Lighting control sensors

EControl Devices is one of the most reputed distributors of Lighting control PIR Sensors, PIR Motion Sensors, and other Lighting control Sensors in India

Description We are supplier of Control Relay Panels located in Mohali and its more products these panels are used for the control & monitoring of electrical equipments available with quality-assured products.

LT-600 Lighting Control System is one of our video display control system. It displays WiFi support for wireless transmission. LTECH LT-600 can be connectd to any DMX console to form a lighting control network, which is compatible with the DMX protocol. One of the most important functions is that it supports off-line media storage with a 2GB SD card. Lastly, it can also be used to control pixel lighting and create pixel lighting effects. To Know More Click Here https://ltech.in

PIR Sensor  –  Ceiling Mounted 360 Degree, 12 Meter Distance Coverage (Very sensitive and Accurate) (with Built in  Adjustable  Timer, LUX Control  & Sensitivity  ) PIR stands for Passive InfraRed. In simple terms, it's a motion detector.     PIR Sensor working Principle: Passive infrared (PIR) sensors   react to the infrared heat energy emitted by people. PIR sensors   are passive devices

This unit is a robust, powerful and an intelligent system which facilitates the identification of upto 128 lighting circuits, which can be dimmed individually. Typical Crestron iLux dimmers cost Rs. 48,000 for just 6 lighting circuits!! This is now on sale, as we instead decided to install a Lutron Lighting System for almost 12 Lac!:-(This intelligent interface is a DALI® interface that provides control of up to 2 individual DALI loops. Conveniently housed in a DIN-rail enclosure, the module is a great low-profile unit which fits into convenient spaces. In addition to controlling the DALI data bus, it includes an integrated DALI power supply. Single-wire connectivity simplifies both new and retrofit installations, and Power-over-Ethernet (PoE) versatility assists in situations with existing CAT5 infrastructure. Two DALI Channels: The dual-channel DALI outputs on the unit makes controlling up to 128 individual DALI ballasts easy. The Digital Addressable Lighting Interface (DALI) is a protocol used for the control of lighting in buildings and is found on ballasts available from many manufacturers. Since it offers ballast-level control, lighting loads powered from the same feed can be controlled individually. DALI is a great choice for retrofit lighting systems because it does not require changes in line voltage wiring. Likewise, DALI provides ultimate flexibility by allowing reconfiguring of zones after a system is installed. Integrated DALI Power Supply: The innovative design of the unit eliminates the need for the external power supplies required by other DALI controllers on the market. Power is delivered via PoE or Cresnet, creating a true single-wire installation. Both Cresnet and PoE are capable of powering all 128 DALI ballast controllers. If desired, an external power supply may be used in conjunction with the unit. An on-board switch allows the installer to choose the required mode during setup. Commissioning Tool: Designed specifically for this module, the Crestron DALI commissioning software tool facilitates system setup. The intuitive menu-driven wizard provides step-by-step configuration of ballast properties, groups, and scenes. Guided by the software, one can simply set the ballast address and check connectivity status, edit minimum/maximum levels and fade time, and change ballast groupings and scenes. This powerful software makes ballast replacement straightforward through automatic identification of new hardware IDs. Familiar Programming Interface: Controlling a DALI ballast is just like controlling any Crestron dimmer. Familiar visual Crestron configuration tools, as found in D3 Pro® and SIMPL™ Windows, replace complex hardware addressing and communication protocols. Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional. Override Input: An override input is provided to allow an external contact closure to momentarily override the control system program and force each ballast into its defined "System Failure Level." States can be set and saved locally from the front panel, or remotely via software. DIN Rail Installation: The unit is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When the unit is installed in an enclosure utilizing 45 mm cutouts, the front panel stays accessible while the connections are concealed. Cresnet® and PoE: The unit communicates with a Crestron Automation Processor via the Cresnet control network or Power-over-Ethernet (PoE). A pair of Cresnet ports on the DIN-DALI-2 allows for easy daisy-chaining of several DIN Rail Series automation control modules. A standard Ethernet jack accommodates data and power to be delivered to the unit over one CAT5 cable

PIR motion sensor is a versatile electronic device that has become a staple in various industries. By measuring changes in infrared radiation levels within its detection range, this innovative sensor can accurately detect even the slightest movements. From security systems to automatic lighting controls, the applications of PIR motion sensors are vast. With their ability to effectively monitor and respond to motion, these sensors have revolutionized the way we interact with technology, making our lives safer and more convenient. For know more visit our website: https://econtroldevices.com/product/pir-motion-sensor-for-li ghting-and-devices/

