lights & fans (with advance technology) These are modular switches compatible with Crabtree Thames / Anchor Roma or similar size of Modular Plates and are easy to   install.  These  switches carry a replacement warranty of 12 months against any manufacturing defects..   Key Features: ●                 Single module Switch with Remote Control ●                 Remote & manual operation of lights & fans ●                 5 speed fan regulation ●                 Unique micro control circuitry ●                 Shock proof and energy saving ●                 Inbuilt memory ●                 Compact size and wide angle ●                 Supports existing wiring ●                 No need for two way wiring ·            LED indication   Specifications: ●                 Operating Voltage: V AC ●                 Frequency: 50Hz ●                 Load capacity of each switch: 100 Watts ●                 I/R based Remote Control ●                 Remote Control working range:40ft ●                 (depending upon battery conditions) ●                 Use two “AAA” batteries for remote control  

A 280mm radiator and dual SP140L PWM fans provide the extreme cooling you need for highly overclocked CPUs The Hydro Series H115i is an extreme performance, factory sealed, all-in-one liquid CPU cooler for cases with 280mm radiator mounts. The 280mm radiator and dual SP140L PWM fans provide the excellent cooling you need for highly overclocked CPUs. Corsair Link software control is built in, so you can monitor temperatures, adjust cooling performance and customize LED lighting directly from your desktop. 280mm dual-fan radiator The key to fast, efficient cooling is maximizing cooling surface area. If your PC case has dual 140mm fan mounts spaced for a 280mm radiator, the H115i lets you take advantage of your case’s full cooling potential. Improved coldplate and pump design Everything’s been tweaked to make the v2 line our best yet. The new design operates more efficiency for both lower temperatures and less noise. Dual SP140L PWM fans The included 140mm fans are custom-designed for high static pressure air delivery with minimum turbulence and noise. They’re PWM controlled, so you can customize the fan speed to find the optimal balance of cooling and noise. Built-in Corsair Link for monitoring, customization and control Attach the included Corsair Link cable to a USB header on your motherboard and download the free Corsair Link software to unlock even more power. You can customize cooling performance, monitor coolant and CPU temperatures, and change the color of the RGB LED lighting from the default white to match your system, or to change color based on temperature readings and other inputs. High performance CPU cooling made simple Gone are the days when watercooling required lots of work. The H115i is a closed loop, factory sealed design that comes pre-filled, and it comes with a modular, tool-free mounting bracket for faster installation. About Hydro Series Liquid CPU Coolers Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits. Contents and Specifications Package contents Hydro Series H115i Liquid CPU Cooler Mounting kit for all modern CPU sockets Two SP140L High Torque 140mm Fans USB cable for Corsair Link™ Integration Fan and radiator mounting screws Thermal compound (pre-applied) Quick Start Guide Compatibility Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011 and 2011-3 AMD™ sockets FM1, FM2, AM2, and AM3 Technical specifications Radiator dimensions: 140mm x 312mm x 26mm Fan dimensions: 140mm x 25mm Fan speed: 2000 +/- 10% RPM   Fan airflow: 104.65 CFM Fan static pressure: 3.99mm-H2O Noise level: 40 dB(A)

