Hb bridge support

Original Gigabyte GA-G41M-COMBO Board LGA775 Socket Support DDR2 & DDR3 RAM +   Motherboard + Back Panal + 2 SATA Cables + IDE Cable + Driver CD + Motherboard Original Box Not Available. GA-G41M-Combo-ver2.0 CPU Support for an Intel ®  Core™ 2 Extreme processor/ Intel ®  Core™ 2 Quad processor/Intel ®  Core™ 2 Duo processor/ Intel ® Pentium ®  processor/Intel ®  Celeron ®  processor in the LGA775 package (Go to GIGABYTE's website for the latest CPU support list.) L2 cache varies with CPU Front Side Bus 1333/1066/800 MHz FSB Chipset North Bridge: Intel ®  G41 Chipset South Bridge: Intel ®  ICH7 Memory DDR3: 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1) Dual channel memory architecture Support for DDR3 1333(O.C.)/1066/800 MHz memory modules DDR2: 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory (Note 1) Dual channel memory architecture Support for DDR2 1066(O.C.)/800/667 MHz memory modules (Note: Mixed mode, populating DDR2 and DDR3 memory modules simulta- neously is not supported. Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Graphics North Bridge: 1 x D-Sub port Audio VIA VT1708S codec High Definition Audio 2/4/5.1-channel Support for S/PDIF Out Support for CD In LAN 1 x Atheros AR8151 chip (10/100/1000 Mbit) Expansion Slots 1 x PCI Express x16 slot, running at x16 1 x PCI Express x1 slot 2 x PCI slots Storage Interface South Bridge: 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices iTE IT8718F chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB South Bridge: Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 1 x floppy disk drive connector 1 x IDE connector 4 x SATA 3Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x CD In connector 1 x S/PDIF Out header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x clearing CMOS jumper

High Ampere (5A) Dual Motor Driver H-Bridge Kit   Package includes: § 1x High ampere (5A) Dual Motor Driver PCB § 8x Power Transistors § 4x NPN biasing transistors (2N) § Resistors: 10k Ω (0.25W), 3.3k Ω (0.25W), W), 1k Ω (0.5W) § Capacitor: 1x µf § 8x 1N diode § 3x 5mm screw terminal § 4x LED     Description: §    The motor driver module is based on MOSFETs (Metal Oxide Semiconductor Field Effect Transistor) and power transistors delivering current  up to 5A  (max current). §    The module has 4 inputs(with PWM support): “ IN A ”, “ IN B ”, “ IN C ”, “ IN D ”. §    The working logic is given below:   IN A IN B Direction 0 0 Brake 0 1 CW 1 0 CCW 1 1 Brake

    Other Items Feedbacks About Us Contact Us Add To Favorites   CNB353 - New Original L298N H-Bridge Motor Driver IC for DC,Stepper Motor Drive Make your own DC,Stepper motor Drive/CNC drive Circuit Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Product Condition: New Specifications Mfr Part Number:  Frontech N68 Combo Motherboard  CPU:  Socket, AM2+, AM3+, Support for Socket AM3+ Processors Support for Socket AM3 Processors- Supports AMD Phenom II X6/ X4/ X3/ X2 (except )/ Athlon II X4/ X3/ X2/ Sempron Processors Support for Socket AM2+ / AM2 Processors- AMD Phenom; FX/ Phenom/ Athlon 64 FX/ Athlon 64 X2 Dual-Core/ Athlon X2 Dual-Core/ Athlon 64/ Sempron Processor Supports AMD OverDrive w/ ACC Feature (Advanced Clock Calibration) Supports AMD's Cool 'n' Quiet Technology Supports Untied Overclocking Technology Supports Hyper-Transport 3.0 (HT 3.0) Technology FSB MHz (5.2 GT/s) Chipset:  North Bridge AMD 760G & South Bridge AMD SB710 Memory:  2x DDR(OC)/ (OC)/ DIMM Slots, 2x DDR DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 16GB(DDR3)/ 8GB(DDR2) Slots:  1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 2x PCI Slots SATA:  2x SATA2 Ports, Suppport RAID , JBOD IDE: 1 x ATA133 IDE Connector (Supports 2 x IDE devices) LAN:  Realtek RTLG, PCI-Express x1 Gigabit Ethernet Controller Ports:  4x USB 2.0 Ports, 1x PS/2 Mouse Port, 1x PS/2 Keyboard Port, 1x Serial Port, 1x VGA Port, 1x RJ45 LAN Port, Audio I/O Jacks Power Connector:  1x 24pin ATX Power Connector, 1x 4pin 12V Power Connector Form Factor:  MicroATX

