Rf module

DESCRIPTION 15 MHz ASK Transceiver Module Transmitter: The 315 MHz transmitter will work with the RF Links at 315 MHz at either baud rate. Only one 315 MHz transmitter will work within the same location. This is an ASK transmitter module with an output of up to 8mW depending on power supply voltage. The transmitter is based on SAW resonator and accepts digital inputs, can operate from 2 to 12 Volts-DC, and makes building RF enabled products very easy. Receiver: This receiver type is good for data rates up to bps and will only work with the 315 MHz transmitter. Multiple 315MHz receivers can listen to one 315 MHz transmitter. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The receiver is operated at 5V. We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a controller, you have an instant wireless data connection. The typical range is 500ft for open area. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, and even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The transmitter operates from 2-12V. The higher the Voltage, the greater the range - see range test data in the documents section. Specifications RF Transmitter Features Frequency Range: 315 MHZ. Supply Voltage: 3~12V Output Power: 4~16dBm Circuit Shape: Saw RF Receiver Features Receiver Frequency: 315 MHZ Typical sensitivity: -105dBm Supply Current: 3.5mA Frequency: 1MHz Low power consumption Operation voltage: 5 Volts We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Wireless 4 Channel Robot Control Kit With Dual DC Motor Drive 433Mhz RF  Best Quality @ Lowest Price Control your robot from remote using this 4 channel wireless remote control kit. Kit comes with one 4 channel wireless transmitter with push buttons on-board for sending commands to receiver unit to control the robot. Receiver unit comes with on-board L293D bidirectional dual DC motor driver. Simply Connect 9V battery to Transmitter and proper power source to receiver, connect two DC motors on receiver module and you are ready to control your two or four wheel drive robot within few minutes. You can easily control your robot reverse, forward, left & right. Description Transmitter Input Supply: 9V Battery Receiver Power Supply: 9 - 15 V DC through Battery OR Power Adapter DC Motor Output Channel: 2  Output Current Per Channel: 600 mA (Can Easily drive BO Motors OR Plastic Gear Robotic Motors) Address Selection: 8 BIT On-board DIP Switch RF Frequency: 433Mhz USE: Indoor & Outdoor Applications  Robot Controller, Wireless Remote Controller, Wireless Switching, Wireless Dual DC Motor Drive, DIY Robotic Kits:Package Includes: 1 X 4 Channel Wireless Transmitter 1 X 4 Channel Wireless Receiver With On-board Dual DC Motor Driver 1 X 9V Battery Clip (9V Battery Is not Included) For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller,

This RF modulecomprises of an RF Transmitterand an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 434 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps - 10Kbps.The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter. The RF module is often used alongwith a pair of encoder/decoder. The encoder is used for encoding parallel data for transmission feed while reception is decoded by a decoder. HT12E-HT12D, HT640-HT648, etc. are some commonly used encoder/decoder pair ICs.

An RF module (short for the radio-frequency module) is a (usually) small electronic device used to transmit and/or receive radio signals between two devices. In an embedded system it is often desirable to communicate with another device wirelessly. This wireless communication may be accomplished through optical communication or through radio-frequency (RF) communication. For many applications, the medium of choice is RF since it does not require a line of sight. RF communications incorporate a transmitter and a receiver.

Application: RF Controlled Robot Using RF Encoder and Decoder Module: Robosoft Labs RF Encoder & Decoder Interfacing board with HT12D & HT12E IC chips. Features: Easy interfacing with the RF modules, using the female headers for placing the modules. Breakout pins for connecting to the microcontroller. switch for manual Testing Status LED and switch button. Small size, high quality PCB.  Package Contents: 1 piece of RF encoder and decoder board with HT12E/HT12D IC chips. Applications: 1) RF Controlled Robot Using RF Encoder and Decoder Module: Robosoft Labs 2) Home Automation 3) Switch On/Off lights and other home appliances through with RF

