Resistor transistor diode

SMALL  DIGITAL MULTIMETER       Small Multimeter for your day to day needs If you have basic knowledge about Multimeters you can try this small Multimeter for basic continuity checks & Voltage Meaurements      Description 1.  Functions DCV ACV DCA Resistor (ohms) Diode Buzzer Transistor (HFE) Temperature Square Wave Output Battery Test   2.  Display 4.75 cm length, 15mm high LCD. 3.  Operating Instructions When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to "V 0 mA" jack and black test lead to "COM" jack. When testing the current more than 200mA, connect the red test lead to "' OADC" jack and black test lead to •COM" jack When testing the temperature, connect the temperealure probe to "V, 0, mA" jack or "COM" jack. It can also be connected to the jack specialised for it. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight-hole jack. Square wave output: the frequency is 50Hz, the voltage is approx. 3Vp-p. The output jack is "V, 0, mA" and •COM". General Powered by 9V Battery Inside Dimensions Multimeter : 12.5 cms(Length) X 6.75 cms(Width) X 2.25 cms (Thickness) Wire Length (Including Pin): 71 cms each              

we only accept Paisapay New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 DESCRIPTION-:   Mastech  Digital Multimeter (M92A) Diode test, transistor test, continuity buzzer M92a 3 1/2 digital multimeter Diode test, transistor test, continuity buzzer Function range accuracy DC voltage 200mv-v ± (0.5%+1dgt) AC voltage 200mv-750v ± (0.8%+3dgt) DC current 200µ A-20a ± (0.8%+1dgt) AC current 2ma-20a ± (1.0%+3dgt) Resistance mω ± (0.8%+1dgt) Diode test yes Transistor test yes Continuity buzzer yes Power supply 9v battery 6f22 Maximum display Weight 250g Products size mm Standard accessories test lead, battery, manual, holster We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

MASTECH MS TWEEZERS SMART SMD RC RESISTANCE CAPACITANCE DIODE METER TESTER DESCRIPTION-:   MASTECH MS TWEEZERS SMART SMD RC RESISTANCE CAPACITANCE DIODE METER TESTER AUTO SCAN Small size and light weight, handheld and portable test tool. Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices. Auto scanning, it identifies resistor, capacitor and diode automatically. Continuity testing. When the resistance is less than 30Ω, it will sound. It also can be operated manually. You can press the button “FUNC” to select one certain measuring mode. Has the function of data hold. Long press the “FUNC” key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication. Gold-plated test pins, which can induce its contact resistance and prevent it from rusting. Certificate: EMC. Specifications: Display: count LCD display Power supplied by: 1 * 3V CR battery Operating temperature: 0 to 40 Celsius degree Operating humidity: ＜80%RH Storage temperature: -10 to 50 Celsius degree Storage humidty: ＜70%RH Resistance measurement: Auto scanning range: Ω to MΩ Manual measuring range: Ω to MΩ Capacitance measurement: Auto scanning range: nF to μF Manual measuring range: nF to mF Item size: cm/ in Item weight: 46g/ 1.6oz Package size: cm/ in Package weight: 142g/ 5oz

we only accept Paisapay Mastech Digital Multimeter (M92A) Diode test, transistor test, continuity buzze  

New Page 1 New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 DESCRIPTION-: Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 Meter Digital Mutimeter Voltage Amp Current Resistance Meter   DESCRIPTION-:   Meter Digital Mutimeter Voltage Amp Current Resistance Meter This meter is Polarity & overload protected.     3 1/2" LCD display.     Red and Black test leads are included.     Seven functions + nineteen ranges to cover       Ideal tool for checking Electronic Products Operation instruction:- 1) when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "vo, mA" jack and black test lead to "COM" jack. 2) when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. 3) when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. 4) sqaure wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V,0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V,  DC current 200 microamp-10 Amp,  Resistance meg Ohm and Transistor & diode test. AC and DC voltage  resistance DC amps  battery and diode testing   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

NEW DIGITAL MULTI METER SOLVE ALL SMALL PROBLEM YOURSELF This meter is Polarity & overload protected. 3 1/2" LCD display. Red and Black test leads are included. Seven functions + nineteen ranges to cover     Ideal tool for checking Electronic Products   Operation instruction when testing DC voltage, AC voltage, DC current resistance, diode, buzzer and battery, connect the red test lead to "v o, mA" jack and black test lead to "COM" jack. when testing the current more than 200m A, connect the red test lead to "10ADC" jack and black test lead to "COM" jack. when testing the temperature, connect the temperature probe to "V,  0  mA" jack or "COM" jack It can also be connect to the jack specialised for it. when testing the magnifying ratio of the transistor, tum the switch to hFE position and connect the transistor to the eight-hole jack. squre wave output: the frequency is 50Hz, the voltage is approx 3Vp-p The output jack is "V, 0, mA" and "COM Scales are:- DC voltage 200mV to 1kV, AC voltage 200V-750V, DC current 200 microamp-10 Amp, Resistance meg Ohm and Transistor & diode test. AC and DC voltage resistance DC amps battery and diode testing

New Page 1 New Page 1 BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm                   Description:- BRANDED UT51 Standard Digital Multimeters AC/DC Resistance Meter Volt Ohm SPECIFICATIONS Basic Functions Range Best Accuracy DC Voltage 200mV/2V/20V/200V/V (0.5%+1) AC Voltage 200mV/2V/20V/200V/750V (0.8%+3) DC Current 20mA/200mA/2mA/20mA/200mA/2A/10A (0.8%+1) AC Current 200mA/2mA/20mA/200mA/2A/10A (1%+3) Resistance 200W/2kW/20kW/200kW/2MW/20MW/200MW (0.8%+1) Special Functions     Fused 10A Range          Transistor          Diode          Continuity Buzzer          Sleep Mode          Low Battery Display          Input Impedance for DC Voltage Measurement 10MW          Max. Display         

