Mono block amplifier stereo

Stereo Amplifier Module based on TDA7379 Compact PCB based on TDA7379 Supply Voltage operating maximum DC 22 V  HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD ALSO AVALABLE 6 Channels of TDA7379 (3 IC in single board for 5.1 setup). Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

  Hi-Fi Stereo audio amplifier module: 2X  TDA2030         Features: 18 Watts+ 18 Watts RMS maximum. Wide-range supply voltage, up to dual 18 Volts DC  100K OHM INPUT IMPEDANCE. X 46 Gain. Short-circuit protection to ground Thermal shutdown Heatsink needed. Description: The TDA2030 is a monolithic integrated circuit in  the Pentawatt ® package, intended for use as a  low frequency class-AB amplifier. Typically it  provides 14 W output power (d = 0.5%) at 14 V/4 Ω. At ±14 V or 28 V, the guaranteed output  power is 12 W on a 4 Ω load and 8 W on an 8 Ω  The TDA2030 provides high output current and  has very low harmonic and crossover distortion. Furthermore, the device incorporates an original  (and patented) short-circuit protection system  comprising an arrangement for automatically  limiting the dissipated power so as to keep the  operating point of the output transistors within  their safe operating range. A conventional thermal  shutdown system is also included. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.       

ALPINE V12 series digital car mono block amplifier MRD-M which is capable to drive 4 No's single voice coil subwoofers at a time. RMS watts at 4 ohms is 500 RMS watts at 2 ohms is RMS watts at 1 ohm is Very very powerful & hard hitting!!! only 8 months used v12 digital amplifier

HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

Brand new condition FEATURES - Class D Mofset Power Amplifier - Mofset PWM Power Supply - Variable Subsonic Filter - Variable Bass Boost - Variable Low Pass Filter - Variable Phase Shift - 1 OHM/2 OHM Parallel Connection Options - 500Wx1 4 OHM/ 750WX1 2 OHM/ 1200WX1 1 OHM - THD < 1% THD - Wired Remote Controller - Multiway Protection Circuit - (Thermal / Over Current/ Speaker Short/Speaker) INCLUDED -Platinum Mono Block High Power Car Amplifier

Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Total 40 Mosfets caps uF Soft start, Speaker Protection Watts RMS Mono Bridge Connect otal Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) Assembled Time 12 Days

Kindly use US to India (110V to 240V) voltage converter or adaptor with this product About Us Store Shipping Returns Payment Top Brands: Plantronics Polycom Samsung Panasonic Garmin Motorola AT&T Humminbird Norelco Braun Sony Oral-B Vtech Petsafe Remington Search our Store! NEW TV Listener J3 Infrared Stereo TV Amplifier System Description Customer Service Payment & Shipping International Customers TV Listener J3 Brand New The TV Listener J3 is a TV Amplifier System. J3 Features: TV Amplifier System Transmits Up To 33 Feet Works In Stereo Or Mono Mode Works With Any TV (Including All Flat Screens) Wireless, Lightweight Headset - No Cords Or Wires Soft, Cushioned Ear Pads And A Self-Adjusting Band Rechargeable Headset Lasts Over 15 Hours Volume Control Conveniently Located On Headset Headset Ear Pieces Swivel For Maximum Comfort Works Independently Of TV Speakers We are working together with to ensure your protection. Please allow us the opportunity to resolve any issues before opening disputes and/or leaving feedback. Feel free to contact us at . We are open Monday-Friday 9:00AM-5:00PM EST. We are closed weekends and holidays. Any emails or calls received out of normal business hours will be returned the next business day - We Only ship to a confirmed PayPal addresses. No exceptions. - A % sales tax charge is applied for items shipped to NY state. Note: We do not ship to these specific locations or addresses such as Alaska, Hawaii, US Protectorates (Puerto Rico), APO/FPO, PO Box addresses. The item comes with U.S. voltage of 110 Volts. So Please ensure that this product is compatible with the standards within your country before purchasing. You are responsible for shipping and handling charges

Watt RMS MOSFET Stereo Hi Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo H i Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Powe r Supply -+96 volt Total 40 power Mosfet Transistors Speaker Protection and soft-start Stereo watts Bridge watts Mono Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (10Hz to 20Khz) Assembled Time 10 Days

