Ir control controller

Description Package Includes: 1 Piece new  21 key ir remote controller It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  21 key ir remote controller It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

WELCOME TO STAR_LIGHTZ*** ***YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE*** ***WE AIM AT PROVIDING BEST QUALITY PRODUCTS @ LOWEST POSSIBLE RATES*** ***WE USE QUALITY PACKING & SHIPPING ONLY*** ***YOUR FEEDBACK IS HIGHLY VALUABLE FOR OUR BUSINESS TO GROW*** Specifications: 44Key Remote Controller: Connection mode: Common Anode(+) Supply Voltage: 12V DC Max load current: 2Amps each color Remote dimension: L62mm x W35mm x H23mm Working Temperature: -20°C-60°C Remote battery 3V: 1xCR (Included) ON & OFF Turn Power ON & OFF.    R: Change color to RED.    G: Change color to GREEN.    B: Change color to BLUE.    W: Change color to WHITE.  8 Types Of Pattern: Quick, Slow, Auto, Flash, Fade 3, Fade 7, Jump 3, & Jump 7. 6 keys (DIY keys) for memories the colors what you preferred. DIY 1 to DIY 6

IR Infrared Remote Extender 4  Emitters 1 Receiver Repeater System Kit:: Product Information:: 100% Brand New. Color: Black With 1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED. With 2 emitters which is used to send the signals to the A/V components. 5V USB AC Power Supply. kHz operating range. This IR Repeater System Kit allows you to control home theater devices/components which are kept behind closet doors or

IR Remote Extender 4 Emitters 1 Receiver Infrared Repeater Hidden System Kit Features:     With 1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED.     With 4 emitters which is used to send the signals to the A/V components.     With 1 IR distribution block     12V DC Power Supply     kHz operating range.     Receive Frequency Range 34 KHZ to 60KHZ     Transmit Frequencies 38 KHZ & 56KHZ     Receive Range 8 Meter     Emitter Range 5-10CM     Power 12VDC,30mA MAX.     Dimensions (IR Receiver):31(L)×17(W)×13(H)mm     (IR Emitters):13(L)×8(W)×5.5(H)mm     (IR Connecting Block):90(L)×55(W)×26(H)mm     Cord Length (IR Receiver):1.5 Meter (Approx)     (IR Emitters): 3 Meter (Approx)     Connector Type:3.5mm mini plug   Easy Installation:     1. Stick the Receiver

The Best Deal on   !!!! IR Remote Extender 4 Emitters 1 Receiver Infrared Repeater Hidden System Kit Features: 100% Brand New. With 1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED. With 4 emitters which is used to send the signals to the A/V components. With 1 IR distribution block 12V DC Power Supply kHz operating range. Receive Frequency Range 34 KHZ to 60KHZ Transmit Frequencies 38 KHZ & 56KHZ Receive Range 8 Meter Emitter Range 5-10CM Power 12VDC,30mA MAX. Dimensions (IR Receiver):31(L)×17(W)×13(H)mm (IR Emitters):13(L)×8(W)×5.5(H)mm (IR Connecting Block):90(L)×55(W)×26(H)mm Cord Length (IR Receiver):1.5 Meter (Approx) (IR Emitters): 3 Meter (Approx) Connector Type:3.5mm mini plug This product to make your home more tidy! Do you want to have a hidden entertainment system? This IR Repeater System Kit allows you to control home theater devices/components which are kept behind closet doors or

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (battery included)

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (as per new shipping policy from FedEx battery cannot include for power ship orders, all non power ship orders battery included)

IR Reciever and transmitter Description 1、Digital 38KHz IR Transmitter Sensor Description:  IR is widely used in remote control. With this IR transmitter, the Arduino project is able to transmit command to any IR remote Receiver if you have the right decoder.  Well, it will be also easy to make your own IR controller using IR Receiver.   38KHz IR Transmitter Sensor pin definitions : (1) Output (2) Vcc (3) GND  Features:  1、Basedon the 38KHz IR Transmitter Sensor  2、Can be used for remote control  3、Power Supply: 5V  4、Interface: Digital  5、Modulate Frequency : 38Khz  6、Pin Definitions: (1) Output (2) Vcc (3) GND  7、Can be compatible with Wrobot Digital 38KHz IR Receiver Sensor  8、Apply to a variety of platforms including Arduino/51/AVR/ARM      2、Digital 38KHz IR Receiver Sensor Description : IR is widely used in remote control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder. Well, it will be also easy to make your own IR controller using IR transmitter.   38KHz IR Receiver Sensor pin definitions : (1) Output (2) Vcc (3) GND  Features :  1、Based on the 38KHz IR Receiver Sensor  2、Can be used for remoter control  3、Power Supply : 5V  4、Interface : Digital  5、Modulate Frequency : 38Khz  6、Pin Definitions : (1) Output (2) Vcc (3) GND  7、Can be compatible with Wrobot Digital 38KHz IR Transmitter Sensor    Connecting Diagram:   ICA Package Info 1Set X 1pc Transmitter & 1 Pc Receiver Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