Description: The TX is an ASK transmitter module.The TX isdesigned specifically for remote-control, wireless mouseand car alarm system operating at MHz.The RX is a miniature receiver module that receives On-offkeyed (OOK)modulation signal and demodulated to digital signal for the next decoder stage.The RX is designed specifically for remote-control and wireless security receiver operating at Mhz. UART TTL o/p - Baud Rate - . Features: Input Power supply - 5 Volts Compatible for Both RF Mhz Interface upto 8 Bit Data. UART TTL o/p - Baud Rate - Package Includes with RF Tx Rx. Indicating LED's. High quality PCB FR4 Grade with FPT Certified.     Package Contains: RF TX RX with 8 Bit Encoder and Decoder. Billing: Xbee Development Board(RDL/GRS//V1.0) VAT Bill is included. Rules and Regulations: All Items

The Receiver is an ASK Hybrid receiver module. It is a effective low cost solution for using MHz. The Transmitter is an ASK hybrid transmitter module. It is designed by the saw resonator, with an effective low cost, small size and simple to use for designing.   Low Power Consumption Easy For Application Range

VISIT BELOW LINK FOR MORE DETAILS http://www.ifuturetech.org/product/wireless-module/ Features  1. More than 100 Meters range

VISIT BELOW LINK FOR MORE DETAILS http://www.ifuturetech.org/product/wireless-module/ Features  1. More range

1 Piece HC-06 (Slave Mode only) Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU. HC-06 Module only supports slave mode. If you need Master & Slave mode check my other listing for HC-05 Bluetooth Module. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports only Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-06 Bluetooth (Slave Mode only) RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

1 Piece HC-06 (Slave Mode only) Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU. HC-06 Module only supports slave mode. If you need Master & Slave mode check my other listing for HC-05 Bluetooth Module. Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports only Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-06 Bluetooth (Slave Mode only) RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports Master & Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports Master & Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Cheapest Wireless Solution for upto 100 Meter* With Inbuilt antenna. When Tx rate is Set 250 Kbps, Range is Really Good. Good for Home Wireless Automation Projects. If you are looking for Long Range ( Meter) NRF Module Click   HERE We have Ready Library to use with AVR / PIC Microcontroller. After you Purchase Please let us know via Message. ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket   from us. Which includes everything you want to start with your NRF24L01+ RF Communication. Features: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm. Powered by Turbo Lister

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

WELCOME TO ROBOCENTRAL *** HC-06 Bluetooth RF Transceiver Module *** !!   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***DESCRIPTION*** This is a bluetooth module for use with any microcontroller.  It uses the UART protocol to make it easy to send and receive data wirelessly.  The HC-06 module is a slave only device.  This means that it can connect to most phones and computers with bluetooth.   !!!  SPECIFICATIONS  !!! A breakout board for easier connectivity Designed for 3.3v level ttl but will accept 5v level as well Built

MFRC-522 RC522 RFID RF IC card sensor module to send S50 Fudan card, keychain for arduino Package include: RFID-RC522 module one; the standard S50 blank card one; S50 shaped cards one (as shown keychain shape); Product details: MF RC522 is applied to MHz contactless communication highly integrated chip card reader, is NXP for the “Three Tables” application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated

MFRC-522 RC522 RFID RF IC card sensor module to send S50 Fudan card, keychain for arduino RFID-RC522 module one; the standard S50 blank card one; S50 shaped cards one (as shown keychain shape); vertical, curved row of pins each one; RC522 chip: MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the “Three Tables” application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

Elementskart Product Features 433 MHz RF ASK Transmitter and Receiver Modules For Long Distance Data Transfer Applications Product Specifications; RF ASK Transmitter Frequency Range: MHz Supply Voltage: 3V ~ 12V OutPut Power: 4 ~ 12 dBm Standard Operating Voltage: 5V RF ASK Receiver Receiver Frequency: MHz Typical Sensitivity: 105 dBm Supply Voltage: 3V ~ 12V Supply Current: 3.5 mA Standard Operating Voltage: 5V   Applications Remote Controls Automation System Wireless Security System Sensor Reporting Car Security System Remote Keyless Entry Supports All Wireless Applications using /AVR/PIC/ARM Microcontrollers (Using HT12E - HT12D Pair) For any queries Contact Us Elementskart No:1/27, Ground floor, Rathinapuri, Koyambedu, Chennai-106, Tamil Nadu. Mobile: Landline:

Product Features 433 MHz RF ASK Transmitter and Receiver Modules For Long Distance Data Transfer Applications Product Specifications; RF ASK Transmitter Frequency Range: MHz Supply Voltage: 3V ~ 12V OutPut Power: 4 ~ 12 dBm Standard Operating Voltage: 5V RF ASK Receiver Receiver Frequency: MHz Typical Sensitivity: 105 dBm Supply Voltage: 3V ~ 12V Supply Current: 3.5 mA Standard Operating Voltage: 5V   Applications Remote Controls Automation System Wireless Security System Sensor Reporting Car Security System Remote Keyless Entry Supports All Wireless Applications using /AVR/PIC/ARM Microcontrollers (Using HT12E - HT12D Pair)

ESP serial Wi-Fi UART wireless IOT module 3.3V AP+STA   For RasPi, arduino, AVR, other MCU ESP serial wifi Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description esp serial wifi:   ESP is a highly integrated chip designed for the needs of a new connected IoT world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Note:   This module requires a 3.3V supply for VCC, and 3.3V logic. It is not 5V tolerant. Connecting Rx or Tx on 5V Arduino may destroy this module. You must use a logic level converter, or a 3.3V Arduino. Also the 3.3V supply on the Arduino Uno has inadequate current capability to power this module. You must provide a separate, higher 3.3V supply (about 300mA or better)   Features ESP serial wifi: ·         SDIO 2.0, SPI, UART ·         Integrated RF switch, balun, 24dBm PA, DCXO, and PMU ·         Integrated RISC processor, on-chip memory and external memory interfaces ·         Integrated MAC/baseband processors ·         Quality of Service management ·         I2S interface for high fidelity audio applications ·         On-chip low-dropout linear regulators for all internal supplies ·         Proprietary spurious-free clock generation architecture ·         Integrated WEP, TKIP, AES, and WAPI engines   Specification ESPEX: ·             b/g/n ·             Wi-Fi Direct (P2P), soft-AP ·             Integrated TCP/IP protocol stack ·             Integrated TR switch, balun, LNA, power amplifier and matching network ·             Integrated PLLs, regulators, DCXO and power management units ·             +19.5dBm output power

WELCOME TO ROBOCENTRAL***    ***IMPORTED DC- DC Buck Converter ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***DESCRIPTION*** This is only the 315MHz transmitter. This will work with the RF Links at 315MHz at either baud rate. Only one 315MHz transmitter will work within the same location.This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range

Description This is only the 315MHz transmitter. This will work with the RF Links at 315MHz at either baud rate. Only one 315MHz transmitter will work within the same location.This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range

DESCRIPTION ABOUT This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. FEATURES AND USAGE This is the XBee WiFi Module with wire antenna from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of , the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee WiFi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other. As a member of the XBee family, the XBee WiFi combines hardware with software for a complete modular solution. XBee WiFi modules are designed to communicate with access points in existing infrastructures. Developers can use AT and API commands for advanced configuration options. SPECIFICATIONS 3.3V @ 40mA 250kbps Max data rate 2mW output (+3dBm) 400ft (120m) range Built-in antenna Fully FCC certified 6 10-bit ADC input pins 8 digital IO pins 128-bit encryption Local or over-air configuration AT or API command set Application Ideas: Remote controlled Boe-Bot robot Wireless data acquisition Remote signal beacon for adventure seekers Remote industrial monitoring Lighting control Keyless entry INCLUSIONS 1 x XBEE WIRELESS COMMUNICATION MODULE (WIRE ANTENNA) We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one