YAMAHA R-S202 STEREO RECEIVER Advanced circuitry design Bluetooth ® to your favorite streaming music services 40 station FM/AM preset tuning Brushed aluminum finish and simplistic design Speaker selector for two systems Simple remote control layout Headphone terminal BILL + 1 YEAR YAMAHA INDIA WARRANTY VALID ALL OVER INDIA Yamaha, the most trusted brand in home audio, adds Bluetooth® compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha natural sound. Heritage of Technical Expertise Rooted in technology and expertise. The R-S202 was created from years of experience and technological expertise in receiver design. With a music heritage that runs over 125 years deep, our passion and reputation for Hi-Fi was born from the music side and extended into electronics. The concept of natural sound is based on reproducing music as it would be experienced live. Built with scrupulous care from the circuit design to basic sound reproduction, the R-S202 reproduces high-quality, musically-rich sound for the entry level consumer. High-Power Output Never peak. The R-S202, with two channels of 100 W high-power output* that are above its class, has a high-quality sound design that minimizes the length of signal routes and optimizes the circuit layout. Positioning the power transformer near the amp circuit reduces power loss while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground connect at one point, eliminating mutual interference to achieve a higher S/N ratio. The result is sound clarity stripped of noise and other signals. *8 ohms, 40 Hz-20 kHz, 0.2% THD Bluetooth ® to Streaming Music Services Connect wirelessly. The R-S202 provides Bluetooth functionality to let you enjoy streaming music from smart phones and other devices. Use your device to select the songs from your library and hear them with the legendary quality of Yamaha sound. 40 Station AM/FM Preset Tuning All your stations. Register up to 40 favorite FM and AM stations, then conveniently select them from either the receiver or the remote control. Auto preset lets you automatically search for and register FM stations. Frequencies appear on the display, so when you want to listen to a new station, you can quickly and easily dial it in. Simple and Sophisticated Design Less is more. The R-S202 inherits the simple, sophisticated design style for which Yamaha Hi-Fi audio is famous. With an elegant brushed finish, it harmonizes beautifully with other audio equipment. The Yamaha commitment to beauty and sophistication are demonstrated in the finish and ease of control, giving the user a premium audio experience. Speaker Selector Check one, two. Equipped with speaker terminals for two systems, this receiver lets you connect two sets of speakers. The speaker selector makes it easy to switch between outputs, allowing you to hear the sound from one speaker system (A or B) or both (A+B). Try the Yamaha NS-6490 bookshelf speakers and the YST-SW216 powered subwoofer with the R-S202 for an ultimate stereo system. Power Saving Go Green. A power management function automatically switches to standby mode. It can be set to two, four, eight or 12 hours or turned off. Power consumption during standby is only 0.5 W, achieving good energy saving performance. Other Notable Features • Simple remote control layout • Headphone terminal Receiver / Integrated Amplifier Network section Bluetooth Yes (SBC / AAC) Rated Output Power (8 ohms, 40 Hz-20 kHz, 0.2% THD) 100 W + 100 W Maximum Power(8 ohms, 1 kHz, 10% THD) 140 W + 140 W High Dynamic Power / Channel (8 / 6 / 4 / 2 ohms) 125 W / 150 W / 165 W / 180 W Frequency Response 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB) Total Harmonic Distortion (CD to Sp Out, 20 Hz - 20 kHz) 0.2% Signal-to-Noise Ratio (CD) 100 dB (500 mV) Input Sensitivity (CD) 500 mV / 47 kΩ FM 50dB Quieting Sensitivity (IHF, 1 kHz, 100% Mod., Mono) 3 μV (20.8 dBf) FM Signal-to-Noise Ratio (Mono / Stereo) 71 dB / 70 dB Standby Power Consumption 0.5 W Dimensions (W x H x D) 17-1/8” x 5-1/2” x 12-5/8” Weight 14.8 lbs. ANY OCTROI PAYABLE WILL BE BORNE BY THE BUYER. IN CASE OF ANY INQUIRIES OR COMPLAINTS PLEASE CONTACT US AT +918800163686  OR rhythmics5@gmail.com   YOUR POSITIVE FEEDBACK HELPS OUR BUSINESS GROW. SO IF YOU ARE SATISFIED WITH OUR PRODUCT AND SERVICES THEN PLEASE DO LEAVE A FEEDBACK. THANK YOU.