Automatic Water level controller plays vital role in switching on/off the motor and serves 24 hours. Supply water to you without letting the overhead tanks to become dry Automatic Water level controller is a top class product that meets every performance criteria. Automatic Water level controller shows clear indication of water levels in the overhead tank and sump tank. Automatic Water level controller shows voltage variation if any, Automatic Water level controller shows green indicator for normal voltage, red indicator for high or low voltage, Has soft touch buttons to select auto / manual operations, Shows Motor ON indication with different colours at different modes of the unit. Automatic Water level controller shows Green indication in case of Auto mode, Red indication while Motor is under dry run Condition. No Manual Supervision, Feather Touch Keys, Avoids Motor Burn Outs, Increases storing capacity. Long life sensors, No mechanical parts, Low sensors replacement cost. BENEFITS OF THE PRODUCT: ? Three Year’s Warranty. ? Increases Your Motor Life. ? Works On Low & High Voltages. ? Easy Installation & Cost Effective. ? Avoid Seepage Of Water On Roofs. ? Walls Don’t Become Damp & Dirty. ? No Fear Even If You Are Not At Home. ? Works On All Types Of Motors & Pumps. ? Fits For All Types Of Water Storage Tanks. ? Save Your Electricity Bill, Water, Time & Energy. ? Water Always On Top Of Over Head Water Tank. ? Over Head Water Storage Tank Will Never Over Flow. ? No Need To See Water Level In Over Head Water Tank. ? Detects Water Levels In Over Head Water Tank & Sump. ? Glows Light When Motor Starts and Water Flows In Pipe. ? Controls Automatically Desired Water Level In Water Tanks. ? Automatically Switches OFF Motor When Water is Full In Over Head Tank or Sump Is Empty ? Automatically Switches OFF The Motor When Over Head Tank Is Empty & Sump Is Empty. ? Automatically Switches ON Motor When Water Is Low In Over Head Tank & Sufficient Water n Sump. ? Piece to Piece Replacement Sun Shine Electronics, H.No: 5-5-35/132, Plot NO:169, Prashanthi Nagar, Near Amma Mess, IDA Kukatpally, Hyd-72. Telangana. Mobile: 9010004145

Automatic Water level controller plays vital role in switching on/off the motor and serves 24 hours. Supply water to you without letting the overhead tanks to become dry Automatic Water level controller is a top class product that meets every performance criteria. Automatic Water level controller shows clear indication of water levels in the overhead tank and sump tank. Automatic Water level controller shows voltage variation if any, Automatic Water level controller shows green indicator for normal voltage, red indicator for high or low voltage, Has soft touch buttons to select auto / manual operations, Shows Motor ON indication with different colours at different modes of the unit. Automatic Water level controller shows Green indication in case of Auto mode, Red indication while Motor is under dry run Condition. No Manual Supervision, Feather Touch Keys, Avoids Motor Burn Outs, Increases storing capacity. Long life sensors, No mechanical parts, Low sensors replacement cost. BENEFITS OF THE PRODUCT: ? Three Year’s Warranty. ? Increases Your Motor Life. ? Works On Low & High Voltages. ? Easy Installation & Cost Effective. ? No Fear Even If You Are Not At Home. ? Fits For All Types Of Water Storage Tanks. ? Save Your Electricity Bill, Water, and Time & Energy. ? Water Always On Top Of Over Head Water Tank. ? Over Head Water Storage Tank Will Never Over Flow. ? No Need To See Water Level In Over Head Water Tank. ? Detects Water Levels In Over Head Water Tank & Sump. ? Glows Light When Motor Starts and Water Flows In Pipe. ? Controls Automatically Desired Water Level In Water Tanks. ? Automatically Switches OFF Motor When Water is Full In Over Head Tank or Sump Is Empty ? Automatically Switches OFF The Motor When Over Head Tank Is Empty & Sump Is Empty. ? Automatically Switches ON Motor When Water Is Low In Over Head Tank & Sufficient Water in Sump ? Piece to Piece Replacement. Thanks & Regards Sun Shine Electronics, 103, Prashanth nagar, Kukatpally, Hyderabad-072 9010004145

