Neewer meike lcd

Neewer Meike LCD Screen Remote Controller Battery Grip Replacement for MB-D11 Works with EN-EL15 Battery for Nikon D - Neewer Battery Grip for Nikon D - Neewer Battery Grip is a comfortable and secure way to extend your battery life. It allows you to install two MS-D11EN batteries to your camera to effectively double your shooting time. Furthermore, the grip can hold six AA batteries for emergency cases. - The ergonomic design of the Vivitar grip improves accurate shooting

Neewer Meike MK320 TTL LCD Display flash Speedlite for Sony A7(A7 A7S A7R A7II) NEX6 RX1 RX1R RX10 RX100II HX50 A A Neewer MK320 TTL LCD Display flash Speedlite for Sony A7(A7 A7S A7R A7II) NEX6 RX1 RX1R RX10 RX100II HX50 A A Features: Powerful TTL LCD Flash with High Guide No.32(ISO mm). Flash Mode: TTL/M/MULTI/S1/S2. Recycle time: Approx.5s Light rotation: 60degree- 90degree horizontally and -7degree- 90degree vertically. Additional Function:Support Front-curtain Sync,LED auxiliary and focusing,power save mode,overheating protection and memory function. Specificications:andnbsp; andnbsp; Circuit Design: Insulated gate bipolar transistor (IGBT) Guide Number: 32(ISO mm) Flash Mode: TTL/M/MULTI/S1/S2 Swinging/Tilting flash head(bounce flash) Light rotation: 60degree- 90degree horizontally and -7degree- 90degree vertically andnbsp; The wirelss trigger: Wireless induction flash lighting Wireless triggering distance: 49 feet/15m indoor, 33 feet/10m outdoor Flash times: times(For AA alkaline batteries) Recycle time: About 5s(For AA alkaline batteries) Flash control: 8-step power control() ，step length is 0.3EV, total 22 fine- tuning stalls Color temperature: K External interface: Hot shoe, USB Power Supply: 2 AA alkaline cell or AA Ni-MH battery(not included) Additional Function:Support Front-curtain Sync,LED auxiliary and focusing, power save mode,overheating protection and memory function. Compatible with: Sony A7(A7 A7S A7R A7II) NEX6 RX1 RX1R RX10 RX100II HX50 A A Note: Camera not included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer® Meike MK320 TTL LCD Display flash Speedlite for Sony A7(A7 A7S A7R A7II) NEX6 RX1 RX1R RX10 RX100II HX50 A A Product Features Powerful TTL LCD Flash with High Guide No.32(ISO mm). Flash Mode: TTL/M/MULTI/S1/S2. Recycle time: Approx.5s Light rotation: degrees horizontally and -7- 90degrees vertically. Additional Function:Support Front-curtain Sync,LED auxiliary and focusing,power save mode,overheating protection and memory function. Description Features: Powerful TTL LCD Flash with High Guide No.32(ISO mm). Flash Mode: TTL/M/MULTI/S1/S2. Recycle time: Approx.5s Light rotation: 60degree- 90degree horizontally and -7degree- 90degree vertically. Additional Function:Support Front-curtain Sync,LED auxiliary and focusing,power save mode,overheating protection and memory function. Specificications: Circuit Design: Insulated gate bipolar transistor (IGBT) Guide Number: 32(ISO mm) Flash Mode: TTL/M/MULTI/S1/S2 Swinging/Tilting flash head(bounce flash) Light rotation: 60degree- 90degree horizontally and -7degree- 90degree vertically The wirelss trigger: Wireless induction flash lighting Wireless triggering distance: 49 feet/15m indoor, 33 feet/10m outdoor Flash times: times(For AA alkaline batteries) Recycle time: About 5s(For AA alkaline batteries) Flash control: 8-step power control() step length is 0.3EV, total 22 fine- tuning stalls Color temperature: K External interface: Hot shoe, USB Power Supply: 2 AA alkaline cell or AA Ni-MH battery(not included) Additional Function:Support Front-curtain Sync,LED auxiliary and focusing, power save mode,overheating protection and memory function. Compatible with: Sony A7(A7 A7S A7R A7II) NEX6 RX1 RX1R RX10 RX100II HX50 A A Package contents: 1x MK320 Flash Note: Camera not included. Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer Meike Professional Camera Battery Grip Replacement for VG-C77AM Works with NP-FM500H Batteries for Sony Alpha SLT A77 A77V Neewer BG-3B Replacement Battery Gripandnbsp; for Sony VG-C77AM Works with 1pcs or 2pcs NP-FM500H Li-po Battery for Sony SLT-A77V SLT-A77 Camera Specially designed for Sony SLT-A77V / SLT-A77 DSLR cameras. Can hold one or two NP-FM500H rechargeable batteries. Replacement forandnbsp; Sony VG-C77AM battery grip. Effectively extend your shooting time and enable shooting