Item Specifics Warranty Five years Cold Plate Material Copper Fan Specification 120mm (x2) Radiator Material Aluminum Socket Support AMD: AM2, AM3, FM1, FM2, Intel LGA: 1150, 1155, 1156, 1366, 2011, 2011-3 Tubing Large-diameter, low permeability     ADVANCED FEATURES Dual SP120L PWM fans with Corsair Link monitoring and control for extreme liquid CPU cooling performance. 240mm radiator. Advanced SP120L PWM fans. Built-in Corsair Link for monitoring, customization, and control. High-performance CPU cooling made simple. Hydro Series Liquid CPU Coolers. Contents and Specifications Package contents Hydro Series H100i GTX Liquid CPU Cooler Mounting kit for all modern CPU sockets Two 120mm High Torque Fans Fan and radiator mounting screws Thermal compound (pre-applied) Technical specifications Radiator dimensions: 276mm x 125mm x 30mm Fan dimensions: 120mm x 120mm x 25mm Fan speed: 2435 +/- 10% RPM Fan airflow: 70.69 CFM Fan static pressure: 4.65 mmH2O Fan noise level: 37.7 dB(A) Compatibility Intel™ LGA 1150, 1155, 1156, 1366, 2011, 2011-3 AMD™ sockets FM1, FM2, AM2, AM3   ·         Important We are looking for your valuable 5 star positive Rating. In case you are not satisfied then please contact us before leaving negative/neutral feedback. We assure you that we will take best care to help you out. For any issues please feel free to call or sms on 9926579444                                          If Any Situation product is Return then Charges Paid By Customer.   Payment is accepted by Paisa Pay.  Paisapay is the Safest mode of Payment Customers Belongs to Assam, Meghalaya, Sikkim,   Mizoram,West Bengal, Tripura & Jammu kasmir Please Confirm us Before Placing Order. We ship anywhere

CORSAIR Hydro Series™ H100i GTX Extreme Performance Liquid CPU Cooler  WITH 5 YEAR WARRANTY Item Specifics Warranty Five years Cold Plate Material Copper Fan Specification 120mm (x2) Radiator Material Aluminum Socket Support AMD: AM2, AM3, FM1, FM2, Intel LGA: 1150, 1155, 1156, 1366, 2011, 2011-3 Tubing Large-diameter, low permeability     ADVANCED FEATURES Dual SP120L PWM fans with Corsair Link monitoring and control for extreme liquid CPU cooling performance. 240mm radiator. Advanced SP120L PWM fans. Built-in Corsair Link for monitoring, customization, and control. High-performance CPU cooling made simple. Hydro Series Liquid CPU Coolers. Contents and Specifications Package contents Hydro Series H100i GTX Liquid CPU Cooler Mounting kit for all modern CPU sockets Two 120mm High Torque Fans Fan and radiator mounting screws Thermal compound (pre-applied) Technical specifications Radiator dimensions: 276mm x 125mm x 30mm Fan dimensions: 120mm x 120mm x 25mm Fan speed: 2435 +/- 10% RPM Fan airflow: 70.69 CFM Fan static pressure: 4.65 mmH2O Fan noise level: 37.7 dB(A) Compatibility Intel™ LGA 1150, 1155, 1156, 1366, 2011, 2011-3 AMD™ sockets FM1, FM2, AM2, AM3   Warranty This product has 36 months manufacturer Warranty, it means that u don’t have to send to us for any service / repair related issues, you can go to any service center nearest at your place, they will solve the problem, and otherwise they will issue you another item if unable to repair the same

The flexible, powerful 120mm liquid CPU cooling system for high performance PCs. The Hydro Series H80i v2 is a high performance, all-in-one liquid CPU cooler that works with standard 120mm radiator mounts. The extra-thick 49mm x 120mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for high performance CPUs. It’s Corsair Link compatible, so you can customize cooling performance, monitor system temperature, and change the color of the RGB LED lighting. Extra-thick radiator The 120mm radiator works with standard 120mm fan mounts for wide compatibility, but has a depth of 49mm for increased cooling surface area and faster, more efficient cooling. Customized cooling performance You can select the speed of the dual SP120L PWM fans via the Corsair Link control panel or any standard fan speed utility. And, you have options: use just one fan to save space, or install both in a push-pull configuration for extra cooling efficiency. Built-in Corsair Link Attach the included Corsair Link cable to a USB header on your motherboard and download the free Corsair Link software to unlock even more power. You can customize cooling performance, monitor coolant and CPU temperatures, and change the color of the RGB LED lighting from the default white to match your system or to change color based on temperature readings and other inputs. High-performance CPU cooling made simple The H80i v2 is a closed loop design that comes pre-filled. It includes a modular, tool-free mounting bracket for faster installation, and it features improved coldplate and pump designs for highly tuned efficiency. About Hydro Series Liquid CPU Coolers Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits. Contents and Specifications Package contents Hydro Series H80i v2 Liquid CPU Cooler Mounting kit for all modern CPU sockets Two 120mm High Torque Fans Fan and radiator mounting screws Thermal compound (pre-applied) Compatibility Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3 AMD™ sockets FM1, FM2, AM2, AM3 Technical specifications Radiator dimensions: 154mm x 123mm x 49mm Fan dimensions: 120mm x 120mm x 25mm Fan speed: 2435 +/- 10% RPM   Fan airflow: 70.69 CFM Fan static pressure: 4.65 mmH2O Fan noise level: 37.7 dB(A)

