Gbs card bus

Product Description: Gainward GeForce GTX 980 graphics card - GF GTX 980 - 4 GB Device Type: Graphics card Bus Type: PCI Express 3.0 x16 Graphics Engine: NVIDIA GeForce GTX 980 Memory: 4 GB - GDDR5 Core Clock: 1127 MHz Boost Clock: 1216 MHz CUDA Cores: 2048 Effective Memory Clock: 3.5 GHz RAMDAC: 400 MHz Memory Interface: 256-bit Max Monitors Supported: 4 Interfaces: DVI-I (dual link) ¦ 3 x Mini DisplayPort ¦ Mini-HDMI ¦ VGA - with adapter API Supported: OpenCL, DirectCompute, OpenGL 4.4, DirectX 12 Dimensions (WxDxH): 28 cm x 11.2 cm General CUDA Cores 2048 Max Monitors Supported 4 API Supported OpenCL, DirectCompute, OpenGL 4.4, DirectX 12 Boost Clock 1216 MHz Bus Type PCI Express 3.0 x16 Device Type Graphics card Interfaces DVI-I (dual link) ¦ 3 x Mini DisplayPort ¦ Mini-HDMI ¦ VGA - with adapter Core Clock 1127 MHz RAMDAC 400 MHz Process Technology 28 nm Features Dual Slot Fan Cooler, Nvidia CUDA technology, Nvidia PhysX-Ready, Nvidia 3D Vision technology, Nvidia 3D Vision Surround Ready, Nvidia Surround technology, Nvidia SLI ready, NVIDIA Adaptive Vertical Sync, Triple Fan, NVIDIA GPU Boost 2.0, NVIDIA Project SHIELD Ready, UEFI BIOS, NVIDIA G-Sync ready, NVIDIA GameStream, Maxwell architecture, NVIDIA Dynamic Super Resolution technology, NVIDIA MFAA technology, NVIDIA GameWorks, DrMOS, HDCP Graphics Engine NVIDIA GeForce GTX 980 Memory Size 4 GB Technology GDDR5 SDRAM Bus Width 256-bit Bandwidth 224 GBps Effective Clock Speed 3.5 GHz Miscellaneous Height 11.2 cm Cables Included 1 x DVI-VGA adapter Depth 28 cm Software Included Gainward Expertool II System Requirements Additional Requirements 6-pin + 8-pin power connectors Required Power Supply 500 W OS Required Microsoft Windows Vista / 7 / 8

Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-U2B The Apple/Adaptec AHA-U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles , and . This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the U2, known as the U2B, lacks the problematic Adaptec "SpeedFlex" circuitry found on the commercial U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card. WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: SENTHILKUMAR

Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-U2B The Apple/Adaptec AHA-U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles , and . This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the U2, known as the U2B, lacks the problematic Adaptec /"SpeedFlex/" circuitry found on the commercial U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card. WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: EMAIL:

Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI, SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-2940U2B The Apple/Adaptec AHA-2940U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles 58204, and 58256. This card has a standard 68-pin MicroD external interface and one internal 68-pin interface. To ensure the best compatibility, flash this board with the downloadable 2940U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the 2940U2, known as the U2B, lacks the problematic Adaptec "SpeedFlex" circuitry found on the commercial 2940U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card.

Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-2940U2B The Apple/Adaptec AHA-2940U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles 58204, and 58256. This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable 2940U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the 2940U2, known as the U2B, lacks the problematic Adaptec /"SpeedFlex/" circuitry found on the commercial 2940U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card.

Debug Card 4 Digit Find MotherBoard Fault, Diagnoses Motherboard Diagnostic Card, also known as a "POST Card" (Power On Self Test), is used to test & diagnose motherboard problems.   If your computer has problems powering up, freezes for long periods of time, suddenly shuts down unexpectedly or shows other signs of hardware problems - this card can diagnose your problem. It can even pinpoint problems you don't even know you have! Features Both ISA bus and PCI bus are suitable Determine defects by difference sounds coding with build-in speaker. It can diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc. The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes Support the power source working indicator -- +5V,+12V,+3.3V and 12V(When indicator LED is on to indicate its respective power is fine, otherwise to indicate its respective power is failure.) Fully compatible with any kind motherboards which has the PCI and ISA bus slot. Self checking remote display function Dual POST code display - User can readout the POST at PCB component and solder side. It is easy to view the POST code when user plugs the POST card

