Led pic

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Product Description: ·          5V 4-Channel Relay interface board ·          IC based  switching ·           Supply 12V DC and 5 V DC for control. ·           High power relays for each channel: 250V 10A AC ·           Indication LED for each output  Standard interface that can be controlled directly by micro controller (Arduino, , AVR, PIC, DSP, ARM)   Application: Application for automation  purpose Package contain: 1 X 4-Channel Relay interface   = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

New AMSV Power Supply Module 3.3V Arduino PIC ARM DSP Product information Feature:     Input Voltage:4.5~7VDC     Output Voltage:3.3V     Output Current:800mA(Load Current can't be more than 800mA)     PCB Size:25mm*11mm     with Power LED (Red)     Weight:about1.6g Package Include:   1-pc AMSV Power Supply Module 3.3V power Supply Module Rs. 145 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Description IR Infrared Obstacle, Proximity, Line following sensor module for Arduino, PIC by MatLogix Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

P531 -  from India's no.1 LED Projector Brand LIFE LONG LAMP (UP TO hrs) P531 PROJECTOR with ANDROID 4.2.2 SPECIFICATIONS Light Engine Projector Type LED Lamp - LCD Panel Light Source Type LED Lamp Light Source Life Up to hours Design Sealed Optical Engine - Dust proof design, made for India Performance Brightness at Source Lumens* ANSI (apprx) 500 Native Resolution HD 720P WXGA X800 Support Resolution i,p  3 D 3D Optimized Light Engine (Anaglyph Only) Aspect Ratio 16:9 Native, switch freely b/w 4:3 Contrast Ratio Projection Size 40” to 200” inches Projection Distance 1m to 5m Focusing Keys tone Manual Focus 15 degree Power/voltage range V Power Consumption Connectivity VGA Yes AV (Video) Yes TV Tuner (Analog) Yes YPbPr (Component) Yes S-Video N/A Audio In Yes (RCA) Audio Out Yes (RCA) HDMI Yes (Two) USB Yes Two (up to 1 TB support for multi format video, audio, pic & text) Micro SD Slot YES Wifi YES. b/g/n wifi 5 to 8 mtr wifi range LAN YES Special Speaker Yes (Inbuilt) OS ANDROID 4.2.2 CPU A20 DUAL CORE RAM 1 GB RAM ROM / Storage 4GB Internal Storage (expandable to 32GB through ext SD slot) Bundle Attachment AV & VGA Cable Yes HDMI Cable Yes Manual Yes Warranty 1 Year Remote Control Yes

it's 9 watt LED Eveready product,2 year guarantee and & offer product with 2 pic.

AMSV Power Supply Module 3.3V power Supply Module Product information Feature:     Input Voltage:4.5~7VDC     Output Voltage:3.3V     Output Current:800mA(Load Current can't be more than 800mA)     PCB Size:25mm*11mm     with Power LED (Red)     Weight:about1.6g Package Include:   1-pc AMSV Power Supply Module 3.3V power Supply Module

Modal Number- Dell P2211H Price is fixed and final so if you interested in same price theen contact me. Don't give your any offer.fixed price.IF you give any chip offer i will not give any replay. 100% Working and tested 1 Mounth full warranty. All Intel/AMD board,Cpu Available All other parts of computer and laptop also Available in very chip price(.Like SSD ,Nvme psu,gpu etc) If you want build new or old gaming or normal pc theen itz available in very chip price. We Provide 100% Geniune and Trusted Product. More details plz call or whatsapp. Contact no given in the profile pic

3.2'' TFT LCD Touch Shield for Arduino Mega compatible SAME DAY SHIPPING 100% TESTED PRODUCT, SATISFACTION GUARANTEED. Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Company Name: Naksh Researcher & Designer Centre Company Type: Hardware & Software Design in Electronics & Electrical Company Service Area: Microcontroller Based Electronics Projects, Readymade Electronics & Electrical Projects, Electronics IEEE Projects, Electronics Project list, , AVR, PIC Microcontroller, GSM, RFID, DTMF, Robotics, Touch Screen Based Projects, Real Time Electronics Projects, Final Year Electronics Projects, Major & Minor Electronics Projects Electronics & Communication Engineering Projects, Electronics & Electrical Engineering Projects, Electronics Hardware & Software Projects Final Year Major & Minor Projects Field 1. RFID Based Projects 2. DTMF Based Projects 3. GSM Based Projects 4. GPS Based Projects 5. Display Based Projects 6. Robotics Based Projects 7. Remote Control Based Projects 8. Wireless Control Projects 9. Zigbee/Bluetooth Projects 10. Automation Projects 11. Security & Surveillance Projects 12. SCADA Based Projects Keywords Microcontroller , AVR, PIC, LCD, Sensors, Relay, LED, Rectifier, Potentiometer, Resistance, capacitor, Memory, RAM, ROM, UART, RS232, SPI, ADC, Temperature, Accelerometer, RS485, CAN, LIN, I2C, Robotics, GSM 900A, SIM300, GPS, DTMF, Antenna, Wireless, RF Module, Bluetooth, DC motor, stepper Motor, Power supply, regulators etc If you have any idea for any project please feel free to contact us. Contact No: (Mobile), (Land Line)