Remote Control Wireless Lighting Switch On Off Dimmer Systems For Home Office One Fan Three Tubelights/Lamps By i Lite • Remote Control Wireless Lighting Switch On Off Dimmer Systems For Home Office Fan Tubelight Lamp By i Lite • Remote & Manual ON / OFF Switching, Key Press Indicator, Saves Electricity, Electroni Switching Without Sparking • Single Button All Switches ON / OFF, Can Fitted

We deal with Electronic based security products such as, CCTV Access control systems Time Attendance Fire Alarm System. Renewable Energy Power solutions. (Solar & Wind) Electronic Moving Message Display. Payroll Software. All types of Sensors Control Panels. & ID cards. Please feel free to contact us. Thanks & Regards, Achutha.T, Godspeed Enterprises

Color:Green/Red/Yellow/Blue Size:51cm*23cm Battery:400mh Lead Acid Battery Material:HIPS Rated Power:50Hz~60Hz Charging Voltage:AC110V~220V Working Voltage:=2500V Plug:flat/round 20' Container:173ctns/10380PCS 40' Container:360ctns/21600PCS Min Order *Unit Price 5000PCS US $ 1.88 10000PCS US $ 1.80 our advantage: 1,our material the raw material in our factory is a new pure plastic particlt (100%) .Products made from this kind of material are sturdy, shockproof and durable .The electric mosquito swatter is smooth and odorless. After being dropped from 50 centimeter high several times, our product still functions without any cracks .there are some mosquito swatter made from second-hand recycling materials. This kind of material is much cheaper than ours . It can save half the cost .The electric mosqutio made of this kind of material is ugly,tough and smelly 2,the battery in electric mosquito swatter is similar to that in storage battery car it has a large capactiy , and thus you can use it for a very long tim after being chareged up: its lifetime is at least three years .however ,the rechargeable battery in the cheap elcetric battery swatter is always of poor quality, and its price and weight is only halft the lead-acid accumulator 3,Extra protection, more piece of mind The wet in our electric mosquito swatter is coated with a special substance in case that it gets rusty and it has a leakage of electricity. In many times, a trivial security problem is like a hidden danger, likely to cause an accident. 4,Safety of product design: the plug, handle and rigging screw can be tested for a minute by electricity of 3750 voltages, 50hertz.The rechargeable plug and the metal net can be tested for a minute by electricity of 1000 voltages, 50hertz. 5,Internal materials The circuit board in our electric mosquito swatter is complete, and its materials are genuine. While the materials in the cheap electric mosquito swatter are leftover bits and pieces, and its price is half of ours. Some manufacturers even cut the circuit board made from leftover bits and pieces to a half in order to cut the cost. This kind of electric mosquito swatter suffers a leakage of electricity. 6,We add a special resistance element in the circuit board -----loop resistor in order that protecting people from being hurt when charging batteries and using the electric mosquito killer. 7,There are large area of shapes in the wire net. During the process of killing mosquitoes, it can stabilize and balance the outer and inner net, and it also can prevent the outer net from caving in or sinking, in case that when it sinks, the electric mosquito swatter short-circuits. The more information about this product , pls read as followes: 1.Product feature 1)Except lighting,it can kill the mosquitos and other insect day or night; 2)it owns '3'pcs of long life,super bright LED; 3)Reted capactiy:400MA.H with lead-acid battery; 4)charging voltage:AC110V~220V/50Hz~60Hz; 5)working voltage:=2500V 2.Usage instruction: 1)put the switch forward to "OFF" and then put the plug out, charge intto the AC110V~220V/50Hz~60Hz socket directly. The charging indicator is lighting,the time to charge fully need about 10~12hours. 2)Before using,pls charge it about 4 hours which will be better. 3)To kill insects :pushing the switch in the dircetion of "ON1" or " ON2 LAMP" and then pressing the middle button ,as the working indicator lighting,there are high-voltage electricity in the middle layer. Waving the bat to touch the insects ,which will be eliminate immediately.After that, we release the button and the working indicator doesn't light . 4)the way of lighting:put the switch in the direction of "ON2 LAMP" 5)the working time: if it just killing mosquitos can use about 8 days ,if it just lighting can use about 15 hours. 3.Notice A. Don't treat it as a toy for children B. Don't press switch and touch electroform mesh when it is on charing. C .Don't use it at the place where flammable gas or liquid existed.don't frequently use metal wares like conductive objects to strike fire on mesh. D.Pls keep the electric source switch at off position when you don't use it . E. It can't be washed or scrubbed with wet wash-cloth.Dead mosquito on mesh can be brushed off or shake off. F .Pls charge it in time when electric power is used up. The charging time should be no more than 12 hours .It should be charged more than 6~8 hours in 3 per month and keep it in dry place away from damp . Mark: All the listed price is only for refference, for latest price please contact us directly! Trade Terms :FOB/EXW Payment Terms:T/T ,Western Union Trademark:YANSHENG Production Capacity :7000PCS/Day Packing:1PC/OPP Bag, 60PCS/Master Carton Standard:CE& RoHS Origin:Chaonan, Shantou, Guangdong, China HS Code:8509809000 8