ASROCK 960GC-GS FX Socket AM3+/ AMD 760G/ DDR3/ A&GbE/ MicroATX Motherboard   Product Condition: New Specifications Mfr Part Number:  960GC-GS FX CPU:  Socket AM3+, AM3, AM2+, AM2 Support for Socket AM3+ Processors Support for Socket AM3 Processors- Supports AMD Phenom II X6/ X4/ X3/ X2 (except )/ Athlon II X4/ X3/ X2/ Sempron Processors Support for Socket AM2+ / AM2 Processors- AMD Phenom; FX/ Phenom/ Athlon 64 FX/ Athlon 64 X2 Dual-Core/ Athlon X2 Dual-Core/ Athlon 64/ Sempron Processor Supports 8-Core CPU Supports AMD OverDrive w/ ACC Feature (Advanced Clock Calibration) Supports AMD's Cool 'n' Quiet Technology Supports Untied Overclocking Technology Supports Hyper-Transport 3.0 (HT 3.0) Technology FSB MHz (5.2 GT/s) Chipset:  North Bridge AMD 760G & South Bridge AMD SB710 Memory:  2x DDR(OC)/ (OC)/ DIMM Slots, 2x DDR DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 16GB(DDR3)/ 8GB(DDR2) Slots:  1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 2x PCI Slots SATA:  6x SATA2 Ports, Suppport RAID , JBOD IDE:  1x ATA133 IDE Connector (Supports 2 x IDE devices) Audio:  Realtek ALC-Channel High Definition Audio CODEC Video:  AMD Radeon Graphics w/ 512MB Max Shared Memory LAN:  Realtek RTLG, PCI-Express x1 Gigabit Ethernet Controller Ports:  10x USB 2.0 Ports (4 rear, 6 via headers), 1x PS/2 Mouse Port, 1x PS/2 Keyboard Port, 1x Serial Port, 1x VGA Port, 1x RJ45 LAN Port, Audio I/O Jacks Power Connector:  1x 24pin ATX Power Connector, 1x 4pin 12V Power Connector Form Factor:  MicroATX

ACER 946GZT-AM LGA775 DDR2 MOTHERBOARD + DUAL CORE CPU COMBO OFFER + Specifications: CPU: LGA775 socket for latest Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D processor FSB: MHz Supports Virtualization Technology/Hyper-Threading Technology CHIPSET: Intel® 946GZ & ICH7 North Bridge: Intel® 946GZ South Bridge: Intel® ICH7 GRAPHICS: Integrated Intel Graphics Media Accelerator (GMA) MEMORY: Dual-channel DDR2 memory architecture 2 x 240-pin DDR2 DIMM socket support up to 4 GB Support DDR DDR SDRAM EXPANSION SLOT: 1 x PCI Express x16 slot 1 x PCI Express x1 slot 2 x PCI slots STORAGE: Supported by Intel®ICH7 1 x Ultra DMA devices 4 x Serial ATA2 devices AUDIO: 7.1-channel audio CODEC LAN: Marvell Gigabit LAN controller REAR PANEL I/O: 1 x PS/2 keyboard & PS/2 mouse connectors 4 x USB ports 1 x RJ45 LAN connector 1 x VGA port 1 x Parallel port (LPT1) 1 x Serial port (COM1) 1 x Audio port (Line-in, Line-out, Mic-in) INTERNAL I/O CONNECTORS & HEADERS: 1 x 24-pin ATX Power Supply Connector & 4-pin 12V Connector 1 x FDD connector 360K~2.88M Byte, 3 Mode FDDs or LS x IDE connector 2 x USB 2.0 headers support additional 4 USB Ports 4 x Serial ATA connectors 1 x SPDIF out header 1 x Front panel switch/LED header 1 x Front panel audio header CD

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Gigabyte GA-880GM-D2H AM3 Socket Motherboard for AMD Processors AMD Athelon XGHz Dual Core Processor DDR3 2GB RAM 133MHz No Box Available, No Driver CD Available, No Back Panel Available 100% Tested and Working This item has been used previously. The item may have some signs of wear. Please see product images for more details. Product may have some scratches but it will be clean. CPU AM3 Socket: Support for AMD AM3 Phenom™ II processor / AMD Athlon™ II processor Hyper Transport Bus MT/s Chipset North Bridge: AMD 880G South Bridge: AMD SB710 Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 8GB of system memory (Note 1) Dual channel memory architecture Support for DDR (OC)/ MHz memory modules Onboard Graphics Integrated

Intel D915GVWB Spec Sheet Part Number D915GVWB Manufacturer Intel Downloads BIOS Drivers Manuals Chipset Intel 915GV Express ICH6 North Bridge Intel 82915GV GMCH Socket LGA775 Socket Processor Types Pentium 4 Number of CPUs 1 Hyper-Threading Support Yes Front Side Bus 800/533MHz Memory Type DDR Memory Channels Dual, Single Maximum Memory 4GB External Graphics None IGP Intel Graphics Media Accelerator 900 South Bridge Intel 82801FB ICH6 Audio 8-channel IDE 100/66/33 SCSI None SATA 1.5 GB/s RAID None LAN 10/100 Firewire None USB USB 2.0 Expansion Slots 2 x PCI 1 x PCI Express x1 BIOS Phoenix Form Factor microATX