Micro SD Storage Board adap Micro SD TF Card Memory Shield Module SPI Fr Arduino Description 1 Support Micro SD Card, Micro SDHC card (high-speed card)  2 The level conversion circuit board that can interface level is 5V or 3.3V  3 Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board  4 Communication interface is a standard SPI interface  5 4 M2 screw positioning holes for easy installation  6 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;  7 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply  8 Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal  9 Micro SD card connector: yes since the bomb deck for easy card insertion and removal  10 Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination  11 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin  V voltage regulator circuit: LDO regulator output is 3.3V level converter chip, Micro SD card supply  13 Level conversion circuit: Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces to control the direction of the MISO signal is also converted into 3.3V, general AVR microcontroller system can read the signal;  14 Micro SD card connector: a self- bomb deck, easy card insertion.  15 Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination; Package Info 1Pc X Micro SD Storage Board  Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Specifications of Sandisk Extreme SDHC Card 32 GB Overview: The  32GB Extreme UHS-I Speed Class 3 SDHC Memory Card  from  SanDisk  features UHS Speed Class 3 compatibility to allow for both Full HD (p) and 4K ( x p) video recording. With data read speeds of up to 60 MB/s and write speeds of up to 40 MB/s you can also save and transfer other files such as photos, music, and more quickly and efficiently.  Along with U3 compatibility, this card also features Class 10 and UHS-I standards compatibility and is water, temperature, X-ray, and shock proof allowing you to record virtually anywhere. The writable label and included jewel case make for easy storage and organization, while the downloadable RescuePRO Deluxe data recovery software allows you to recover accidentally deleted images. Extreme continuous shot-to-shot performance with a data write speed of up to 40 MB/s Fast file transfers with maximum data read speed of up to 60 MB/s SDHC form factor Class 10, UHS Speed Class 3 to easily record Full HD (p) and 4K Ultra HD ( x p) video This Extreme SD memory card is waterproof, temperature proof, X-ray proof, and shock proof Engineered with Ultra High Speed (UHS-I) bus architecture Writable label for easy identification and organization Jewel Case to protect your card for storing and archiving RescuePRO Deluxe data recovery software downloadable offer, to recover accidentally deleted images Card Type SDHC Storage Capacity 32 GB Speed Class 10 UHS Speed Class U3 Bus Interface Speed UHS Class I Data Transfer Read Speed 60 MB/s Maximum Write Speed 40 MB/s Maximum Durability Shockproof, Temperature Extremes, Waterproof, X-Ray Proof Insertion/Removal Cycles Not Specified By Manufacturer Operating Temperature -13 to 185°F/ -25 to 85°C Storage Temperature -40 to 185°F/ -40 to 85°C Error Correction Not Specified By Manufacturer Built-in Write-Protect Switch Yes File System Not Specified By Manufacturer RoHS Compliant Not Specified By Manufacturer

Debug Card 4 Digit Find MotherBoard Fault, Diagnoses   Motherboard Diagnostic Card, also known as a "POST Card" (Power On Self Test), is used to test & diagnose motherboard problems.   If your computer has problems powering up, freezes for long periods of time, suddenly shuts down unexpectedly or shows other signs of hardware problems - this card can diagnose your problem. It can even pinpoint problems you don't even know you have! Features For PCI bus it is suitable It can diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc. The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes Support the power source working indicator -- +5V,+12V,+3.3V and 12V(When indicator LED is on to indicate its respective power is fine, otherwise to indicate its respective power is failure.) Fully compatible with any kind motherboards which has the PCI bus slot. Self checking remote display function Dual POST code display - User can readout the POST at PCB component and solder side. It is easy to view the POST code when user plugs the POST card

SVB- SOUND CARD 4 CHANNEL   KEY FEATURE:-  • PCI Plug and Play (PnP) bus interface, 32-bit PCI bus master. • Comprehensive driver support: Windows SE, Windows ME • Downloadable Wave Table Synthesizer, supporting Direct Music®. • Microphone echo and Karaoke ascending/descending key effects. • Channel Audio Card • 32 bits PCI Sound Quality • DirectSound3D® Compatible • DirectSound3D® Hardware Acceleration TECHNICAL SPECIFICATION:- • Full-duplex playback and recording. Built-in 16-bit CODEC. • HRTF-based 3D positional audio (C3DX™) for earphone and 4 / 6 CH speakers output, supporting both DirectSound 3D® & A3D® interfaces. • Windows , Windows XP and Windows NT 4.0 Linux, BeOS, etc…. • MPU-401 Game/Midi port and legacy audio SB Pro support. • Professional digital interface, supporting 24-bit SPDIF IN/OUT (Hardware 44.1K and 48K in/out). • Single chip design, digital power +3.3V, analog power +5V, 128 pins Bulk Order Accepted In Reasonable Price You Can Contact Us at  Or  Mob No: . We Wish To Serve You Batter For Many Years To Come.   Thank you for visiting