Wifi Allone Infrared remote control support IOS and Android mobile phones. Package Content 1. Allone remote device 2. USB Cable 3. Manual -------------------------------------------------------------------------------------------------------------------- 1. Support WiFi network. 2.  Support Smart configure net technology, easy to access settings. 3.  Home appliances status timely feedback to APP. 4.  Support Max 15 IR home appliances. 5.  Support Max 20 devices to control WiFi remote control. 6.  Support automatic configuration with IR remote control. 7.  Support scene setting. 8. Easy installation, put on the table, paste on the wall, fix on the ceiling. 9.  Support working with RF switch to control lighting. Data Power supply DC 5V 600mA Max current  10A IR  38KHz FR  433MHz ASK Material    high transmittance PC+stainless steel Wireless standard   Wi-Fi 2.4GHz b/g/n Wireless frequency  GHz Security type   WEP/TKIP/AES Security mechanism  WEP/WAP-PSK/WPA2-PSK Wireless consumption   ≤0.3W

Crystal Table Lamp Rose Lamp with Touch Control, 16 Colors Changing RGB Night Light, Romantic Valentines Day Gift Night Light, USB Rechargeable Battery LED Lamp for Bedroom Living Room Party Decor Within 6-8 business days However, to find out an actual date of delivery, please enter your pin code. 【 Rose Crystal Diamond Table Lamp 】 SmileCome rose crystal diamond table lamp is new concept ,which is a simple and stylish modern lamps. Applying 3D technology, light and shadow are intertwined, and a layer of roses of light are bloomed on the tabletop. Make the surroundings of the diamond ambient light full of infinite romance.Please charge full once you received the package before use. 【 Remote Control 16-Color Touch Light 】Touch the top of the lamp with your finger to turn it on, and touch it again to change the color. Or choose the remote control control, you can adjust the brightness and 16 light color at will.The touch switch design is intimate and convenient, and the light is delicate, comfortable and natural, which protects the health of you and your family.

Gadgets High quality product. Brand: Big Dipper Product Description Big Dipper S09E Mini Twinkling Laser Lighting Effect - 60mW (red), 20mW (green) - Sound Activated or Auto-Play -Twinkling Patterns Product Features: Output: 60mW (red), 20mW (green) Dimensions: 130mm x 92mm x 51mm Weight: 0.4kg Control: Sound, auto-play, strobe Air cooled twinkling pattern Package Includes: 1 x Green & Red Mini Light Projector 1 x Power Supply Adapter 1 x Tripod 1 x User Manual

New Page 1 PRODUCT DESCRIPTION-: Mini Moving Laser  Stage Lighting Disco DJ Party Projector Features: 1.New  and high quality 2.Dynamic Liquid Sky 3.Animated Moving Starts 4.Cloud formation 5.Laser color: red,  green 6.Fully Adjustable Motion Speed 7.Sound active & Auto-mode 　 Specification: 1. Control  Mode: Auto strobe, voice-activated 2.Laser color: red, green, two-color 3.Red wavelength: 650nm, power: 100mW 4.Green laser wavelength: 532nm, power: 50mW 5.Cooling system: Fan forced cooling system power 6.Supply voltage: V   / AC Frequency: Hz 7.Dimension: 130 x 92 x 52 mm (length, width, height) 8.Weight: NW: 0.6KG 9.Color: Blue   Package Include: 1×Projector 1×AC power supply 1×User Manual 1×Tripod   PAYMENT Payment will be accepted through Paisa Pay as this is the most safe and secure mode of payment on     S H IPPING We ship anywhere