3.2'' TFT LCD 240x400 HD Touch Shield compatible with Arduino Mega Software driver Library AVR included. Product Summary: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. 3.2” Diagonal display 240x400 Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x400 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC HXA Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm               Features: v   240x400 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive LCD with arduino mega card v   Powerful   HXA controller with 240x400 screen resolution.     Package Include: v   A 3.2” LCD TFT 240x400 touchscreen display attached adaptor PCB with SD slot. v   A plastic container box. v   A stand-alone software library(ATmega32)-zip file via e-mail.   Shipping Details: Our preferred shipping partners are                              Indian speed post Testimonial s: v     we never dispatch even a single product without testing at our facility, watch what our customers say about us at our feedback profile Feedback v     In case you find any problem

3.2'' TFT LCD Touch Shield for Arduino Mega compatible     Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one

For sale broken screen n touch Bsnl Penta tab single sim calling edge with box. Nothing viewable on screen. Price Rs gb RAM, 8 GB MEMORY 3d glasses, dairy case & bill with hdmi port and wire. Currently using with LED tv through hdmi cable (attached is the LED tv pic where tab is showing attached through HDMI) & mouse is working perfectly on it.

Light Engine Projector Type LED - DLP Light Source Type 3 X LED (RGB) Light Source Life Up to hours Design Sealed Optical Engine - Dust proof design, made for India Performance Brightness at Source Lumens* ANSI (apprx) 400 Native Resolution HD 720P WXGA X800 Support Resolution i,p  3 D FULL 3D with Converter (2D to 3D) -Active shutter Aspect Ratio 16:9 Native, switch freely b/w 4:3 Contrast Ratio Projection Size 40” to 120” inches Projection Distance 1m to 4m Focusing Keys tone Manual Focus / Auto Keys tone correction upto 40 degree Power/voltage range V Power Consumption Connectivity VGA Yes AV (Video) Yes,3.5 mm Audio In Yes (3.5 mm) Audio Out Yes,3.5mm HDMI Yes X 2 USB Yes (upto 1 TB support for Multi format video, audio, pic & text) Special Speaker Yes (Inbuilt) Bundle Attachment AV & VGA Cable Yes 1.5 mtr each HDMI Cable Yes 1.5 mtr Manual Yes Warranty 6 months 3D Glass Active Shutter glass (optional, to be purchased separately) Remote Control Yes Physical Color Black Misc. Weight (w/o packing) 700 gm (projector only) & 1.9 kg with packing Dimensions (product) 16 x 11 x 3 (product L x W x H w/o packing

Light Engine Projector Type LED - DLP Light Source Type 3 X LED (RGB) Light Source Life Up to hours Design Sealed Optical Engine - Dust proof design, made for India Performance Brightness at Source Lumens* ANSI (apprx) 300 Native Resolution HD 720P WXGA X800 Support Resolution i,p  3 D FULL 3D with Converter (2D to 3D) -Active shutter Aspect Ratio 16:9 Native, switch freely b/w 4:3 Contrast Ratio Projection Size 40” to 120” inches Projection Distance 1m to 4m Focusing Keys tone Manual Focus / Auto Keys tone correction upto 40 degree Power/voltage range V Power Consumption Connectivity VGA Yes AV (Video) Yes,3.5 mm Audio In Yes (3.5 mm) Audio Out Yes,3.5mm HDMI Yes X 2 USB Yes (upto 1 TB support for Multi format video, audio, pic & text) Special Speaker Yes (Inbuilt) Bundle Attachment AV & VGA Cable Yes 1.5 mtr each HDMI Cable Yes 1.5 mtr Manual Yes Warranty 6 months 3D Glass Active Shutter glass (optional, to be purchased separately) Remote Control Yes Physical Color Black Misc. Weight (w/o packing) 700 gm (projector only) & 1.9 kg with packing Dimensions (product) 16 x 11 x 3 (product L x W x H w/o packing