Website: www.signwave.in Mobile: 09886789678/ 080-41530751 Hi All We have DELL Servers for rent & sales Power edge R610 server specification: Processor: Processor Intel Xeon processor 5500 and 5600 series Six-core Intel Xeon Quad-core Intel Xeon Operating System Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Microsoft Windows Small Business Server 2008 Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V) Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Microsoft Windows HPC Server 2008 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualization options: Citrix XenServer Microsoft Hyper-V through Microsoft Windows Server 2008 VMware vSphere ESX and ESXi Red Hat Enterprise Virtualization Memory2 Up to 192GB (12 DIMM slots) 1GB/2GB/4GB/8GB/16GB DDR3 up to 1333MT/s Drive Bays Hot-Swap options available: Up to six 2.5 SAS, SATA or SSD drives Chassis R610 Rack Height: 4.26cm (1.68) Width: 48.24cm (18.99) (includes rack latches) Depth: 77.2cm (30.39) (includes PSU handles and bezel) Weight (maximum config): 17.69Kgs (39lbs) Fans Standard redundant cooling Rack Support Sliding ReadyRails for 4-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support full extension of the system out of the rack to allow serviceability of key internal components Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed) Rail depth with the CMA: 887 mm Square-hole rack adjustment range: 692-756 mm Round-hole rack adjustment range: 678-749 mm Static ReadyRails for 4-post & 2-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support tooled installation in 19 CEA-310-E compliant threaded hole 4-post and 2-post racks Rail depth: 608 mm Square-hole rack adjustment range: 588-828 mm Round-hole rack adjustment range: 574-821 mm Threaded-hole rack adjustment range: 592-846 mm 1U/2U Rail Attachment Brackets Availability Hot-plug hard drives, hot-plug redundant power, redundant cooling, ECC memory, Single Device Data Correction (SDDC), supports memory demand, patrol scrubbing and high availability failover cluster Power Two hot plug high efficient 502w PSU (Energy Smart) or Two hot-plug 717W PSUs (High Output) UPS (Uninterruptible Power Supplies): 1000W-5600W 2700W-5600W High Efficiency Online Extended Battery Module (EBM) Network Management Card Thermal Operation Continuous Operation: 10C to 35C, 10% to 80% relative humidity (RH). 10% of annual operating hours: 5C to 40C, 5% to 85%RH. 1% of annual operating hours: -5C to 45C, 5% to 90%RH. For in-depth detail, check your user manual. RAID Controllers Internal: PERC H200 (6Gb/s) PERC H700 (6Gb/s) with 512MB Non-Volatile cache PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache SAS 6/iR PERC 6/i with 256MB battery-backed cache External: PERC H800 (6Gb/s) with 512MB Non-Volatile cache PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache PERC 6/E with 256MB or 512MB of battery-backed cache External HBAs (non-RAID): 6Gbps SAS HBA SAS 5/E HBA LSI2032 PCIe SCSI HBA Chipset Intel 5520 (Tylersberg) Storage SAS, Near-line SAS, SSD and SATA 2.5" SAS (15K RPM): 73GB3, 146GB3 2.5" SAS (10k RPM):146GB3, 300GB3,600GB3 2.5" Enterprise SSD: 50GB3, 100GB3 2.5" SATA (7.2K):80GB3, 500GB3 2.5" Near-Line SAS (7.2k):500GB3 Maximun Internal Storage: 3.6 TB with six 600 GB SAS drives Slots 2 PCIe G2 slots + 1 storage slot: Two x8 PCIe Gen2 slots One x4 PCIe Gen1 slot dedicated for the integrated storage controller card Network Controller Two dual port embedded Broadcom NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing. Optional 1GBe and 10GBe add-in NICs Management Dell OpenManage Lifecycle Controller iDRAC6 Enterprise (Optional) vFlash (Optional) Embedded Hypervisor (Optional) Citrix XenServer Microsoft Windows Server 2008, with Hyper-V VMware vSphere 4.1 (including VMware ESX 4.1 or VMware ESXi 4.1) Communications Optional add-in NICs: Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement) Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8 Intel 10GBase-T Copper Single Port NIC, PCI-E x8 Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8 Intel Gigabit ET Dual Port Server Adapter -Intel Gigabit ET Quad Port Server Adapter Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+ Broadcom BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4 Broadcom NetXtreme II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload Brocade CNA Dual-port adapter Emulex CNA iSCSI HBA stand up adapter OCE10102-IX-D Optional add in HBAs: Qlogic QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA Qlogic QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA Qlogic QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4 Qlogic QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4 Emulex LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Emulex LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Brocade FC4 and 8 GB HBAs Video Card Integrated Matrox G200, 8 MB shared video memory Environmental Operating Conditions Acoustics: Typically configured 2.5 chassis in 23 2 C ambient Idle: LwA-UL = 5.3 bels, LpAm = 35 dBA For more details, contact us: Mobile: 09886789678/080-41530751 Website: www.signwave.in e-mail: dinesh@signwave.in Signwave Technologies # 32,2nd main, 7th cross,Muniyappa layout, Garebhavi palya, Bangalore-560 068.INDIA

Website: www.signwave.in Mobile: 080-41530751 Hi All We have DELL Servers for rent & sales Power edge R610 server specification: Processor: Processor Intel Xeon processor 5500 and 5600 series Six-core Intel Xeon Quad-core Intel Xeon Operating System Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Microsoft Windows Small Business Server 2008 Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V) Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Microsoft Windows HPC Server 2008 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualization options: Citrix XenServer Microsoft Hyper-V through Microsoft Windows Server 2008 VMware vSphere ESX and ESXi Red Hat Enterprise Virtualization Memory2 Up to 192GB (12 DIMM slots) 1GB/2GB/4GB/8GB/16GB DDR3 up to 1333MT/s Drive Bays Hot-Swap options available: Up to six 2.5 SAS, SATA or SSD drives Chassis R610 Rack Height: 4.26cm (1.68) Width: 48.24cm (18.99) (includes rack latches) Depth: 77.2cm (30.39) (includes PSU handles and bezel) Weight (maximum config): 17.69Kgs (39lbs) Fans Standard redundant cooling Rack Support Sliding ReadyRails for 4-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support full extension of the system out of the rack to allow serviceability of key internal components Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed) Rail depth with the CMA: 887 mm Square-hole rack adjustment range: 692-756 mm Round-hole rack adjustment range: 678-749 mm Static ReadyRails for 4-post & 2-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support tooled installation in 19 CEA-310-E compliant threaded hole 4-post and 2-post racks Rail depth: 608 mm Square-hole rack adjustment range: 588-828 mm Round-hole rack adjustment range: 574-821 mm Threaded-hole rack adjustment range: 592-846 mm 1U/2U Rail Attachment Brackets Availability Hot-plug hard drives, hot-plug redundant power, redundant cooling, ECC memory, Single Device Data Correction (SDDC), supports memory demand, patrol scrubbing and high availability failover cluster Power Two hot plug high efficient 502w PSU (Energy Smart) or Two hot-plug 717W PSUs (High Output) UPS (Uninterruptible Power Supplies): 1000W-5600W 2700W-5600W High Efficiency Online Extended Battery Module (EBM) Network Management Card Thermal Operation Continuous Operation: 10C to 35C, 10% to 80% relative humidity (RH). 