Neewer Meike AE Lock Functional Replacement Battery Grip for VG-C1EM Works with NP-FW50 Battery for Sony A7 A7R A7S Neewer Vertical Battery Grip Holder without Remote for Sony A7 A7r A7s DSLR Camera Compatible withandnbsp; NP-FW50 Batteriesandnbsp; Note: Camera is NOT included. Features: With vertical-shooting function. Two lithium batteries can be put into the grip, with make it have double power. With AF(auto focus)/MF(manual focus)/AEL(AE lock) functions. C1 custom function. With two wheels which are convenient for operation. Without wireless remote. Specifications: Working Voltage: 7.2v - 8.4v Working Current: less than 3A Working Temperature: -20 degree to 70 degree Applicable battery: NP-FW50 (not included) IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Meike Vertical Battery Grip Replacement for VG-C90AM Works with NP-FM500H Battery Pack for Sony Alpha A850 A900 DSLR Product Description: Vertical Battery Grip for the Sony α (Alpha) DSLR-A850 andamp; A900 functions as both a high capacity battery pack and a vertical grip. It can one or two NP-FM500H Li-ion batteries, doubling the battery capacity of your camera. Vertical shutter release button on the Battery Grip makes shooting with the camera

Neewer Meike Multi-power Vertical Battery Grip Replacement for MB-D51 Works with EN-EL14 Battery for Nikon D SLR camera Description: 100%compatible for Nikon D. Allowvertical shutter and half press focus of the vertical shutter. Combinesthe functions of a high-capacity battery pack with a vertical grip. Canhold one or two EN-EL14 battery packs to provide approximately twice theshooting capacity of the camera alone Compatibility:Nikon D IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Meike Vertical Battery Grip Works with LP-E10 Li-ion Battery for Canon EOS D D / Rebel T3 T5 Product Description: This Battery Grip for Canon D D / T3 T5 makes photographing

Neewer® Meike ABS AF Auto-focus Macro Extension Tube Set 10mm&16mm for Sony E-Mount NEX-7 NEX-6 NEX-5 NEX-5R NEX-5N NEX-5C NEX-5T NEX-3 NEX-3N NEX-F3 NEX-C3, and A7/ A7R/ A7S/ A7 II / A Product Features 2 Piece Extension Tube Set for MK-S-AS3B, made of ABS. Compatible with Sony NEX, E-mount series Micro DSLR. Support Exact TTL Exposure and Auto-focus;Built-in Electronic Pins and internal driver. New adapter aperture hole design, perfectly support Sony full-frame camera A7/A7R/A7S/A7 II. Including two tubes(10mm, 16mm), 3 different combinations. Description Description: Note:Camera and lens not included! This high quality automatic macro Extension Tube Set is designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject (making it appear larger

Neewer DSLR LCD Optical Glass Screen Protector for Canon 7D Cameras   Description: This GGS LCD screen protector is for 3.0'' LCD digital camera, which is completely different from the traditional plastic protective film. GGS LCD screen protector is using ultra thin optical glass and special processing, it is high transparency, anti-scrape, anti-bump, anti-aging and easy to install. It uses a 0.5mm ultra thin optical glass with at least 90% transmittance. It has higher transparency than other LCD screen protector. It is as hard as 8H and it can bear a heavy burden (12kg/cm2), also it can prevent from being rubbed, scraped and bumped. It is well sealed by 3M double side adhesive tape which is not easy to be unglued and easy to be installed. There is no air bubble or angle occurs during sticking on the equipment. It will not affected by the temperature and humidity. It prevents the LCD screen infracted by sweat stain, smear, acid and alkali element and prolongs the life of the screen. It can be removed and reused if the glutinosity hasn't been damaged. This LCD Screen protector fit for all 3.0'' LCD main screen digital camera. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Hard LCD Optical Glass Screen Protector (Nikon D3/D3X) Descriptions: This LCD Screen protector fit for Nikon D3/D3X digital camera. It is made of 0.5mm optical glass to provide the highest protection for your valuable cameras. This protector get over 95% transparent rate, to show the clear image of the LCD screen. The hardness of the surface is 8-9H, and support up to 4KG/m^2, highly resist to scratches and shock. It also protects the LCD screen away from UV light. Features: It is made of 6 protection layers: Protection layer, Coating layer, Transparent layer, Colour layer, mount layer, clinging layer.   Easy to Install: No trimming required, fit directly on your LCD screen. Just clean your LCD screen first, peel off the white back of the protector to stick, Done! Easy to install and bubbles free, unlike plastic protector which always gives you bubbles between the protector and the screen. No adhesive backing at the LCD screen, only at the border of the film for clearness. Can be removed and reinstall, without leaving ugly residual on your LCD screen. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

