Ms digital ac dc

we only accept Paisapay New Page 1 MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE Description: MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery (Not included) Item size: cm Item weight: 414g Package size: cm   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE Description: MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery (Not included) Item size: cm Item weight: 414g Package size: cm   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 NEW MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE FREQUENCY Description: MS This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features:   Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Data hold & Zero adjustment Carrying case for travel Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery   What's

MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9%  Power: 6F22 9V Battery (BATTERY INCLUDED) Item size: cm Item weight: 414g Package size: cm

New Page 1 New Page 1 Digital Clamp Meter MASTECH MS AC/DC Voltage Tester with Diode & Plastic Box Description: We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

MASTECH MSG Digital Clamp Meter Current AC DC Voltage Resistance Tem DESCRIPTION-:   MASTECH MSG Digital Clamp Meter Current AC DC Voltage Resistance Temperature Features: counts LCD display Jaw opening up to 55mm Diode check and continuity test Type-K thermocouple contact temperature measuring Test AC/DC voltage, AC current, resistance, frequency and temperature Overrange indication, low battery indication and Polarity indication Specifications: DC voltage: V¡ÀV¡À1.0% AC voltage: V¡À2.0% AC current: A =600A¡À3.0% Resistance: 200ohm¡Àk/2M ohms¡À1.5% Frequency: 2kHz¡ÀkHz¡À1.5% Temperature: 0 to 750 Centigrade¡À to Fahrenheit¡À2.0% Maximum voltage between terminals and earth ground: CAT II V dc or 750V ac rms. (sine) Display: LCD, counts, updates 2-3/sec. Jaw opening capability: 55mm (Max conductor size) Power supply: 9V battery (NEDA or IEC 6F22)   Operating Environment: 0 to 40 Centigrade Storage temperature: -10¡æ to 50 Centigrade Package includes: 1 * MSG Clamp meter 1 * Set test leads 1 * K-type themocouple probe 1 * User manual  

New Page 1 New Page 1 New Page 1   Digital Clamp Meter Ac/dc Multimeter Electronic Tester Meter DESCRIPTION -   * High accurate and superior reliable digital multi-meter with LCD screen * Digital Multimeter used to measure AC/DC voltage, AC/DC current, resistance, frequency * Specially designed to meet the daily needs of general engineers and service personnel * Auto ranges with overrange protection function * Compact, reliable and economical, ideal for all toolboxes and pockets * Product Specification: * Display: LCD with maximum reading * Measuring Speed: 2.5 times~3 times per second * Polarity: '-' displayed for negative polarity * Over range Indication: Only figure '1' on the display * Operating Temperature: 0C to 50C * Storage Temperature: -20C to 60C* * Power Supply: NEDA FP 9V battery * Low Battery Indication: Displayed   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 New Page 1   Digital Clamp Meter Ac/dc Multimeter Electronic Tester Meter DESCRIPTION -   * High accurate and superior reliable digital multi-meter with LCD screen * Digital Multimeter used to measure AC/DC voltage, AC/DC current, resistance, frequency * Specially designed to meet the daily needs of general engineers and service personnel * Auto ranges with overrange protection function * Compact, reliable and economical, ideal for all toolboxes and pockets * Product Specification: * Display: LCD with maximum reading * Measuring Speed: 2.5 times~3 times per second * Polarity: '-' displayed for negative polarity * Over range Indication: Only figure '1' on the display * Operating Temperature: 0C to 50C * Storage Temperature: -20C to 60C* * Power Supply: NEDA FP 9V battery * Low Battery Indication: Displayed   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

SMALL  DIGITAL MULTIMETER       Small Multimeter for your day to day needs If you have basic knowledge about Multimeters you can try this small Multimeter for basic continuity checks & Voltage Meaurements      Description 1.  Functions DCV ACV DCA Resistor (ohms) Diode Buzzer Transistor (HFE) Temperature Square Wave Output Battery Test   2.  Display 4.75 cm length, 15mm high LCD. 3.  Operating Instructions When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to "V 0 mA" jack and black test lead to "COM" jack. When testing the current more than 200mA, connect the red test lead to "' OADC" jack and black test lead to •COM" jack When testing the temperature, connect the temperealure probe to "V, 0, mA" jack or "COM" jack. It can also be connected to the jack specialised for it. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight-hole jack. Square wave output: the frequency is 50Hz, the voltage is approx. 3Vp-p. The output jack is "V, 0, mA" and •COM". General Powered by 9V Battery Inside Dimensions Multimeter : 12.5 cms(Length) X 6.75 cms(Width) X 2.25 cms (Thickness) Wire Length (Including Pin): 71 cms each              

New Page 1 New Page 1 Mastech MS B Digital Mini Clamp Meter AC/DC  MINI  Digital  Clamp  Meter Description: Digital Clamp Meter AC  MINI  Digita l Clamp  Meter AC/DC  MINI  Digital  Clamp  Meter   l Conform to the IEC Standard CAT III 600V l Double Molded Rubber Case l Data hold l SMT application l Auto/Manual range l Auto power off l MAX.DIAMETER FOR CONDUCTOR: l Weight:Approx. 240g l Size:208mm × 78 mm × 35 mm   Specifications                                         Function Range&Accuracy   MSB DC VOLTAGE: 400m/V ± 0.8% AC VOLTAGE: 400mV ± V ± 1.0% DC CURRENT:   AC CURRENT: 4A/40A/400A/600A ± 2.0% RESISTANCE: K/40K/400K/4M ± M Ω± 2.0% CAPACITANCE: 50n/500n/5u/50u/100uF ± 4.0% FREQUENCY: K/100KHz ± 1.0% TEMPERATURE: - ℃ DUTY CYCLE: %

we only accept Paisapay New Page 1 DESCRIPTION-: Mastech MS B Digital Mini Clamp Meter AC/DC  MINI  Digital  Clamp  Meter   Digital Clamp Meter AC  MINI  Digita l Clamp  Meter AC/DC  MINI  Digital  Clamp  Meter   l Conform to the IEC Standard CAT III 600V l Double Molded Rubber Case l Data hold l SMT application l Auto/Manual range l Auto power off l MAX.DIAMETER FOR CONDUCTOR: l Weight:Approx. 240g l Size:208mm × 78 mm × 35 mm   Specifications                                         Function Range&Accuracy   MSB DC VOLTAGE: 400m/V ± 0.8% AC VOLTAGE: 400mV ± V ± 1.0% DC CURRENT:   AC CURRENT: 4A/40A/400A/600A ± 2.0% RESISTANCE: K/40K/400K/4M ± M Ω± 2.0% CAPACITANCE: 50n/500n/5u/50u/100uF ± 4.0% FREQUENCY: K/100KHz ± 1.0% TEMPERATURE: - ℃ DUTY CYCLE: %

New Page 1 New Page 1 MASTECH MS AC/DC Digtal Clamp Meter Temp Frequency   DESCRIPTION-: MASTECH MS AC/DC Digtal Clamp Meter Temp Frequency This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery (Not included) Item size: cm Item weight: 414g Package size: cm  

New Page 1 MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temp DESCRIPTION-:   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                    Specification:   DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery  

New Page 1 New Page 1 MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temp Description: MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                    Specification:   DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

New Page 1 New Page 1 DESCRIPTION   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.     No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use. Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)               Specification: DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

we only accept Paisapay DESCRIPTION   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.     No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use. Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)               Specification: DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

New Page 1       BRANDED   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                  Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                         Specification:       DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery