Particle board back

Back light flex board iron frame 28×3 feet. Made with heavy iron pipes new frame for immediate sale

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Quad Processor Q8200  (4M Cache, 2.33 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Duo Processor E6850  (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line

Zebronics DG41 Combo Board LGA775 Board Support DDR2 and DDR3 RAM Intel® Pentium® Processor E5400 (2M Cache, 3.00 GHz, 800 MHz FSB) LGA 775 Socket DDR3 2GB RAM Intel Fan Back Panel is Available, No Box and No Driver CD Available Note: The board has only two RAM ports, One for DDR3 and One for DDR2   Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Quad Processor Q8200  (4M Cache, 2.33 GHz, 1333 MHz FSB) DDR2 2GB RAM (1+1=2GB) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Asus P5KPL-AM/PS G31 Motherboard LGA775 Socket Support DDR 2RAM Intel® Core™2 Duo Processor E6850 (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR2 2GB RAM (Single Ram) Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  https://www.asus.com/Motherboards/P5KPLAMPS/ CPU Intel® Socket 775 for Intel® Core™2 Extreme/Core™2 Quad / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D / Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Intel® Hyper-Threading Technology ready  * Refer to www.asus.com for Intel CPU support list  Chipset Intel® G31 Intel ICH7  Front Side Bus 1600*/1333/1066/800 MHz *Overclock speed Memory 2 x DIMM, Max. 4 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory Dual Channel memory architecture *Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  **When installing total memory of 4GB capacity or more, WindowsR 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel Graphics Media Accelerator (Intel® GMA 3100)  Max. resolution:2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports  LAN Realtek RTL8111C Gigabit LAN  Audio Realtek ALC662 6 -Channel High-Definition Audio CODEC  Anti-Pop Function  Jack-detect & Multi-Streaming  Support S/PDIF Out connector USB 8 USB 2.0 ports (4 ports at mid-board, 4 ports at back panel) ASUS Unique Features ASUS CrashFree BIOS 3  ASUS Q-Fan  ASUS EZ Flash 2  ASUS MyLogo 2  Power Stabilizer  Back Panel I/O Ports 1 x PS/2 Keyboard  1 x PS/2 Mouse  1 x VGA  1 x COM  1 x Parallel port  1 x LAN (RJ45) port  4 x USB 2.0  6 Channel Audio I/O Internal I/O Connectors 2 x USB connectors support additional 4 USB ports  4 x SATA connector  1 x IDE connector  1 x Floppy disk connector  1 x internal speaker connector  1 x CPU Fan connector  1 x High Definition front panel audio connector  1 x S/PDIF Out connector  1 x CD audio-in connector  24-pin EPS 12V Power connector  4-pin ATX 12V Power connector  1 x System panel connector  1 x COM connector  BIOS 8 Mb Flash ROM  DMI 2.0 AMI BIOS  PnP WfM 2.0  SM BIOS 2.5  ACPI 2.0  Manageability WOL,PXE,RPL,WOR,PME Wake Up Form Factor uATX Form Factor  9.6 inch x 8.35 inch (24.4 cm x 21.2 cm)    Return Policy Returns will only be accepted if the item is not as described as above. No returns are accepted if u doesn’t like the item or features of the item, so make sure there are all the features in the item which you need before placing the order. We always shipped tested and working item. If item does not work at arrival. It due to transit damaged. So kindly don’t left negative or neutral feedback. Send back the non working item and get your refund or replacement. Delivery only via DTDC Courier. Please Open the Package IN FRONT OF Courier Person Any Claim of Item Missing, Damaged WILL NOT BE ENTERTAINED if NOT REPORTED to COURIER BOY. DO NOT Accept the item

Package Contents 1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has one (1) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free wheeling diode which will further protect your microcontroller from relay kick back. This is a 12V 1-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Free wheeling diode to protect your microcontroller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and Transistor will further protect your micro-controller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - BC 547 Transistor used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Gigabyte GA41MT LGA775 Socket Board Support DDR3 RAM Intel® Core™2 Duo Processor EM Cache, 2.66 GHz, MHz FSB) DDR3   2GB   RAM   MHz Back Panel is Available No Driver CD and Back Panel is Available About Board: http://www.gigabyte.in/products/product-page.aspx?pid=#ov Next Generation High Quality Components and 4 Phase CPU Power Design   GIGABYTE was the first motherboard manufacturer to realize the importance of using only the highest quality components for the critically important CPU VRM zone of the motherboard which is responsible for delivering stable power to the CPU. The GIGABYTE Ultra Durable™ 2 design utilizes Solid Capacitors manufactured

Gigabyte GA41MT LGA775 Socket Board Support DDR3 RAM Intel® Core™2 Duo Processor E6750 (4M Cache, 2.66 GHz, 1333 MHz FSB) DDR3   2GB   RAM   1333MHz Back Panel is Available No Driver CD and Back Panel is Available About Board: http://www.gigabyte.in/products/product-page.aspx?pid=3743#ov Next Generation High Quality Components and 4 Phase CPU Power Design   GIGABYTE was the first motherboard manufacturer to realize the importance of using only the highest quality components for the critically important CPU VRM zone of the motherboard which is responsible for delivering stable power to the CPU. The GIGABYTE Ultra Durable™ 2 design utilizes Solid Capacitors manufactured

Gigabyte GA41MT LGA775 Socket Board Support DDR3 RAM Intel® Core™2 Quad Processor Q6600  (8M Cache, 2.40 GHz, 1066 MHz FSB) DDR3   2GB   RAM   1333MHz Back Panel is Available No Driver CD and Back Panel is Available About Board: http://www.gigabyte.in/products/product-page.aspx?pid=3743#ov Next Generation High Quality Components and 4 Phase CPU Power Design   GIGABYTE was the first motherboard manufacturer to realize the importance of using only the highest quality components for the critically important CPU VRM zone of the motherboard which is responsible for delivering stable power to the CPU. The GIGABYTE Ultra Durable™ 2 design utilizes Solid Capacitors manufactured