Iv flashes transmitter

I am selling my portable lighting kit. All of these flashes are about 1 year old and have been treated with kid gloves. All the items are in almost new condition. I am selling them because I have recently bought bigger strobes and these ones are not being used anymore. Kit includes: 4 Yongnuo 560 IV flashes 1 Yongnuo 560 TX (Transmitter) I have the table top stands and the pouches that the flashes and transmitter came with, I also have the original boxes if you want them. If you are a photographer looking to get into flash photography, this is a good, cheap way to do it.

YONGNUO YN-560 IV Wrieless Speedlite Flash for Canon Nikon Camera / YN-560 III / RF-602 / RF-603 II / RF-605 / YN560-TX / YN-622C / YN-622N Wireless Transceiver Integrated - Fantastic with Three Controlling Groups   - Yongnuo 2.4GHz Speedlite YN560 IV. YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX, it has built-in trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter. Functions:                        Supports Wireless Master Function   -   The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.     Supports Wireless Slave Function, fully supports YN560-TX、RF-603（I/II）、RF-602 Wireless transmitter   -   One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.     Multiple Trigger Synchronous Mode Supported   -   The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.     Settings Save Automatically, Supports Custom Settings (Fn) -   The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.   GN58 @ ISOmm -   High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.     Sound Prompting System -   When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.   Support Electric Zooming Function   -   The flash coverage can be altered between mm through the [ZOOM] button.   Ultra fast Charging Recycle System, Supports External Power Supply     Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Features:                                                                                                                                                                                                                                     1)   TX Master Flash   Mode: - When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver. 2)   RX Slave Mode: - When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV (RX mode)and YN-560 III (RX mode), and also can be used with RF-602, RF-603 II, RF-605 together. 3)   Manual mode 4)   Multi mode 5)   S1 / S2 mode --- You should use those two modes off camera 6)   Power saving mode 7)   Overheating Protection 8)   Manually set and zooming position 9)   PC Synchronous Port Specification: Compatible for: -   ALL Canon Nikon Pentax Olympus DSLR Camera - Yongnuo RF-605, RF-603 II, RF-602, YN-622C, YN-622N, YN560-TX   - Yongnuo YN-560 III - Yongnuo Flash Battery Pack SF-17 C / SF-18 C

YONGNUO YN-560 IV Wrieless Speedlite Flash for Canon Nikon Camera / YN-560 III / RF-602 / RF-603 II / RF-605 / YN560-TX / YN-622C / YN-622N Wireless Transceiver Integrated - Fantastic with Three Controlling Groups  - Yongnuo 2.4GHz Speedlite YN560 IV. YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX, it has built-in trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter. Functions:                       Supports Wireless Master Function  -  The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.    Supports Wireless Slave Function, fully supports YN560-TX、RF-603（I/II）、RF-602 Wireless transmitter  -  One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.    Multiple Trigger Synchronous Mode Supported  -  The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.    Settings Save Automatically, Supports Custom Settings (Fn) -  The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.   GN58 @ ISOmm -  High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.    Sound Prompting System -  When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.   Support Electric Zooming Function  -  The flash coverage can be altered between mm through the [ZOOM] button.   Ultra fast Charging Recycle System, Supports External Power Supply    Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Features:                                                                                                                                                                                                                                     1)  TX Master Flash  Mode: - When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver. 2)  RX Slave Mode: - When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV (RX mode)and YN-560 III (RX mode), and also can be used with RF-602, RF-603 II, RF-605 together. 3)  Manual mode 4)  Multi mode 5)  S1 / S2 mode --- You should use those two modes off camera 6)  Power saving mode 7)  Overheating Protection 8)  Manually set and zooming position 9)  PC Synchronous Port Specification: Compatible for: -  ALL Canon Nikon Pentax Olympus DSLR Camera - Yongnuo RF-605, RF-603 II, RF-602, YN-622C, YN-622N, YN560-TX  - Yongnuo YN-560 III - Yongnuo Flash Battery Pack SF-17 C / SF-18 C hello buyer please leave positive feedback if you not statified this product so i will exchange it but you please not leave negative feedback       Octroi if applicable