Cisco WAP321 Wireless-N Selectable Band Access Point The Cisco WAP321 is a PoE wireless-N access point designed for small offices. It will handle up to 20 simultaneous clients (32 total) and lets you select whether you want to transmit at 2.4GhZ or 5Ghz, The Cisco WAP321 supports Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. Cisco WAP321 Overview The Cisco WAP321 is a sleek, high-performance, selectable Wireless-N access point that delivers fast, reliable wireless connectivity and allows small businesses to easily expand their wired networks. This device combines ease of use with business-class features such as a Gigabit Ethernet LAN port, support for IPv6, Power over Ethernet for simpler deployment, quality of service to prioritize network traffic, and comprehensive security to deliver the reliability and performance needed for small business networks. The elegant design has flexible mounting options that allow it to seamlessly blend into any small business environment. It can be managed with an intuitive browser-based GUI and is backed by a limited lifetime warranty. Built specifically for small businesses, the Cisco WAP321 offers selectable-band 802.11n wireless technology to deliver high throughput and extended range throughout your office. Advanced quality-of-service (QoS) features let you prioritize traffic to support bandwidth-sensitive applications. This sophisticated control enables you to take advantage of voice over WLAN (VoWLAN) to place or receive calls over the wireless LAN infrastructure. Cisco WAP321 Features: ● Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications. ● Wizard-based setup and configuration enables fast, simple deployment. ● Gigabit Ethernet LAN interface provides high-speed connectivity for faster downloads and demanding applications. ● Selectable-band wireless access lets you switch bands to minimize interference from other office devices and improve performance. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information. ● Power over Ethernet (PoE) support enables easy installation without the expense of additional wiring. ● Client bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop. ● Intelligent quality of service (QoS) prioritizes network traffic to keep critical network applications running at top performance. ● Power-saving sleep mode and port control features help maximize energy efficiency. ● Highly secure guest access enables safe wireless connectivity for visitors. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. Contact US : +91-9717317430/9911567618 Write us : sales@fidemonline.com URL : http://www.fidemonline.com

The  desktop machine is working nicely. I will send this with cpu fan and connector but I don't have motherboard CDs, drivers can be downloaded online(http://www.asus.com/Motherboards/P5SD2VM/HelpDesk_Download/). Here are specifications: CPU:  Intel® Pentium® Processor EM Cache, 2.20 GHz ) RAM: 2GB Kingston. Mother Board: P5SD2-VM CPU LGA775 socket for Intel® Core™2 Duo/Pentium D/Pentium 4/Celeron D Processors Support Intel® next generation 45nm CPU Support Intel® EIST/Hyper-Threading Technology Chipset SIS 672 SIS 968 Front Side Bus O.C/ MHz Memory 2 x 240-pin DIMM sockets support max. 4GB DDR non-ECC unbuffered memory *When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCI-E x 16 1 x PCI-E x 1  2 x PCI VGA SIS Mirage 3+ Integrated Graphics, up to 256MB shared memory Storage SIS 968 South Bridge: -1 x UltraDMA x SATA 3Gb/s with RAID 0 and RAID 1 function LAN Phy LAN Audio High Definition Audio, Realtek ALC-channel CODEC Support Jack-detect and SPIDF-OUT interface USB Max. 8 USB2.0 ports (4 on back I/O,4 on board) Special Features CrashFree BIOS 2 Q-FAN EZ Flash MyLogo Back Panel I/O Ports 1 x Parallel 1 x COM Port 1 x VGA Port 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x RJ45 4 x USB -Channel Audio I/O Internal I/O Connectors 1 x Floppy connector 1 x IDE connector for two devices 2 x USB 2.0 connectors for 4 additional USB 2.0 ports 1 x CPU fan connector 1 x Chassis fan connector 1 x Chassis intrusion connector 1 x S/PDIF out connector 1 x 4-pin internal speaker connector 1 x CD audio-in connector 1 x Front panel Audio connector 1 x 24-pin ATX Power connector 1 x 4-pin ATX 12V Power connector 1 x System panel connector BIOS 4 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI3.0, SM BIOS2.4 Manageability WOL by PME, WOR by PME, Chassis Intrusion, PXE O/S Compatibility Windows Vista/XP/ sever/ Accessories 1 x SATA cable 1 x SATA power cable 1 x UltraDMA cable 1 x FDD cable 1 x I/O Shield 1 x User Guide Form Factor mATX Form Factor, 9.6”x cm x 18.8cm)

