Lilypad main board compatible

LilyPad 328 ATmega328P Main Board compatible with Arduino’s IDE Features: Brand new and high quality The LilyPad Iduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The LilyPad Iduino can be programmed with the software. The ATmega328V on the LilyPad comes preburned with a bootloader that allows you to upload new code to it with the software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header. The LilyPad should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be switched off (making them twice as slow as they should be). Warning: Do not power the LilyPad with more than 5.5 volts, or plug the power in backwards: you'll kill it. 328 Main board; The Digital I/O Digital input/output terminal, a total of 0 ~ 13; The Analog I/O Analog input/output terminal, a total of 0 ~ 5; Support the ISP download function; Support the TX/RX terminals; Support the AREF terminals; Support the six groups of PWM terminal (Pin11 Pin10, Pin9, Pin6 and Pin5, responsible); The input voltage: 3.3 V DC; Using Atmel Atmega328V - 20 pu microcontroller; Specifications: Microcontroller: ATmega328V Operating Voltage: 2.7-5.5 V Input Voltage: 2.7-5.5 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA Flash Memory: 16 KB (of which 2 KB used by bootloader) SRAM: 1 KB EEPROM: 512 bytes Clock Speed: 8 MHz Package includes: 1* LilyPad atmega 328 Main board Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Description The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The latest version of the LilyPad supports automatic reset for even easier programming. This version of the LilyPad now uses the new ATmega328 at 8MHz Suitable for Arduino Pro Mini MHz/16MHZ. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output,power, and sensor boards are available. They're even washable! Technical parameters: Microcontroller:ATmega328 Diameter:Approx. 50mm Net weight:9 g Package weight:19 g   Package Contents: LilyPad 328 ATmega328P Main Board Module Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

Description 100% Brand New and High Build Quality The latest version of the LilyPad supports automatic reset for even easier programming. This version of the LilyPad now uses the new ATmega328 at 8MHz Suitable for Arduino Pro Mini 328/8MHz/16MHZ. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output,power, and sensor boards are available. They're even washable! Technical Parameters: Microcontroller:ATmega328 Diameter:Approx. 50mm Net weight:9 g Package weight:19 g   Package Contents: 1x LilyPad 328 ATmega328P Main Board Module Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  skastores@gmail.com If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

1 x LilyPad Arduino 328 Main Board *** MUST HAVE FOR STUDENTS  AND HOBBYIST ***  Product description: The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find

Description "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">NEW LilyPad 328 Module ATmega328P Main Board 16M For Arduino Technical parameters:   Package Includes: 1 Piece new  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">NEW LilyPad 328 Module ATmega328P Main Board 16M For Arduino Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software No need to install any additional driver

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

ARDUINO UNO R3 DEVELOPMENT BOARD ATMEGA328P | CH340G | WITH USB CABLE   Package Include: ·         1X ATMEL ATmega328P  CH340G BOARD, USB Cable included   Product description:   Main changes from the older version:  CH340G replace ATmega16U2 AUTO POWER SELECTION FEATURE ENABLED Technical Details: Microcontroller: ATmega328P Operating voltage: 5V  Input Voltage (recommended): 7-12V (EXTERNAL), 5V(USB) Digital I/O Pins: 14 (of which 6 provide PWM output)  Analog Input Pins: 6  DC Current per I/O Pin: 40mA  DC Current for 3.3V pin: 50mA  Flash Memory: 32 KB (ATmega328P) of which 0.5KB used by bootloader  SRAM: 2 KB (ATmega328P)  EEPROM: 1 KB (ATmega328P)  Clock Speed: 16 MHZ  USB Chip CH340G Usage Instructions: Click here for the driver software Before connecting the Board to your USB port: 1.     Download the “ch341ser.exe” file and run it. 2.     The software asks whether it can install the CH341SER.INF driver for the CH340 chip. Click INSTALL 3.     A Windows message asks whether the driver has installed correctly. Click YES. 4.     Connect your Board. 5.     From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX) Install Arduino IDE Download Here http://arduino.cc/en/Main/Software Connect Board to Computer and open Arduino IDE. Select board as "Uno"

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

www.hitroncomponents.com Package Contents   1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "EXTERNAL POWER SUPPLY IS NOT INCLUDED & HAS TO BE PURCHASED SEPARATELY"   Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software For bulk order get special price Contact Details   Have any queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"       The Arduino Uno is a microcontroller board based on the  ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards

The package consists of the board shown above and a USB cable. The board is fully compatible with the original arduino. Please refer to the below link for the detailed product description: http://arduino.cc/en/Main/arduinoBoardUno All required development tools and examples can be downloaded from the arduino website

www.hitroncomponents.com GET YOUR COMPANY LOGO ON BOARD WITH HEAVY DISCOUNT (MINIMUM ORDER QUANTITY 250)   Package Content 1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "INSTALL CP DRIVER BEFORE CONNECTING THE BOARD" CLICK THE LINK BELOW FOR CP DRIVER http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software If you get any difficulty during driver installation you can freely contact to for technical support You might be thinking that how we are able to sell these board

www.hitroncomponents.com Package Contents   1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "INSTALL CP DRIVER BEFORE CONNECTING THE BOARD" CLICK THE LINK BELOW FOR CP DRIVER http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software If you get any difficulty during driver installation you can freely contact to for technical support You might be thinking that how we are able to sell these board

The product is a brand new Arduino UNO R3 Clone. It has guilded pins for your use. Works on 5v USB or 6-12v dc power supply. Check http://arduino.cc/en/main/arduinoBoardUno for more details. Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g

Description The ArduPilot Mega 2.6 allows the user to turn any fixed, rotary wing or multirotor vehicle (especially multicopters and rovers) into a fully autonomous vehicle;capable of performing programmed GPS missions with waypoints1. 3.3V or 5.0V DC power supply 1. Arduino and ArduPilot Mega 2.5 Compatible! 2. Includes both right angle and straight pins for I/O, allowing user to customize as needed. 3, Onboard 4 MP Dataflash chip for automatic datalogging 4. Invensense/'s 6 DoF Accelerometer/Gyro MPU-6000. 5. Atmel/'s ATMEGA2560-16AU and ATMEGA32U-2 chips for processing and usb functions respectively. 6. Barometric pressure sensor upgraded to MS5611-01BA03, from measurement specialties Note1: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, Telemetry radio). It is not designed to power servos. Use your aircraft/'s own ESC/BEC for that. Note2: the use of electric power transfer: the need to JP1 jumper plug, power supply voltage does not exceed 5.6V, not less than five using UEBC: The UEBC power output cable plugged into the receiver INPUTS port, power supply is not higher than 5.2 is not lower than 4.8V Technical parameters:   Material: Plastic, Copper Main Color: Black Size: 70*44*13 mm Net weight: 38g Color: As shown