F&D FU Remote Control Specification: ·          Full Functional Remote. ·          Made with Premium Materials. ·          IR Led controller. ·          Numeric Keys. ·          Operation Distance Over 10 Meters. ·          Fluorescence Buttons. ·          Control Angle Over 120 Degrees. Details: ·          Light yet Durable- Made from fine Plastic material makes this remote more handy & durable. ·          Operate it

F&D F700U Remote Control Specification: ·          Full Functional Remote. ·          Made with Premium Materials. ·          IR Led controller. ·          Numeric Keys. ·          Operation Distance Over 10 Meters. ·          Fluorescence Buttons. ·          Control Angle Over 120 Degrees. Details: ·          Light yet Durable- Made from fine Plastic material makes this remote more handy & durable. ·          Operate it

F&D A111F Remote Control Specification: ·          Full Functional Remote. ·          Made with Premium Materials. ·          IR Led controller. ·          Numeric Keys. ·          Operation Distance Over 10 Meters. ·          Fluorescence Buttons. ·          Control Angle Over 120 Degrees. Details: ·          Light yet Durable- Made from fine Plastic material makes this remote more handy & durable. ·          Operate it

Tested with RaspberryPi XBMC Watch movies, view photos, and listen to music from your computer without having to touch your mouse or keyboard. This remote acts like a wireless mouse, but has the functionality to control your PC's media software. PCs are becoming our personal entertainment centers, the place where we store our music, movies, & photos. Now you can bring those files into your life without having to be at the computer all the time. USB PC Laptop Wireless Mouse Keyboard Remote Control Media Center Controller Wireless PC USB Windows Media Center Remote Infrared Ray Control Controller 18M.This computer remote controller can be used for listening music, watching movies, browse the web... USB port, plug and play, no need driver. Wireless mouse function. Support system: Support WIN98, WINME, WIN, WINXP, compatible with Windows MCE, WIN VISTA, WIN 7 operating systems and other operating systems. Compatible with almost all media player software. (WinDVD, RealPlayer, Winamp, MediaPlayer, PowerDvd, IE, Word, PowerPoint, etc.).

Dell SAS 6/IR Raid Controller New, pulled from new server. Never used. DP/N: 0JW063 WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

8 channel IR Remote Relay Board  iUB-8R-IR Now make any Light, Fan or  any electrical appliance remote control operated ! Yes, you can do this by using this little board !   Features - - Based on latest microcontroller. - 8 relay outputs for different kind of requirement. - 8 extra Open Collector outputs if you are not using relay. - potentially free NO & NC contact outputs - Momentary & Toggle mode selectable. - Long range - Easy to add remote control facility to many projects - Visual LED indication for correct IR signal reception. - Visual LED indication for each Relay. - Small & Compact size. Can be used for - - Switching lights & fans on & off at homes, offices, shops, hotels by remote. - Switching motors on & off. - Converting machines & equipment to be operated by IR remote. This board can be used with any Philips RC5 remote control handset or you can use our IR Remote Control Transmitter, which can be purchased separately from our Accessories Section. We have also IR infrared relay boards for 2,6,8 and 12 channels. For more technical information, please download  iUB-8R-IR User Manual   from our download section   http://iknowvations.in/downloads/.  . If you have any technical information, do write to our support team at support@iknowvations.in

Wireless 4 Channel Robot Control Kit With Dual DC Motor Drive 433Mhz RF  Best Quality @ Lowest Price Control your robot from remote using this 4 channel wireless remote control kit. Kit comes with one 4 channel wireless transmitter with push buttons on-board for sending commands to receiver unit to control the robot. Receiver unit comes with on-board L293D bidirectional dual DC motor driver. Simply Connect 9V battery to Transmitter and proper power source to receiver, connect two DC motors on receiver module and you are ready to control your two or four wheel drive robot within few minutes. You can easily control your robot reverse, forward, left & right. Description Transmitter Input Supply: 9V Battery Receiver Power Supply: 9 - 15 V DC through Battery OR Power Adapter DC Motor Output Channel: 2  Output Current Per Channel: 600 mA (Can Easily drive BO Motors OR Plastic Gear Robotic Motors) Address Selection: 8 BIT On-board DIP Switch RF Frequency: 433Mhz USE: Indoor & Outdoor Applications  Robot Controller, Wireless Remote Controller, Wireless Switching, Wireless Dual DC Motor Drive, DIY Robotic Kits:Package Includes: 1 X 4 Channel Wireless Transmitter 1 X 4 Channel Wireless Receiver With On-board Dual DC Motor Driver 1 X 9V Battery Clip (9V Battery Is not Included) For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller,