The  desktop machine is working nicely. I will send this with cpu fan and connector but I don't have motherboard CDs, drivers can be downloaded online(http://www.asus.com/Motherboards/P5SD2VM/HelpDesk_Download/). Here are specifications: CPU:  Intel® Pentium® Processor E2200 (1M Cache, 2.20 GHz ) RAM: 2GB Kingston. Mother Board: P5SD2-VM CPU LGA775 socket for Intel® Core™2 Duo/Pentium D/Pentium 4/Celeron D Processors Support Intel® next generation 45nm CPU Support Intel® EIST/Hyper-Threading Technology Chipset SIS 672 SIS 968 Front Side Bus 1066O.C/800/533 MHz Memory 2 x 240-pin DIMM sockets support max. 4GB DDR2 667/533 non-ECC unbuffered memory *When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCI-E x 16 1 x PCI-E x 1  2 x PCI VGA SIS Mirage 3+ Integrated Graphics, up to 256MB shared memory Storage SIS 968 South Bridge: -1 x UltraDMA 133/100/66/33 - 2 x SATA 3Gb/s with RAID 0 and RAID 1 function LAN Phy 10/100 LAN Audio High Definition Audio, Realtek ALC662 6-channel CODEC Support Jack-detect and SPIDF-OUT interface USB Max. 8 USB2.0 ports (4 on back I/O,4 on board) Special Features CrashFree BIOS 2 Q-FAN EZ Flash MyLogo Back Panel I/O Ports 1 x Parallel 1 x COM Port 1 x VGA Port 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x RJ45 4 x USB 2.0/1.1 6-Channel Audio I/O Internal I/O Connectors 1 x Floppy connector 1 x IDE connector for two devices 2 x USB 2.0 connectors for 4 additional USB 2.0 ports 1 x CPU fan connector 1 x Chassis fan connector 1 x Chassis intrusion connector 1 x S/PDIF out connector 1 x 4-pin internal speaker connector 1 x CD audio-in connector 1 x Front panel Audio connector 1 x 24-pin ATX Power connector 1 x 4-pin ATX 12V Power connector 1 x System panel connector BIOS 4 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI3.0, SM BIOS2.4 Manageability WOL by PME, WOR by PME, Chassis Intrusion, PXE O/S Compatibility Windows Vista/XP/2003 sever/2000 Accessories 1 x SATA cable 1 x SATA power cable 1 x UltraDMA 133/100/66 cable 1 x FDD cable 1 x I/O Shield 1 x User Guide Form Factor mATX Form Factor, 9.6”x 7.4”(24.4cm x 18.8cm)

Cisco WAP121 Wireless Access Point The Cisco WAP121 is a wireless-N PoE access point with internal antenna for flexible deployment options. The Cisco WAP121 supports both Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. Cisco WAP121 Overview The Cisco WAP121 is a sleek, affordable, wireless access point that delivers fast, reliable wireless connectivity and enables small businesses to easily expand their wired networks. The device combines ease of use with business-class features such as support for IPv6, Power over Ethernet for simpler deployment, quality of service to prioritize network traffic, and advanced security to deliver the reliability and performance needed for small business networks. The sleek and elegant design with flexible mounting options allows it to seamlessly blend into any small business environment. It can be managed with an intuitive browser-based GUI and is backed by a limited lifetime warranty. Cisco WAP121 Features: ● Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications. ● Wizard-based setup and configuration enables fast, simple deployment. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, protects sensitive business information. ● Support for PoE enables easy installation without expensive additional wiring. ● Client bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop. ● IntelligentQoS prioritizes network traffic to help keep critical network applications running at top performance. ● Power-saving sleep mode and port control features help maximize energy efficiency. ● Highly secure guest access enables safe wireless connectivity for visitors. ● Support for IPv6 Contact US for details : +91-9911567618/9717317430 Write us : sales@fidemonline.com URL : http://www.fidemonline.com

Barely used-Excellent Condition-All original accessories included Details Original Bill included Item is covered under warranty Shipping within 1-2 business days on receiving cleared payment For queries, drop a message by clicking on ASK SELLER A QUESTION Specification Display Support for up to 3 display monitor(s) without DisplayPort 4 x Maximum Display Monitor(s) support Output 1 x HDMI (with 3D) 1 x DisplayPort 1.2 1 x Dual-Link DVI-D 1 x Dual-Link DVI-I GPU (Boost:) MHz Core Clock 28 nm Chip x Stream Processors Video Memory MB Size 256 -bit GDDR MHz Effective Dimension 228(L)X109(W)X35(H) mm Size. 2 x slot SoftwareDriver CD SAPPHIRE TriXX Utility AccessoryCrossFire™ Bridge Interconnect Cable DVI to VGA Adapter 6 PIN to 4 PIN Power Cable x 2 HDMI 1.4a high speed 1.8 meter cable(Full Retail SKU only)

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.