New Page 1 New Page 1 DESCRIPTION-: MASTECH MS Tweezers Smart SMD RC Resistance Capacitance Diode Meter Tester Auto Scan Small size and light weight, handheld and portable test tool. Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices. Auto scanning, it identifies resistor, capacitor and diode automatically. Continuity testing. When the resistance is less than 30Ω, it will sound. It also can be operated manually. You can press the button “FUNC” to select one certain measuring mode. Has the function of data hold. Long press the “FUNC” key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication. Gold-plated test pins, which can induce its contact resistance and prevent it from rusting. Certificate: EMC. Specifications: Display: count LCD display Power supplied by: 1 * 3V CR battery Operating temperature: 0 to 40 Celsius degree Operating humidity: ＜80%RH Storage temperature: -10 to 50 Celsius degree Storage humidty: ＜70%RH Resistance measurement: Auto scanning range: Ω to MΩ Manual measuring range: Ω to MΩ Capacitance measurement: Auto scanning range: nF to μF Manual measuring range: nF to mF Item size: cm/ in Item weight: 46g/ 1.6oz Package size: cm/ in Package weight: 142g/ 5oz

we only accept Paisapay New Page 1 DESCRIPTION-: MASTECH MS Tweezers Smart SMD RC Resistance Capacitance Diode Meter Tester Auto Scan Small size and light weight, handheld and portable test tool. Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices. Auto scanning, it identifies resistor, capacitor and diode automatically. Continuity testing. When the resistance is less than 30Ω, it will sound. It also can be operated manually. You can press the button “FUNC” to select one certain measuring mode. Has the function of data hold. Long press the “FUNC” key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication. Gold-plated test pins, which can induce its contact resistance and prevent it from rusting. Certificate: EMC. Specifications: Display: count LCD display Power supplied by: 1 * 3V CR battery Operating temperature: 0 to 40 Celsius degree Operating humidity: ＜80%RH Storage temperature: -10 to 50 Celsius degree Storage humidty: ＜70%RH Resistance measurement: Auto scanning range: Ω to MΩ Manual measuring range: Ω to MΩ Capacitance measurement: Auto scanning range: nF to μF Manual measuring range: nF to mF Item size: cm/ in Item weight: 46g/ 1.6oz Package size: cm/ in Package weight: 142g/ 5oz

New Page 1 New Page 1 MASTECH MSE Counts Digital Multimeter with NCV & Inductance LCR Description: The Mastech MSE is a fully featured digital multimeter with all the functions you may need for your daily usage. Its 30-range rotary switch covers 10 different functions including AC/DC voltage and current, resistance, capacitance, inductance, diode check, continuity test and transistor check. This meter also has a built-in non-contact sensor for detecting AC voltage greater than 110 volts.   Features: Large counts LCD display Built-in non-contact voltage detector Tests AC/DC voltage and current, resistance, capacitance Inductance measurement up to 20H Transistor (hFE) check, diode and continuity test Data hold and display back light Safety rating up to CAT.IV 600V Non-Contact Voltage Detector   Specifications:   DCV:mV - 2V - 20V - 200V ± V ± 0.8% ACV:0 - 2V - 20V - 200V ± V ± 1.2% DCA:mA ± A ± 2.0% ACA:mA ± A ± 3.0% R:k - 20k - 200k - 2M ± M ohm ± M ohm ± 5.0% CAP:0 - 20nF - 200nF - 2uF ± uF ± 5.0%; INDUCTANCE: 0 - 20mH - 200mH - 2H - 20H ± 3.0% Audible continuity: hFE: Diode test: 1 mA, 2.8V; Battery: 9Vx1, NEDA F22   Key features: Built-in non-contact AC voltage sensor with flash warning (> 110V AC) Auto power off Data hold Back-lit 3 1/2 digit LCD display Low battery indication Polarity indication Includes: MSE Test leads User manual We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

we only accept Paisapay New Page 1 MASTECH MSE Counts Digital Multimeter with NCV & Inductance LCR Description: The Mastech MSE is a fully featured digital multimeter with all the functions you may need for your daily usage. Its 30-range rotary switch covers 10 different functions including AC/DC voltage and current, resistance, capacitance, inductance, diode check, continuity test and transistor check. This meter also has a built-in non-contact sensor for detecting AC voltage greater than 110 volts.   Features: Large counts LCD display Built-in non-contact voltage detector Tests AC/DC voltage and current, resistance, capacitance Inductance measurement up to 20H Transistor (hFE) check, diode and continuity test Data hold and display back light Safety rating up to CAT.IV 600V Non-Contact Voltage Detector   Specifications:   DCV:mV - 2V - 20V - 200V ± V ± 0.8% ACV:0 - 2V - 20V - 200V ± V ± 1.2% DCA:mA ± A ± 2.0% ACA:mA ± A ± 3.0% R:k - 20k - 200k - 2M ± M ohm ± M ohm ± 5.0% CAP:0 - 20nF - 200nF - 2uF ± uF ± 5.0%; INDUCTANCE: 0 - 20mH - 200mH - 2H - 20H ± 3.0% Audible continuity: hFE: Diode test: 1 mA, 2.8V; Battery: 9Vx1, NEDA F22   Key features: Built-in non-contact AC voltage sensor with flash warning (> 110V AC) Auto power off Data hold Back-lit 3 1/2 digit LCD display Low battery indication Polarity indication Includes: MSE Test leads User manual We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us