10% of annual operating hours: 5C to 40C, 5% to 85%RH. 1% of annual operating hours: -5C to 45C, 5% to 90%RH. For in-depth detail, check your user manual. RAID Controllers Internal: PERC H200 (6Gb/s) PERC H700 (6Gb/s) with 512MB Non-Volatile cache PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache SAS 6/iR PERC 6/i with 256MB battery-backed cache External: PERC H800 (6Gb/s) with 512MB Non-Volatile cache PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache PERC 6/E with 256MB or 512MB of battery-backed cache External HBAs (non-RAID): 6Gbps SAS HBA SAS 5/E HBA LSI2032 PCIe SCSI HBA Chipset Intel 5520 (Tylersberg) Storage SAS, Near-line SAS, SSD and SATA 2.5" SAS (15K RPM): 73GB3, 146GB3 2.5" SAS (10k RPM):146GB3, 300GB3,600GB3 2.5" Enterprise SSD: 50GB3, 100GB3 2.5" SATA (7.2K):80GB3, 500GB3 2.5" Near-Line SAS (7.2k):500GB3 Maximun Internal Storage: 3.6 TB with six 600 GB SAS drives Slots 2 PCIe G2 slots + 1 storage slot: Two x8 PCIe Gen2 slots One x4 PCIe Gen1 slot dedicated for the integrated storage controller card Network Controller Two dual port embedded Broadcom NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing. Optional 1GBe and 10GBe add-in NICs Management Dell OpenManage Lifecycle Controller iDRAC6 Enterprise (Optional) vFlash (Optional) Embedded Hypervisor (Optional) Citrix XenServer Microsoft Windows Server 2008, with Hyper-V VMware vSphere 4.1 (including VMware ESX 4.1 or VMware ESXi 4.1) Communications Optional add-in NICs: Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement) Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8 Intel 10GBase-T Copper Single Port NIC, PCI-E x8 Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8 Intel Gigabit ET Dual Port Server Adapter -Intel Gigabit ET Quad Port Server Adapter Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+ Broadcom BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4 Broadcom NetXtreme II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload Brocade CNA Dual-port adapter Emulex CNA iSCSI HBA stand up adapter OCE10102-IX-D Optional add in HBAs: Qlogic QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA Qlogic QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA Qlogic QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4 Qlogic QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4 Emulex LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Emulex LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Brocade FC4 and 8 GB HBAs Video Card Integrated Matrox G200, 8 MB shared video memory Environmental Operating Conditions Acoustics: Typically configured 2.5 chassis in 23 2 C ambient Idle: LwA-UL = 5.3 bels, LpAm = 35 dBA For more details, contact us: Mobile: 080-41530751 Website: www.signwave.in e-mail: dinesh@signwave.in Signwave Technologies # 32,2nd main, 7th cross,Muniyappa layout, Garebhavi palya, Bangalore-560 068.INDIA

Website: www.signwave.in Mobile: 080-41530751 Hi All We have DELL Servers for rent & sales Power edge R610 server specification: Processor: Processor Intel Xeon processor 5500 and 5600 series Six-core Intel Xeon Quad-core Intel Xeon Operating System Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Microsoft Windows Small Business Server 2008 Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V) Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Microsoft Windows HPC Server 2008 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualization options: Citrix XenServer Microsoft Hyper-V through Microsoft Windows Server 2008 VMware vSphere ESX and ESXi Red Hat Enterprise Virtualization Memory2 Up to 192GB (12 DIMM slots) 1GB/2GB/4GB/8GB/16GB DDR3 up to 1333MT/s Drive Bays Hot-Swap options available: Up to six 2.5 SAS, SATA or SSD drives Chassis R610 Rack Height: 4.26cm (1.68) Width: 48.24cm (18.99) (includes rack latches) Depth: 77.2cm (30.39) (includes PSU handles and bezel) Weight (maximum config): 17.69Kgs (39lbs) Fans Standard redundant cooling Rack Support Sliding ReadyRails for 4-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support full extension of the system out of the rack to allow serviceability of key internal components Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed) Rail depth with the CMA: 887 mm Square-hole rack adjustment range: 692-756 mm Round-hole rack adjustment range: 678-749 mm Static ReadyRails for 4-post & 2-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support tooled installation in 19 CEA-310-E compliant threaded hole 4-post and 