8 channel IR Remote Relay Board  iUB-8R-IRO 8 channel Relays + 9 Digital outputs. Now make any Light, Fan or  any electrical appliance remote control operated ! Yes, you can do this by using this little board !   Features - - Based on latest microcontroller. - 8 relay outputs for different kind of requirement. - 8 extra Open Collector outputs if you are not using relay. - 9 digital outputs. - potentially free NO & NC contact outputs - Momentary & Toggle mode selectable. - Long range - Easy to add remote control facility to many projects - Visual LED indication for correct IR signal reception. - Visual LED indication for each Relay. - Small & Compact size. Can be used for - - Switching lights & fans on & off at homes, offices, shops, hotels by remote. - Switching motors on & off. - Converting machines & equipment to be operated by IR remote. This board can be used with any Philips RC5 remote control handset or you can use our IR Remote Control Transmitter, which can be purchased separately from our Accessories Section. We have also IR infrared relay boards for 2,6,8 and 12 channels. For more technical information, please download  iUB-8R-IR User Manual   from our download section   http://iknowvations.in/downloads/.  . If you have any technical information, do write to our support team at support@iknowvations.in

iR-4C 4 channel IR Remote Relay Board  Rev-2.0 Now make any Light, Fan or  any electrical appliance remote control operated ! Yes, you can do this by using this little board !   Features - - Based on latest microcontroller. - Four relay outputs for different kind of requirement. - 3 extra Open Collector outputs. - potentially free NO & NC contact outputs - Momentary & Toggle mode selectable by DIP switch. - All On & All Off facility. - Long range - Easy to add remote control facility to many projects - Visual LED indication for correct IR signal reception. - Visual LED indication for each Relay. - Small & Compact size. Can be used for - - Switching lights & fans on & off at homes, offices, shops, hotels by remote. - Switching motors on & off. - Converting machines & equipment to be operated by IR remote. This board can be used with any Philips RC5 remote control handset or you can use our IR Remote Control Transmitter, which can be purchased separately from our Accessories Section. For more technical information, please download  iR-4C User Manual   from our download section   http://iknowvations.in/downloads/.  . If you have any technical information, do write to our support team at support@iknowvations.in

24 Key RGB LED/Strip Controller + IR Remote|| Best Quality || Affordable Price 24 Key RGB LED/Strip Controller + IR Remote|| Best Quality || Affordable Price You will get: 1x RGB Contoller Module 1x Remote. Do Provide a Feedback for us, As it would help us to give you our best Support and Service. Payment:- We Only Aceept PaisaPay Payments.  You Can Pay Through Credit/Debit Cards, Net Banking. Shipping:- We Ship through PowerShip So if your Region is not Covered under Powership, Sorry then we Can't Help You. Contact Before Giving any Negative / Neutral Feedback. Giving any Negative/ Neutral Feedback will not Solve your Problem. Therefore Try to Contact before, on any of the Below Mentioned Contacts / Messages. For any Queries Contact:-      Or                                                                                       Phone:-               Support Email:-     

Dear Buyer,   We maintain high standards of excellence and strive for 100% customer satisfaction. Positive feedback is very important to us, simply leaving negative or   neutral feedback can't solve the problem. If you have any questions, please contact us first, so that we can satisfactorily address your concerns.   Thank You   ########################### Product Description Starts ########################### Features: With 1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED. With 4 emitters which is used to send the signals to the two A/V components seperately.  3M cable between IR emitter and IR receiver connection port between IR receiver and IR emitter for extention cable. 5V USB Power Supply Required (Buyer has to arrange USB adapter). kHz operating range Easy Installation: 1. Stick the Receiver

Specification Working voltage: 5V Support: mp3/bluetooth/USB/FM/memory card/Mic slot/IR antenna slot/Big digital display/Big remote controller Excellent sound quality Can connect speakers directly Cheap and easy to install Remote for easy handling This is an all in one player and decoder module. This board consists of Bluetooth, FM with MIC Slot, Ir antenna slot, Big Digital Display, USB, MP3 Stereo Audio Player and Decoder Module with Big remote controller. The working voltage of this module is 5V DC. You can either use this board in your DIY project or you can connect two normal size speakers with it for audio amplification purposes. The body of the module is build-up of hard plastic. You only need to connect a speaker and a 5V DC current supply and the board is ready to go. So if you are looking for a module with so many features then this little buddy is the right choice for you.

This is a listing for 5 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 5 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 5 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 4 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 4 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote controller powered by 1 x 23A / 12V battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 3 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 3 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 3 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 3-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A)