Mega board free

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz Features: v   Completely solved the traditional board that is not compatible with win7 and win8. v   Increased the pin socket, to facilitate the use of DuPont line cables. v   Replaced Atmega16u2 with CH340G which can easily communicate to Arduino IDE directly.                 Package Include: v   One piece of Arduino Mega board v   One USB cable v   A plastic container box. Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

3.6 inch TFT LCD Screen For Arduino MEGA Board   Description: Parameters: Dimension:3.6 inch Controller:R Resolution:   data bits: 8 -16 Interface pin number:37 pin Distance:1 mm     3.6 inch LCD   screen   interface definition   (37pin): Sequence Definition 1 NC 2 VDD 3 VDD 4 CS 5 RS 6 WR 7 RD 8 RESET 9 DB0 10 DB1 11 DB2 12 DB3 13 DB4 14 DB5 15 DB6 16 DB7 17 DB8 18 DB9 19 DB DB DB DB DB DB GND 26 NC 27 NC 28 NC 29 NC 30 LED-K6 31 LED-K5 32 LED-K4 33 LED-K3 34 LED-K2 35 LED-K1 36 LED-A 37 GND Powered by Turbo Lister

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE If you want  3.2'' TFT Touch Shield for Mega compatible please Click Here Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

Mega protoshield V3 for arduino mega prototype with mini breadboard   Mega protoshield V3 prototype expansion board (including the bread board)   Description – mega protoshield v3: ·           The Mega Protoshield V3 makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project- or use it with a small solder less breadboard to quickly test circuit ideas without having to solder. It's got extra connections for all of for Arduino I/O pins- and its got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and for Arduino into a single module. ·           With Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier ·           SOP28 SMD component package to be more handy Arduino electronics enthusiasts will not be directly insert bound components ·           Distribution of white breadboard, makes it easy for you to do the experiment ·           If you want to learn MEGA controller, it is your best choice.   Features - mega protoshield v3: ·           Wide prototyping area ·           Seamlessly plugged into for Arduino MEGA ·           Arduino pinout ·           Reset button ·           Indicator of power and status ·           Solder components directly ·           ICSP connector ·           14 pin SMD footprint (50 mils pitch) ·           20 pin Through Hole footprint (100 mils pitch)   Specification - mega protoshield v3:   Depth                                          19mm Height                                        103mm Width                                        56mm Product Weight                       39.7g(with bread board)   Package Include: ·           1 x Mega protoshield V3 ·           1 x Mini breadboard ·           A plastic container box.   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Mega R3 Compatiable Microcontroller Board ATmega USB Cable of Arduino This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality.  100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

MEGA SALE - Brand New Air Cooler / Room Cooler - Kenstar Symphony FLAT 40% DISCOUNT PLEASE CALL 88,00,648510, flat 40% on all Products Only genuine buyers please. All goods are with warranty and with bill. Units are brand new box packed they have never been repaired or used. Sizes Available: 18 litre 22 litre 25 litre 40 litre 50 litre 60 litre Key features Low power consumption high cooling efficency. Remote Control Water Level Indicator Openable Cooling Pads Works on Inverter Honeycomb Cooling Media Four Directional cooling flow High air delivery low noise rust free long life. Automatically swing function Portability convenient to move your cooler Smart Humidity Control Water Inlet Landmark Ramada Hotel Sector 45. PLEASE SEARCH YANVI ENTERPRISES SECTOR 45 GURGAON ON GOOGLE MAP FOR EXACT LOCATION Please visit Godown Shop no 2 plot no 450 sector 45 Gurgaon. Landmark Ramada Hotel Sector 45.