2-post racks Rail depth: 608 mm Square-hole rack adjustment range: 588-828 mm Round-hole rack adjustment range: 574-821 mm Threaded-hole rack adjustment range: 592-846 mm 1U/2U Rail Attachment Brackets Availability Hot-plug hard drives, hot-plug redundant power, redundant cooling, ECC memory, Single Device Data Correction (SDDC), supports memory demand, patrol scrubbing and high availability failover cluster Power Two hot plug high efficient 502w PSU (Energy Smart) or Two hot-plug 717W PSUs (High Output) UPS (Uninterruptible Power Supplies): 1000W-5600W 2700W-5600W High Efficiency Online Extended Battery Module (EBM) Network Management Card Thermal Operation Continuous Operation: 10C to 35C, 10% to 80% relative humidity (RH). 10% of annual operating hours: 5C to 40C, 5% to 85%RH. 1% of annual operating hours: -5C to 45C, 5% to 90%RH. For in-depth detail, check your user manual. RAID Controllers Internal: PERC H200 (6Gb/s) PERC H700 (6Gb/s) with 512MB Non-Volatile cache PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache SAS 6/iR PERC 6/i with 256MB battery-backed cache External: PERC H800 (6Gb/s) with 512MB Non-Volatile cache PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache PERC 6/E with 256MB or 512MB of battery-backed cache External HBAs (non-RAID): 6Gbps SAS HBA SAS 5/E HBA LSI2032 PCIe SCSI HBA Chipset Intel 5520 (Tylersberg) Storage SAS, Near-line SAS, SSD and SATA 2.5" SAS (15K RPM): 73GB3, 146GB3 2.5" SAS (10k RPM):146GB3, 300GB3,600GB3 2.5" Enterprise SSD: 50GB3, 100GB3 2.5" SATA (7.2K):80GB3, 500GB3 2.5" Near-Line SAS (7.2k):500GB3 Maximun Internal Storage: 3.6 TB with six 600 GB SAS drives Slots 2 PCIe G2 slots + 1 storage slot: Two x8 PCIe Gen2 slots One x4 PCIe Gen1 slot dedicated for the integrated storage controller card Network Controller Two dual port embedded Broadcom NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing. Optional 1GBe and 10GBe add-in NICs Management Dell OpenManage Lifecycle Controller iDRAC6 Enterprise (Optional) vFlash (Optional) Embedded Hypervisor (Optional) Citrix XenServer Microsoft Windows Server 2008, with Hyper-V VMware vSphere 4.1 (including VMware ESX 4.1 or VMware ESXi 4.1) Communications Optional add-in NICs: Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement) Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8 Intel 10GBase-T Copper Single Port NIC, PCI-E x8 Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8 Intel Gigabit ET Dual Port Server Adapter -Intel Gigabit ET Quad Port Server Adapter Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+ Broadcom BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4 Broadcom NetXtreme II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload Brocade CNA Dual-port adapter Emulex CNA iSCSI HBA stand up adapter OCE10102-IX-D Optional add in HBAs: Qlogic QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA Qlogic QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA Qlogic QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4 Qlogic QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4 Emulex LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Emulex LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Brocade FC4 and 8 GB HBAs Video Card Integrated Matrox G200, 8 MB shared video memory Environmental Operating Conditions Acoustics: Typically configured 2.5 chassis in 23 2 C ambient Idle: LwA-UL = 5.3 bels, LpAm = 35 dBA For more details, contact us: Mobile: 080-41530751 Website: www.signwave.in e-mail: dinesh@signwave.in Signwave Technologies # 303,4th main, Duo City layout, Basapura, Bengaluru-560 100.INDIA

StarTech.com TX3 Fan Power Splitter Cable - 6-Inch (TX3SPLITTER). This TX3 Fan Power Splitter Cable lets you connect two 3-pin (TX3) fans to a single power supply connector allowing you to optimize your cooling capability without having to upgrade the power supply. Providing a flexible way to position computer case fans as needed the TX3 Fan Power Splitter cable offers a connection length of 6in eliminating the need to strain the connection from the computer power supply

