Power consumption dc

With power indicator ● With the voltmeter shows that the use of advanced microprocessors, voltmeter error ± 0.05V, range 0 ~ 40V. (Note: To ensure accuracy voltmeter, please ensure that the input voltage is 4V above) ● Tap the right button to switch the input or output voltage measurements and has a light display which is being measured voltages, and save the settings, even then boot off ● voltmeter can be turned off when not needed can easily touch the left button ● With terminals, no soldering iron can also be easy to use, and retention wire connection points Input Voltage V (input voltage must be higher than the output voltage of 1.5v or more.) ● Adjustable output voltage range of 1.25V ~ 37V continuously adjustable (1.5V input voltage must be higher than the output voltage) ● Maximum output current up to 3A, normal and stable operating current of 2A ● using the internal oscillator frequency 150KHz, which belongs to the second generation of switching voltage regulator, power consumption, high efficiency. ● With overheat protection and short circuit protection

Feature: color: black casing material: plastic outer dimensions:80*60*78mm(L x W x H)  Connection thread size: G1/4"input and output power connector:3 pin Nominal operating voltage:DC12V starting voltage:DC8V power consumption:10W current draw:1A max pressure head:4m flow rate:500L/h Lifespan:50000hours Noise: below 30bd Package: 1pcs water pump Feel free to call us at 011-25390245 if you need more details about the product.

This AC/DC power adaptor normally used with any electronic devices that require following  power specifications.  Specifications INPUT V (AC) ~ Hz mA OUTPUT 14V ~ 3A /mA (DC) CONNECTOR SIZE Inner Diameter: 5.5MMXMM (Standard size dc pin) GRIP TYPE - YELLOW CONNECTOR (SEE SECOND IMAGE) polarity: + inside / - outside SMPS Based power supply  DC PLUG CORD LENGTH:  1.5M POWER CORD USED - PC TYPE PLUG (NOT INCLUDED)

DC to DC Buck Power Converter Module LM Original, Best Quality @ Lowest Price Features • Adjustable Output Voltage Range 1.23 V − 37 V  • Guaranteed 3.0 A Output Load Current  • Wide Input Voltage Range 3V to 40 V  • 150 kHz Fixed Frequency Internal Oscillator  • TTL Shutdown Capability  • Low Power Standby Mode, typ 80 A  • Thermal Shutdown and Current Limit Protection  • Internal Loop Compensation  • Moisture Sensitivity Level (MSL) Equals 1  • Pb−Free Packages are Available  Applications  • Simple High−Efficiency Step−Down (Buck) Regulator  • Efficient Pre−Regulator for Linear Regulators  • On−Card Switching Regulators  • Positive to Negative Converter (Buck−Boost)  • Negative Step−Up Converters  • Power Supply for Battery Chargers • Solar Projects • Robo Power Supply  :Package Includes: 1 X LM DC to DC Buck Converter Module For any  queries  please feel free to write us using  "Ask Seller a Question"  link  OR  Call us on  DC to DC Buck Converter Module LM Based, LM, DC to DC, Converter, Buck, Buck Converter, LM DC to DC Buck Converter Module,

DC 12V-40V Large Torque PWM Motor Speed Controller Reversible Control Switch Specifications High Power, High efficiency, Large torque The motor speed controller incorporates a high power MOSFET with a heat sink and can easily provide a continuous current of 3A to your DC motor or other DC load With switch function and Reversible Control function Onboard 10A fuse, with reverse power, over voltage, high current protection function Mode:CCM2NJ Input supply voltage:VDC(max) Maximum output power:120W rated current: 3A Maximum continuous output protecting current:5A PWM frequency: 15kHz Duty Cycle adjustable:% Indicator: Power-On LED Size: 70x39x31mm/2.75"x1.53"x1.22"(approx) Color: as the picture show Package includes 1 x PWM DC Reversible Motor Speed Controller Images Click here to check out our other products

DC Power 4.8x1.7mm To 7.4x5.0mm & Pin Cord M/F Adapter Cable For HP DELL Laptop     Condition: 100% Brand New and High Quality Quantity: 1 Pcs   Spec:     DC Tip Plug Connector Cable, 4.8x1.7mm Male To 7.4 x 5.0mm & Central Pin Female adapter HP small power charge cord To HP big power charge cord or Dell power charge cord.  Connector: Male: Outside diameter: 4.8mm Inside diameter: 1.7mm Female: Fits the male dc tip of outside diameter: 7.4mm, inside diameter: 5.0mm with central pin  Length: full 15.7Cm APROX