This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality. 100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Package Includes: 1 Piece new  MEGA Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Product Description: The Mega is a microcontroller board based on the   ATmega ……… Summary Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

!! NO HIDDEN COST !! Mega sale Aquafresh Grand+ | HURRY UP limited offer Brand : Aquafresh Aqua Grand+ Feature : RO+UV+UF+TDS CONTROL+ Minerals Cartridge Filtration + Carbon Filter+Sediment + Membrane Filtration+ Auto Flashing Sensor+Fully Automatic Storage : 12Ltr tank Flow Rate : 15ltr. Purification stage : 7 stages filtration 1. Pre Filter - Remove visible impurities like dirt , algae , chlorine , spider web from water 2. Carbon Filter - Removes foul Smell from water through carbon . 3. Sediment Filter - Removes dust ,sand , filters water. 4. RO/Post Carbon - Removed unwanted particles and also removes foul smell from water. 5. UV Filters - Removes germs and bacterias from water when it passes from ultra violet radiations. 6. UF - Ultra filtration Cleanses and removes unwanted substances like chlorine , sulphur, arsenic which are poisnous for health. 7. Mineral Filter - Add minerals like calcium , potassium , magnesium etc. to water for crystal clear minerals enriched water. Storage Tank Available: 8Ltr/ 10Ltr /12Ltr/ 15ltr /18Ltr Operating Voltage : 30 V DC. UV Lamp Power : 11 W Input Voltage : 150 - 290 V AC (50 Hz) Dimensions : 375 X 180 X 525 (MM) Warranty:- 1 Year Services:- Available Deals in Delhi/Gurgaon/Noida Free Home Delivery Delivery and Installation Both Are Available Call me :- 8384O x 33354

Set of 4 Pcs AVR40 Base Board  Kit.  For Electronic project.  Atmel AVR - 40 Pin Base Boar d (For ATmega16, AT mega 32,Microcontroller) 1 Pcs 6 Digital Sensors Board for Line Follower    1 Pc 16X2 LCD Board for Display 1 Pc L298N Dual H-Bridge Motor Driver Board. **FREE**4 Pcs FRC Cable. ** Does not Include Any Microcontroller ** Atmel AVR - 40 Pin Base Board AVR-40Pin Development Board -For 40 pin AVR like ATMEGA16, ATMEGA32 etc it Comes without   micocontroller 1 Pc L298N Dual H-Bridge Motor Driver Board. 6 Digital IR - Photodiode Sensors Array for LFR Robot 6 IR-Photodiode Sensors Array- for Line following robot (LFR) and micro-mouse robot  (Digital out, Independent Manual Adjustable) Ideal for LFR (line-follower Robot) obstacles avoiding robots obstacles chasing robot side wall sensor maze solving robots 16x2 LCD Display Board Box Header Connection > LCD Connection (4Bit Mode) Pin#1   > RS(4) Pin#2   > EN(6) Pin#3   > D4(11) Pin#4   > D5(12) Pin#5   > D6(13) Pin#6   > D7(14) Pin#7   > No Connection Pin#8   > No Connection Pin#9   > Gnd () Pin#10 > +5V (2) Note Pin#5 of LCD (RW) is forcefully connected to Ground L298N Dual H-Bridge Motor Driver Board New Improved L298 Dual H-Bridge Board - Ideal for robot motor control, smart  full feature,compact, Compatible with AVR - 40 Board 10 Pin Box Header Connection Description Pin1= ENABLE B Pin2= ENABLE A Pin3= INPUT-3 Pin4= INPUT-1 Pin5= INPUT-4 Pin6= INPUT-2 Pin7= NOT CONNECTED Pin8= NOT CONNECTED Pin9= Ground Pin10=Vcc +5Volt    Fore More Details please refer Datasheet of L298N. ****FREE**** 4 Pcs of 10 Wire FRC (Flat Ribbon Cable) Cable - 15 cm. ,with female connectors on both ends. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*      * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post. Please Clear Any Doubts "BEFORE" Buying any products form us.     Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components.                                                                                                        For more assistance call: +91-, "DISCLAIMER: The Seller DSR rating shown above is for representation purpose only, Please check our feedback profile to know my current DSR ratings "   Any Octroi or other local taxes if applicable will be paid by buyer only. .in Toll free Helpline: Powered by Turbo Lister

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Contact us for Special Price if you want to buy more than 5Pieces of this item Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove, UNO, MEGA, MEGA board. Blue Backlight with white words, adjustable backlighting 4 Bit Arduino LCD Library The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a white character blue backlight LCD. The keypad consists of 5 keys - select, up, right, down and left. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage divider.

  Package Includes: 1 Piece new  MEGA2560 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order