NEEWER Digital LCD Clip Guitar Tuner With 3V CR2032 Lithium Battery Product Features Digital LCD Clip Guitar Tuner^Clips on to instrument.Bright LCD Screen^It can adjust at your suitable angle simple and practical It can 360-degree freely turn.Mini clip design convenient to use^Matched with 3V CR2032 lithium battery.^It is designed for tuning chromatic guitar bass violin Description Specifications: A4 Frequency: 430-450Hz Tuning type: Guitar, Bass Guitar,Chromatic, Bass, Violin, Ukulele etc. Tuning Range: A0(27.5Hz)--a3(1760Hz) Item size: 4.5 * 3.5 * 4.1cm Weight: 30g Screen: LCD display Power: 3V Package Contents: Digital LCD Clip Guitar Tuner Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer Buckled LCD Screen Protector for Canon 7D Mark II Camera Neewer GGS Buckled LCD Screen Protector 0.3mm Ultra-thin Optical Glass Screen Protector Six Layers Self-adhensive Frame Design Monitor Protective Cover for Canon 7D Mark II Camera Description: With buckled design, it matches the DSLR camera precisely. Designed to protect screen from scratches or damage. It is applied on the screen gapless as it is glass adhensive and injected color frame design, so it doesn’t affect sensitivity of touch/ swivel screen. Easy to install and no sticky residue. Six Layers:     Precise polishing layer     0.3mm glass layer     Frame layer     Combination layer     Shatter-proof layer     Silicone adhensive layer   Features:     Specially designed for Canon 7D Mark II Camera     Glass Self-adhensive installation     Optical Glass Ultra-clear Version: Anti-aging Anti-dust Anti-sweat     Anti-scratch Shatter-proof Anti-collision     Color frame Anti-glare: Unified with Camera     Touch/ Swivel Screen Friendly Specification:     Material: Optical Glass     Thickness: 0.3mm     Adsorption: 130g/cm 2     Coating: Six Layers     Elastic Pressure: 12kg/ cm2     Adhensive power:130g/cm 2     0.3mm Ultra-thin Glass     Light transmittance>90% Note: Camera Not Included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer GGS LCD Screen Protector for Nikon D810 Camera Neewer GGS LCD Screen Protector 0.3mm Ultra-thin Optical Glass Screen Protector Six Layers Self-adhensive Frame Design Protector for Nikon D810 Camera   Description: Designed to protect screen from scratches or damage. It is applied on the screen gapless as it is glass adhensive and injected color frame design, so it doesn’t affect sensitivity of touch/ swivel screen. Easy to install and no sticky residue. Six Layers:     Precise polishing layer     0.3mm glass layer     Frame layer     Combination layer     Shatter-proof layer     Silicone adhensive layer   Features:     Specially designed for Nikon D810 Camera     Glass Self-adhensive installation     Optical Glass Ultra-clear Version: Anti-aging Anti-dust Anti-sweat     Anti-scratch Shatter-proof Anti-collision     Color frame Anti-glare: Unified with Camera     Touch/ Swivel Screen Friendly Specification:     Material: Optical Glass     Thickness: 0.3mm     Adsorption: 130g/cm 2     Coating: Six Layers     Elastic Pressure: 12kg/ cm2     Adhensive power:130g/cm 2     0.3mm Ultra-thin Glass     Light transmittance>90% Note: Camera Not Included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer MK-RC10N s Wireless LCD TTL Single Studio Flash Trigger for Nikon Neewer Meike MK-RC10N 2.4GHz Wireless LCD s HSS TTL Studio Flash Speedlite Trigger Transceiver for Nikon D610 D800E D800 D700 D300s D300 D600 D D D D D90 D4s D3 2.4Ghz 14 Selectable Channels. Set power ratios of up to 15 groups of remote flashes.       Operating Distance: 60m Support High-speed Sync,Studio Flash Trigger Sync and Wireless Remote Shutter Release. Support different flash speed,can reach sec. Support Nikon I-TTL mode as well as BL,FP. Support front sync and rear sync. LCD shows wireless channel,grouping power and modes. Feature: 1.Frequency: 2.4Ghz 2.14 Selectable Channels. Set power ratios of up to 15 groups of remote flashes. 3.Operating Distance: Up to 60m. 4.Support Nikon I-TTL mode as well as BL,FP. Support front sync and rear sync. 5.Support different flash speed,can reach sec. 6.Compatible with CLS creative flash systerm by nikon.     7.Control bracketing compensation through directly operating camera. 8.Can control many speedlites and studio flash lights. 9.Can control spotlight through PC port and the highest speed can reach sec. 10.LCD shows wireless channel,grouping power and modes. Compatible with Nikon cameras   D610 D800E D800 D700 D300s D300 D600 D D D D D90 D4s D3 Package Contents: MK-RC10N flash remote transceiver for Nikon x1 N3 cable x1 Note: This item is not compatible with D70S D80 IMPORTANT NOTE: This product will be imported against receiving your order. If the product is