Yongnuo YN560 IV Flash Speedlight for Canon Nikon Sony Pentax  This is the upgrade of YN-560 III flash speedlite. A YN560 IV equals a YN560 III + YN-560Tx Flash Controller. Place order now and get a   FLASH DIFFUSER   FREE!!! Compatible with: All cameras with ISO standard hot shoe. YN560IV= YN560III + YN560TX   Specification: YN-560 IV  Flash Speedlite is a combination of  YN-560 III  and  YN560-TX, it has built-in trigger system, so you can not only use it as  flash speedlite, but also a  flash controller Transmitter. Functions: Supports Wireless Master Function YN-560 IV can be used as master unit, provides  3 independent groups with controlling ability, realizing remote control the flash mode, flash output, and focal length of YN-560 IV and YN-560 III Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter One YN-560 IV can receive the wireless signal from YN560 IV, YN560-TX, RF-603 II and RF-602, with optical 16 channels.  When YN-560 IV and YN560-TX used as transmitter, it can realize remote control and parameter settings. Supports Multiple Trigger Synchronous Mode  It can be triggered through the flash mounted on the camera, 2.4G wirless triggering system, S1 and S2 pre flash cancel mode. Supports setting save automatically, custom settings (fn) GN58@ISOmm (M / MUlti mode) Supports ultra-fast charging recycle system, External power suppl y. Features: a,  TX Master Flash mode: When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV (RX mode)and YN-560 III (RX mode), and also can be used with RF-602, RF-603 II, RF-605 together. b,  RX Slave Mode: When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver. c,  Manual mode d,  Multi mode e,  S1 / S2 mode  --- You should use those two modes off camera f,  Power saving mode g,  Overheating Protection h,  Manually set and zooming position g,  PC Synchronous Port Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 58 meters (ISO mm) Flash mode M, Multi Triggering Mode Camera set-up, TX, TX, S1, S2 Zoom range mm Vertical rotation angle -7~90 degrees Horizontal rotation angle degrees Power supply 4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature k Flash time s~s Flash control 8 levels of output control ( levels of fine tuning External interface hot shoe, PC port and eternal charging port. Wireless triggering distance g wireless);m indoor,m out door (optical control) Additional features The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options.

Specification: YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX,, it has built-in wireless trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter. Functions: Supports Wireless Master Function YN-560 IV can be used as master unit, provides 3 independent groups with controlling abiligy, realizing remote control the flas mode, flash output, and focal length of YN-560 IV and YN-560 III Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter One YN-560 IV can receive the wireless signal from YN560 IV, YN560-TX, RF-603 II and RF-602, with optical 16 channels. When YN-560 IV and YN560-TX used as transmitter, it can realize remote control and parameter settings. Supports Multiple Trigger Synchronous Mode It can be triggered through the flash mounted on the camera, 2.4G wirless triggering system, S1 and S2 pre flash cancel mode. Supports setting save automatically, custom settings (fn) GN58@ISOmm (M / MUlti mode) Supports ultra-fast charging recycle system, External power suppl y. Features: a, TX Master Flash mode: When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV (RX mode)and YN-560 III (RX mode), and also can be used with RF-602, RF-603 II, RF-605 together. b, RX Slave Mode: When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver. c, Manual mode d, Multi mode e, S1 / S2 mode --- You should use those two modes off camera f, Power saving mode g, Overheating Protection h, Manually set and zooming position g, PC Synchronous Port Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 58 meters (ISO mm) Flash mode M, Multi Triggering Mode Camera set-up, TX, TX, S1, S2 Zoom range mm Vertical rotation angle -7~90 degrees Horizontal rotation angle degrees Power supply 4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature k Flash time s~s Flash control 8 levels of output control ( levels of fine tuning External interface hot shoe, PC port and eternal charging port. Wireless triggering distance g wireless);m indoor,m out door (optical control) Additional features The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options.

Yongnuo 2.4GHz wireless manual Speedlite flash YN560 IV Wireless Transceiver Integrated   Fantastic with Three Controlling Groups                                 ----Yongnuo 2.4GHz Speedlite YN560 IV   *Supports Wireless Master Function  The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.    *Supports Wireless Slave Function, fully supports YN560-TX、RF-603（I/II）、RF-602 Wireless transmitter  One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.    *Multiple Trigger Synchronous Mode Supported  The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.    *Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.   *GN58 @ ISOmm High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.    *Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.   *Support Electric Zooming Function  The flash coverage can be altered between mm through the [ZOOM] button.   *Ultrafast Charging Recycle System, Supports External Power Supply    *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface

Yongnuo YN560IV Flash Speedlight for Canon Nikon Pentax Olympus This is the upgrade of YN-560III flash speedlite.And YN560IV equal a YN560III plus a YN-560TX flash controller. Comes with six month seller warranty Features: Yongnuo 2.4GHz Speedlite YN560 IV Wireless Transceiver Integrated   Fantastic with Three Controlling Groups                                 ----Yongnuo 2.4GHz Speedlite YN560 IV                                                             *Supports Wireless Master Function                      The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.                                            * Supports Wireless Slave Function, fully supports YN560-TX、RF-603（I/II）、RF-602 Wireless transmitter                      One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.                                            *Multiple Trigger Synchronous Mode Supported                      The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.                                            *Settings Save Automatically, Supports Custom Settings (Fn)                     The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.                                           *GN58 @ ISOmm                     High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.                                            *Sound Prompting System                     When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.                                           *Support Electric Zooming Function                      The flash coverage can be altered between mm through the [ZOOM] button.                                           *Ultrafast Charging Recycle System, Supports External Power Supply                                            *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface                     Circuit design   Insulated Gate Bipolar Transistor (IGBT) Guide No.   58 (ISO mm) Flash mode  M.MULTI Triggering Mode Camera Set-up,S1,S2,RX,TX Zoom range   mm Vertical rotation angle  -7~90 degrees Horizontal rotation angle degrees Power supply  4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times  times (AA alkaline cell used) Recycle time  approx 3s (AA alkaline cell used) Color temperature   k Flash time     s~s Flash control 8 levels of output control ( levels of fine tuning External interface  hot shoe, PC port and eternal charging port wireless trigger distance 100m(2.4G wireless);m indoor, outdoor(Optical control) Additional features the electronic flash head zooming,Sound prompt,PC syn,Power saving mode,Overheating protection and saving settings.   Dimensions    mm (Extended state) Net weight  380g

Product Description The YONGNUO Speedlite Transmitter YN-E3-RT is a transmitter for wireless flash flash shooting. It can control up to 5 groups (15 units) of Speedlites that have a wireless multiple flash shooting function using radio transmission.  The transmitter also has dust and water resistance equivalent to EOS-1D series cameras.  Functions:  1.Two-way 2.4G radio communication, fuly compatible with ST-3E-RT/600EX-RT  2.15 Physical Channels, 1 Auto Channel, Up to customizable photographer ID  3.Transmission Range: 100M  4.Multi YN-E3-RT can share slave flashes  5.Display group/charge status of slave flashes  6.Firmware can be upgraded via USB  7.High resolution Dot-Matrix LCD, Backlight for LCD/keys  8.Fast lock mechanism  9.Built-in AF assist beam emitter, buzzer  10.Remote shutter release, Linked Shot (Need extra shutter cable for cameras released before .Flash Mode: ETTL/M/Multi/GR 4 flash modes  12.A/B/C/D/E 5 groups  13.Supports 1st Curtain, 2nd Curtain (Only

New and unused Yongnuo YN560 IV Speedlite Wireless Flash with Master First-est recycling time then Canon 600EX-RT or Nikon 910 Highlights Wireless Transceiver Integrated Fantastic with Three Controlling Groups Supports Wireless Master Function: The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. Supports Wireless Slave Function, fully supports YN560-TX / RF-603(I/II) / RF-602 Wireless transmitter: One YN560 IV can respectively receive the wireless signal from YN560 IV / YN560-TX / RF-603 (I/II) / RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. Multiple Trigger Synchronous Mode Supported: The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.

Canon EOS 5D Mark IV Digital SLR Camera - EF 24-105mm f/4L IS II USM::::::600 Euro New wireless multiple flash system using radio wave communication for enhanced control of up to five groups of flashes *Zoom flash head covers wide range of 20-200mm; maximum Guide Number (197 ft./60mat ISO 100). *Redesigned contact construction, improved flash head durability, and exceptional dust and weather resistance for reliable operation. *AF Assist Beam compatible with Canon's new 61-Point High Density Reticular AF. *Dot matrix LCD panel and backlit button provide easy visibility. *Color filter holder for attaching Canon and third-party color gelatin filters. *18 Custom Functions and 7 Personal Functions for creative flexibility. *Full swivel For more info Contact Us Below Skype:::;:lvaro_j009 Email::::::puresport.ticketssale@gmail.com

Canon EOS 5D Mark IV Digital SLR Camera - EF 24-105mm f/4L IS II USM New wireless multiple flash system using radio wave communication for enhanced control of up to five groups of flashes *Zoom flash head covers wide range of 20-200mm; maximum Guide Number (197 ft./60mat ISO 100). *Redesigned contact construction, improved flash head durability, and exceptional dust and weather resistance for reliable operation. *AF Assist Beam compatible with Canon's new 61-Point High Density Reticular AF. *Dot matrix LCD panel and backlit button provide easy visibility. *Color filter holder for attaching Canon and third-party color gelatin filters. *18 Custom Functions and 7 Personal Functions for creative flexibility. *Full swivel For more info Contact Us Below I look forward to hear from you soon. Senior Business Consultant Team [Global Store Inc]