StarTech.com 12-Inch 4 Pin Fan Power Splitter Cable - F/M (FAN4SPLIT12). The FAN4SPLIT12 Fan Power Splitter Cable enables you to connect two 4-pin (PWM) fans to a single power supply connector which allows you to optimize your computer cooling capability without having to upgrade the power supply. Providing a flexible way to position computer case fans as needed this 4-pin Fan Power Splitter cable offers a connection length of 1ft eliminating the need to strain the connection from the computer power supply

Description Single Channel 12V Relay Board: A relay is an electrically operated switch. Current flowing through the coil of the relay creates a magnetic field which attracts a lever and changes the switch contacts. The coil current can be on or off so relays have two switch positions. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The board has ONE relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by the RED Led. This is a Single channel relay board operates on 12V. Can be used directly to control 240V power appliance from most of the microcontrollers and other control system circuits. Perfect for switching 240V appliances like lights, fans, etc. The board has a high quality relay, which can handle a maximum of 10A @ 120V or 7A @ 240V AC. Each Relay has three connections - Common - C, Normally Open-NO, Normally Closed-NC brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication and a relay status LED to ease debugging. Power input and relay control signals are brought to header pins on the board. Features: Selectable Port Input Mounting Supports Provided Relay Switching Output Suitable for 7A @ 250Vac or 10A @ 120Vac LED Indication of Relay ON. Power Indication LED. Direct input from 3-5V Microcontroller for relay control. Output terminal for relay contacts. Provision of male header for wire connection. Powered from external 12V or from male header. Note: It is important that microcontroller share ground with relay board along with other control signals else it will not able to control relay. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description Four Channel 12V Relay Board: A relay is an electrically operated switch. Current flowing through the coil of the relay creates a magnetic field which attracts a lever and changes the switch contacts. The coil current can be on or off so relays have two switch positions. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The board has FOUR relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by the RED Led. This is a 4 channel relay board operates on 12V. Can be used directly to control 240V power appliance from most of the microcontrollers and other control system circuits. Perfect for switching 240V appliances like lights, fans, etc. The board has a high quality relay, which can handle a maximum of 10A @ 120V or 7A @ 240V AC. Each Relay has three connections - Common - C, Normally Open-NO, Normally Closed-NC brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication and a relay status LED to ease debugging. Power input and relay control signals are brought to header pins on the board. Features: Selectable Port Input Mounting Supports Provided Relay Switching Output Suitable for 7A @ 250Vac or 10A @ 120Vac LED Indication of Relay ON. Power Indication LED. Direct input from 3-5V Microcontroller for relay control. Output terminal for relay contacts. Provision of male header for wire connection. Powered from external 12V or from male header. Note: It is important that microcontroller share ground with relay board along with other control signals else it will not able to control relay. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

~ It is an electric dishwasher of BOSCH company. # Used till now ->. 10-12 washes only # Condition ->. A1 condition hmm # Scratches -> 1-2 minor ( not visible) # Eco Silence Drive # Colour -> Silver metablic body # Additional -> Bosch cutlery basket, aqua sensor, Automatic detergent detection # Has two trolley with two fans. # Features/ Programs type -> Eco , intense kadhai, quick, prerinse,auto,express sparkle. # Additional features -> Start timer setting , vario eco, half load , extra dry. # Voltage -> 220-240V # Power -> 1020W # Water temperature -> 45-70 degree (as per programs type selected.) # Type of utensils-> All types of utensils can be washed Reason for sale -> Renovation of kitchen.