Power Adaptor 12 Volt 1 Amp Charger AC INPUT V DC OUTPUT 12V 1A   Product Description:   Professional 12 Volt DC 1 Amp power supply is suitable for powering a wide range of applications including CCTV cameras and wireless routers.   Features: 100% Brand New Excellent Quality Short Circuit, Over Voltage & Over Current Protection. Meet CEC Energy Efficiency Level IV. Incredibly Low Fault Rates No Minimum Load. This power supply is a regulated Center Positive power supply and has a 2.1mm x 5.5mm Jack It's plug design is for Indian power socket. So, no plug converter is required. Compact size & light weight. High Reliability. Regulated Stable Voltage. Good quality SMPS Based Adapter Power LED Monitor (LED Glow when

DC DC Converter Step Up Boost Module 3V To 5V 1A (mA) USB Charger Module Can charge USB devices rapidly using High Power switching upto mA @ 5V output Features： Module Properties: non-isolated step-up module (BOOST) input voltage: V Output voltage: 5V Output Current: the maximum mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage regulation: ± 2.5% Size:mm(L*W*H) Specification: Module uses switching chopper booster chip, high efficiency (maximum 92%), and at the same time heat dissipation is small, and chip has its own over-current protection function. Under-voltage protection function, if less than 2.5 V,it drives itself into under-voltage protection condition (good battery protection, avoids excessive discharge and damage). 5W Output Power(MAX). This module USES a TDK laminated ceramic capacitor as the main filtering capacity, can make the output ripple low to 20 mv (5 v1a output cases) Standard USB interface, can be used for USB charging of mobile phones, MP3, MP4 and other equipment. Package Contents: 1 x DC boost USB module Shipping through DTDC/Trackon/OnDot/Madhur/Speedpost                                 For more information on our products and shipping please email us at     Please note that  All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items.  These are imported electronic items and can  easily  get damaged by mishandling or wrong connections.  Please Buy only if you can understand the product and its working well.  All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

DC/DC 3.3V AMSV Power Supply Module Voltage Regulator Description: 2P single row pin input and output for easy connection Dual-panel design, the layout is nice Specially designed two rows of needle fixing holes can be fixed directly

DC to DC Boost Power Converter Module XL Original, Best Quality @ Lowest Price Features Wide 5V to 32V Input Voltage Range Wide Output Voltage 5V to 35V Fixed 400KHz Switching Frequency Maximum 4A Switching Current Excellent line and load regulation High efficiency up to 94% Built

DC Motor / Stepper Driver H Bridge Controller This motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc This is a high power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L298 motor driver IC and has onboard 5V regulator which it can supply to an external circuit. It can control upto 4 DC motors, or 2 DC motors with directional and speed control It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels

DC Motor / Stepper Driver H Bridge Controller This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc. This is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control. The driver greatly simplifies and increases the ease with which you may control motors, relays, etc from microcontrollers. It can drive motors upto 36V with a total DC current of up to 600mA. You can connect the two channels

DC PWM V Motor Speed Control 10A Pulse Width Modulator Controller Switch Features Power requirement:V Rated current:10A(Maximum output current) PWM Frequency:HZ Control Motor Power:12V:120W(max),24V:230W(max) Regulation range:% The Pulse type is 10A,High-current protection,or Short-circuit current protection Dimension:80mm x 30mm x 55mm(about) Quantity:1PC Package includes 1 x PWM DC Motor speed controller Images Click here to check out our other products

Power dc cable with 5-pin magnetic Head for Apple MacBook Pro,Macbook Air 45w/60w/85W Laptops Specification: Color: white DC connector: 5-pin for magnetic Head Gauge: 20AWG Wire length: 1.8m Warranty: 6 months for MacBook laptops No Need to Change Adapter- Just change Adapter DC Cord of 45w, 60w, 85w Adapters of Apple for query contact any time - +

DC 12V TO AC 220V (lot ka maal hai half price me new inverter)15 PCS HAI MINI COOLER 25 PCS HAI ( PER PCS.400RS.)