Neewer® FT- Channels Wireless Power Control Flash Receiver for AD180 AD360 Speedlite Product Features Compatible with: AD180 AD360 Flash Transmit frequency: 433MHz wireless remote system Channel: 16 Receiver power supply: 5V (Powered by flashes) Workable distance: 50m (open areas) Description Wireless control -Each flashgroup can be set to 16 different power levelszSetting flash power on/off, power levle, modeling light on/off, buzzer on/off, and flash triggering. Remote power adjustment -Each flashgroup can be set to 16 different power levels. Flash grouping -Firing at most 16 group of flashes for creative photography. One-for-Multiple - Flexible combinations of one transmitter and multiple receivers. Specifications: Compatible with: AD180 AD360 Flash USB interface Receiver power supply: 5V (Powered by flashes) Transmit frequency: 433MHz wireless remote system Channel: 16 Workable distance: 50m (open areas) Control on flashes: -Flash output power -Modeling light on/off -Buzzer on/off -Flash triggering Max sync speed: s Note: This FT-16 Wireless Flash Receiver is a part of "FT-16 Flash Trigger" and can not use separately. Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer CellsII-N All-in-One High Sync Speed Wireless Transceiver (2 pcs) Neewer GodoxCellsII-N All-in-One High Sync Speed Wireless Transceiver Single Studio Flash StrobeTrigger Transceiver / Remote Shutter Release for Nikon DSLR Series, Witstroseries, Godox V850 V860 etc. (2 pcs) Features: Single transceiverdesign, could be used as either a transmitter or a receiver. Could be used as a wirelesstrigger of studio flash, speedlite and also a wired or wireless camera shutterrelease (Normal Shooting & Long Exposure Shooting). Super high sync speed up tos, meets the need of high sync photography. 16 non-interfering optionalchannels enable you to control multiple flashes synchronously. This kit includes two sametransceivers for Nikon DSLR Series, Witstro series, Godox V850 V860 etc.   Descriptions: This is one receiver of GodoxCelles II set. It can be used as a wireless transmitter or a receiver forstudio flash, speedlite, and camera shutter. Featuring multi-channeltriggering, stable signal transmission, and sensitive reaction, it givesphotographers great flexibility and control. Fashion

Neewer CellsII-C All-in-One High Sync Speed Wireless Transceiver (2 pcs) Neewer GodoxCellsII-C All-in-One High Sync Speed Wireless Transceiver Single Studio Flash StrobeTrigger Transceiver / Remote Shutter Release for Hotshoe-mounted Canon EOSSeries Cameras (2 pcs)   Features: Single transceiverdesign, could be used as either a transmitter or a receiver. Could be used as a wirelesstrigger of studio flash, speedlite and also a wired or wireless camera shutterrelease (Normal Shooting & Long Exposure Shooting). Super high sync speed up tos, meets the need of high sync photography. 16 non-interfering optionalchannels enable you to control multiple flashes synchronously. This kit includes two sametransceivers for hotshoe-mounted Canon EOS series cameras.   Descriptions: This is one receiver of GodoxCelles II set. It can be used as a wireless transmitter or a receiver forstudio flash, speedlite, and camera shutter. Featuring multi-channeltriggering, stable signal transmission, and sensitive reaction, it givesphotographers great flexibility and control. Fashion

Neewer CellsII-N All-in-One High Sync Speed Wireless Transceiver Neewer GodoxCellsII-N All-in-One High Sync Speed Wireless Transceiver Single Studio Flash StrobeTrigger Transceiver / Remote Shutter Release for Nikon DSLR Series, Witstroseries, Godox V850 V860 etc Features: Single transceiverdesign, could be used as either a transmitter or a receiver. Could be used as a wirelesstrigger of studio flash, speedlite and also a wired or wireless camera shutterrelease (Normal Shooting & Long Exposure Shooting). Super high sync speed up tos, meets the need of high sync photography. 16 non-interfering optionalchannels enable you to control multiple flashes synchronously. Applies to Nikon DSLR Series,Witstro series, Godox V850 V860 etc.   Descriptions: This is one receiver of GodoxCelles II set. It can be used as a wireless transmitter or a receiver forstudio flash, speedlite, and camera shutter. Featuring multi-channeltriggering, stable signal transmission, and sensitive reaction, it givesphotographers great flexibility and control. Fashion