its 2 year warranty remaining. not over heated. with all accessories. play all latest games ultra setting. original photo included. GPU Engine Specs: 768 CUDA Cores 928 MHz Base Clock 59.2 Texture Fill Rate (billion/sec) Memory Specs: 5.4 Gbps Memory Clock MB Standard Memory Config GDDR5 Memory Interface 128-bit Memory Interface Width 86.4 Memory Bandwidth (GB/sec) Feature Support: PhysX, TXAA Important Technologies 3D Vision, CUDA, DirectX 11, Adaptive VSync, FXAA, NVIDIA Surround Other Supported Technologies 4.3 OpenGL 11 Microsoft DirectX 11.2 API PCI Express 3.0 Bus Support 1 Yes Certified for Windows 8 Yes 3D Vision Ready Display Support: 4 Displays Multi Monitor x Maximum Digital Resolution x Maximum VGA Resolution Yes HDCP Yes HDMI 3 One Dual Link DVI-I, One Dual Link DVI-D, One Mini HDMI Standard Display Connectors Internal Audio Input for HDMI Standard Graphics Card Dimensions: 5.7 inches Length inches Height Dual-width Width Thermal and Power Specs: 105 C Maximum GPU Temperature (in C) 110 W Maximum Graphics Card Power (W) 400 W Minimum System Power Requirement (W) 4 One 6-pin Supplementary Power Connectors 3D Vision Ready Yes 3D Blu-Ray Yes 3D Gaming Yes 3D Photos 1 - GeForce GTX 650 Ti supports PCI Express 3.0. The Intel X79/SNB-E PCI Express 2.0 platform is only currently supported up to 5GT/s (PCIE 2.0) bus speeds even though some motherboard manufacturers have enabled higher 8GT/s speeds. x at 30Hz or x at 24Hz supported over HDMI. 3 - Support for HDMI including GPU accelerated Blu-ray 3D support (Blu-ray 3D playback requires the purchase of a compatible software player from CyberLink, ArcSoft, Corel, or Sonic), x.v.Color, HDMI Deep Color, and 7.1 digital surround sound will be added

NEW! LCD Display PCI Smart Motherboard Diagnostic Debug Card     It can diagnosis the  motherboard signal  which show the problem of CPU, Memory, display card and so on. Intelligent analysis of the code corresponding to the cause of the malfunction, and gives diagnostic program! It can display the halting execution automatic with a couple of times. LCD displays  shows diagnosis result of motherboard. Especially helpful to pinpoint where is the problem when power on the computer and find no display or machine hang. PCI bus reset and CLK signal working indicator.(When indicator LED is on to indicate its respective signal is fine.) Compatible with Phoenix, Award and AMI Bios motherboards which has the PCI bus slot. Back light POST code display - User can readout the POST on LCD easily to view POST code even under dark place. Specifications: Working

Description The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Features： Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination; Specification: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Power supply: 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface: Standard SPI interface Positioning holes: 4 M2 screw positioning holes Package included: 1 x  Mciro SD/TF Card Memory Shield Module

Manufactured by:QLOGIC Model/Part :SYM22801 Device Type: Host bus adapter Form Factor: Plug-in card Host Type: Host bus-32-bit, 33 MHz PCI SCSI bus: Single ended, wide SCSI performance Ultra- (80 MBps dual channel @ 40 MBps) SCSI I/O processor: LSI53C876 SCSI connector configuration: Internal: (2) 68-pin HD connectors and (2) 50-pin External: (2) 68-pin VHDCI connectors Maximum number of SCSI devices: 30

GTX 960 Amp edition twin fan 2 GB graphics card Interface Type PCI Express 3.0 Max Resolution 4096 x 2160 at 60 Hz Max Monitors Supported 4 Interfaces DVI-I (dual link) HDMI 3 x DisplayPort VGA - with adapter Graphics Engine NVIDIA GeForce GTX 960 Bus Type PCI Express 3.0 Max Monitors Supported 4 Boost Clock 1329 MHz API Supported OpenCL, OpenGL 4.4, DirectX 12 CUDA Cores 1024 Core Clock 1266 MHz Max Resolution Details DVI: 2560 x 1600 / DisplayPort: 4096 x 2160 / HDMI: 4096 x 2160 Manufacturer ZOTAC International (MCO) Limited POWER DEVICE Power Consumption Operational 120 Watt MEMORY Size 2 GB Effective Clock Speed 7.01 Hz Bus Width 128-bit Technology GDDR5 SDRAM Technology GDDR5 SDRAM