Package Contents 1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has one (1) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free wheeling diode which will further protect your microcontroller from relay kick back. This is a 12V 1-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Free wheeling diode to protect your microcontroller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers,  such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc.... ***(Work with All Analog/Digital circuits with signal from 1.5V to 15V) ***   Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 1.8V,3.3v and 5v micro controller  (Check Other Listings  for  3.3V,5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 1.5V to 16V with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 1.8V, 3.3V and 5V micro controllers/Digital).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

UC40 specifications for reference Image System TFT LCD Color 16.7K Brightness 60ANSI(800lumens)Keystone Correction ±15°  Contrast Ratio Power Supply v HZ Native Resolution Power Comsuption 55W(Max)  Supported Resolution Input USB/SD/HDMI/IP/IR Lamp LED Output 3.5mm earphone Lamp life 20K hours Speaker 8Ω2W Lens F=125  System Multimedia Operation Mode Manual Language Supported Chinese,English etc.23languages Projection distance  M Product Size 201mm*153mm*67.5mm Projection size " N.W. 1kg Aspect Ratio Others Multi-functions  Video 3GP(H263,MPEG4)/AVI(XVID,DIVX,H264) /MKV(XVID,DI VX,H264)/FLV(FLV1)/MOV(H264)/MP4(MPEG4,AVC)/MP G(MPEG1)/VOB(MPEG2)/RMVB(RV40)  Audio MP3/WMA/ASF/OGG/AAC/WAV Pic JPG/PNG/BMP

3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT    transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm

Features The is a 5V 8-Channel Relay interface board with optocoupler which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSC, and so on. Can be powered by 5V DC Source (From USB) Or from the same source powered to Arduino or any other micro controller. Equipped with high-current relay 10A@250 VAC / 10A@28 VDC which can control both AC and DC appliances such as Solenoids, Motors, lights, fans etc High quality screw terminals provided for each relays (C, NC, NO) for quick and easy connection Interfaced with optocouplers to isolate relays & protect your microcontroller. Input Signal Pin connected to Burg stick for easy accessibility LED Status indicators to indicate the relay ON/OFF status. Dimension: 13.4 x 5.3 x 1.7cm (5.28 x 2.09 x 0.67in) Mounting holes provided Shipping contents 1 x 5V DC 8 Channel relay board as shown

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

About: Have a Micro-controller and a development board(Arduino, Freeduino, , AVR or PIC), But having a hard time with no components OR finding components? Right here! is the solution.  This "Micro-controller components kit" includes all the components needed to learn all the basics about the micro-controller you have. NOTE:  This kit does NOT include any Development Board, Instead it has components needed to learn about micro-controllers.  Package includes: Product Quantity 01.  Battery snap .  DC jack(9V) .  B read-board(Medium sized with 640 tie-in Points) .  Motor w/ Fan 01 each 05.  Potentiometer(pot - 22kOhm) .  Capacitors(100uF, 22uF, 10uF and 1uF) 05 each 07.  LED's(White, Red, Green and Blue) 05 each 08.  IR pai r(IR-Emitter and IR-Sensor) 02 each 09.  7-segment display .  Push buttons    .  Transistors(BC547 and BC each 12.  LDR(Light Dependent Resistor - also called Photo-resistor) .  Regulator( and LM each 14.  Resistance box(all standard values - Upto 20 different values)     01 box 15.  LCD display(16x.  F-F wires(4 different colors) 05 each 17.  Single strand wires(5 different colors) 03 each

IR-Photodiode Sensors Array- for Line following robot (LFR) and micro-mouse robot  (Digital out, Independent Sensor Adjustable) Ideal for LFR (line-follower Robot) obstacles avoiding robots obstacles chasing robot side wall sensor maze solving robots Can be interface with ,Microchip PIC,AVR,Arduino etc. highly Sensitive Special:  Output Indicator LED for each Sensor signals              It Gives “HIGH” on detecting White/Light color surface SHIPPING: FAST SHIP BY  FEDEX   BLUEDART ARAMEX   100% transit insurance and refunds if lost by bluedart / aramex or fedex (courier will be automatically assigned by –