LA4440  is a two channel audio power amplifier IC with inbuilt in dual channels enables it for stereo and bridge amplifier applications. In dual mode it gives 6 W per channel and in bridge mode 19 W output. It has good ripple rejection of 46dB, small residual noise, built in over voltage and surge voltage protection etc. ideal feature of the IC is its pin-to-pin protection. Here  LA4440  is wired in Stereo configuration using both inputs and outputs. Features of LA4440 Built in two channels to use as Mono and Stereo Dual mode 6W x 2 and Bridge mode 19W 46 dB Ripple rejection 18V Max. Power handling and 12V typical Good channel separation and low distortion Built in Audio Muting function and Pin-to-Pin protection Surge protection circuitry Proper knowledge require before assembly

Pioneer GM-X944 4-channel car amplifier in excellent working condition. A legend of an amp and probably the best car audio amplifier from Pioneer. 1 ohm stable in stereo mode and 2 ohm stable in bridged mode. Can easily power two subwoofers. 75 watt RMS per channel at 4 ohms stereo 150 watt RMS per channel at 2 ohms stereo 500 watt RMS per channel at 2 ohms mono SNR: 105db THD: 0.005% Wide crossover options, LPF, HPF and BPF 40 to 120 hz and 3000 to 9000 hz for all all channels Gain: 0.4 to 6.5 volts Gold plates RCA and power connectors.

TDA 2030 HI FI STEREO AMPLIFIER  YOU CAN USE A 3 INCH TO 5 INCH WOOFER 12,O,12 DUAL DUAL SUPPLY DC TDA 2030 40W MONO SUBWOOFER HI-FI AMPLIFIER BOARD 

Its real power 1000 Watt pmpo and 250 w RMS mosfet based amplifier have some extra features like high input impedance, high band width, high gain, high slew rate, high linearity, high efficiency, high stability etc. It tested by our team and we are extremely pleased by its performance and also ruggedness as far as maintenance and handling is concerned.. All capicator are of branded for high performance and longer life. Best part is the entire circuit utilizes commonly available components. maximum v input 27 vLength:10cmWidth: 10cmFeatures and benefits of mosfet based Amplifier Good Bandwidth. The range of frequency that an amplifier can amplify properly is called the bandwidth of that particular amplifier. Good Gain. Gain of an amplifier is the ratio of output power to the input power. It represents how much an amplifier can amplify a given signal Better Efficiency. Efficiency of an amplifier represents how efficiently the amplifier utilizes the power supply. Good Stability. Stability is the capacity of an amplifier to resist oscillations. These oscillations may be high amplitude ones masking the useful signal or very low amplitude. Slew rate. Slew rate of an amplifier is the maximum rate of change of output per unit time. It represents how quickly the output of an amplifier can change in response to the input. Linearity. An amplifier is said to be linear if there is a linear relationship between the input power and the output power. It Low Noise. Noise refers to unwanted and random disturbances in a signal. In simple words, it can be said to be unwanted fluctuation or frequencies present in a signal. Output voltage swing. Output voltage swing is the maximum range up to which the output of an amplifier could swing. Input Supply: It takes wide range of input supply 24 to 30 volt. Tested on 18-0-18 v and 24-0-24, 5 Amp or 10 Amp Transformer (not included) Input sound: two channel stereo Output sound: mono sub output(Note: This kit is not for novice electronics hobbyist. All common kit are attached (all potentiometer) and everything mention on board but still proper knowledge about the subject is required to understand and make the complete project. We do not held any responsible for any issues or help either due to negligence, ignorance or lack of proper knowledge about the subject.)  Package: 1 x Audio subwoofer Amp Board

100 Watt Per channel Stereo Amplifier, bare PCB (2x TDA7294 bridged) Reference design, No frills. Highly stable due to good layout. 2 nos of TDA7294 in noninverting configuration using dual 36 to 40 Volts (center tapped) PCB Dimensions:  143mm x 50mm Very high quality Pcb. Single sided Glass epoxy; Green masked, tinned pads with legend printing. Full schematics; Bill of Materials, wiring diagram will be provided. IC is available at extra cost. Suitable power supply rectifier board also available for easy assembling. Very versatile Pcb, TDA7293 can also be used. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

Techno 4 Professional Power Amplifier 1100W/per channel at 8ohms 1800W/per channel at 4ohms 2200W/per channel at 2ohms Transistors used 2SA1943 2SC5200 Features - Techno Series provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start - Flow-through ventilation from front to back - Offered in 150W-1300W power area - High power toroidal transformer - Internal heat sinks with forced air cooling for rapid, heat dissipation - Dual fans for proper cooling to maintain performance and proper working levels - Suitable to various Input / Output Connectors. Has 3 Ways Sensitivity Switches for Stereo, Bridged Mono and Parallel Mono. Also connects swiftly to speakers VIA Speakon. - Can endure 8ohm, 4ohm and 2ohm loads - Highly reliable and stable - Noise Free product. - Less Distortion for better quality sound. - Excellent & Natural Timbre. - Crossover Selector in the 3U Techno Series to use with one or more subwoofer speakers.