Call to buy ncomputing M-in-1 Thin Client Kit for virtual desktops in Chennai. The M300 provides a simple, powerful and affordable PC Expansion alternative. As the industry's first 3-in-1 thin client offering, the M300 delivers a rich PC experience at 1/3 the cost of PCs and typical thin clients. With this breakthrough, NComputing uniquely delivers innovation that multiplies the value customers can expect from thin clients in a virtual desktop environment. Up to 45 users per host – Fewer PCs to manage equals lower computing costs per user.Ethernet Connect - Classrooms, labs or offices can connect at greater distances through the local LAN.Numo 2 SoC – Provides PC-quality full screen video streaming. USB Support – Each device includes one USB 2.0 for peripheral support and two USB ports for mouse and keyboard.vSpace Server Software – Simple to install, easy to configure, no complicated hypervisors to manage and no expensive annual licenses to buy.vSpace Management Console – Client devices are easily configured through a remote console Overview • Each M300 kit includes 3 client devices*Share one PC with up to 45 users • Ethernet ConnectedPowered by NumoUSB keyboard and mouseUSB 2.0 peripheral supportMicrophone & audio outEnergy-efficient (typically 2 watts per user)Slash PC hardware and support costs by up to 75%Powerful vSpace® Server desktop virtualization software includedEasy to set up, maintain, manage and secure • Compact and reliable (no fans or disks)Remote management software included Authorised ncomputing dealers in Chennai offering you free home delivery and installation with better service support, having 12+ years experience, exceptional values to clients through effective development cost, which in turn help clients to improve their productivity. All our resources and processes are dedicated to ensure that the solutions developed are of the highest quality and are designed to accommodate the future needs. Contact us on or log on http://chennaisystems.com

Call 9791091909 to buy ncomputing M300 3-in-1 Thin Client Kit for virtual desktops in Chennai. The M300 provides a simple, powerful and affordable PC Expansion alternative. As the industry's first 3-in-1 thin client offering, the M300 delivers a rich PC experience at 1/3 the cost of PCs and typical thin clients. With this breakthrough, NComputing uniquely delivers innovation that multiplies the value customers can expect from thin clients in a virtual desktop environment. Up to 45 users per host – Fewer PCs to manage equals lower computing costs per user.Ethernet Connect - Classrooms, labs or offices can connect at greater distances through the local LAN.Numo 2 SoC – Provides PC-quality full screen video streaming. USB Support – Each device includes one USB 2.0 for peripheral support and two USB ports for mouse and keyboard.vSpace Server Software – Simple to install, easy to configure, no complicated hypervisors to manage and no expensive annual licenses to buy.vSpace Management Console – Client devices are easily configured through a remote console Overview • Each M300 kit includes 3 client devices*Share one PC with up to 45 users • Ethernet ConnectedPowered by NumoUSB keyboard and mouseUSB 2.0 peripheral supportMicrophone & audio outEnergy-efficient (typically 2 watts per user)Slash PC hardware and support costs by up to 75%Powerful vSpace® Server desktop virtualization software includedEasy to set up, maintain, manage and secure • Compact and reliable (no fans or disks)Remote management software included Authorised ncomputing dealers in Chennai offering you free home delivery and installation with better service support, having 12+ years experience, exceptional values to clients through effective development cost, which in turn help clients to improve their productivity. All our resources and processes are dedicated to ensure that the solutions developed are of the highest quality and are designed to accommodate the future needs. Contact us on 9791091909 or log on http://chennaisystems.com