Transceiver wireless

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

The aim of this project is to develop a system for wireless message communication between two computers using 2.4 GHz trans-receiver units. In offices, communication between employees is essential. This project uses a pair of 2.4 GHz transceiver modules duly powered by 5 volt DC and alarm circuits. They are used for bidirectional real time chat communication from one PC to another wirelessly using hyper terminal. While one of the user attempts to initiate a chat, intimation upon that message is received first by a buzzer sound. There after the other user can start communicating over the chat mode from his PC. A pair of transceiver modules are connected to the PCs using a DB9 (De-Sub) connector and through serial data cord using RS232 protocol communication between the module and the PC. An on-board dedicated ac to dc power supply is used at both ends to power the units. This concept

WELCOME TO ROBOCENTRAL *** HC-06 Bluetooth RF Transceiver Module *** !!   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***DESCRIPTION*** This is a bluetooth module for use with any microcontroller.  It uses the UART protocol to make it easy to send and receive data wirelessly.  The HC-06 module is a slave only device.  This means that it can connect to most phones and computers with bluetooth.   !!!  SPECIFICATIONS  !!! A breakout board for easier connectivity Designed for 3.3v level ttl but will accept 5v level as well Built

ESP ESP-12 Remote Serial Port WIFI Transceiver Wireless Module for arduino Description: It run LWIP bgn WIFI Direct (P2P),SOFT-AP Built-in TCP/IP The AT command is perfect,efficient,concise Support three modes: AP, STA and AP+STA coexistence mode Package Includes: 1 x ESP-12 Remote Serial Port WIFI Transceiver Wireless Module Shipping:Power Ship/Dtdc/Speed Post

Description: It run LWIP bgn WIFI Direct (P2P),SOFT-AP Built-in TCP/IP The AT command is perfect,efficient,concise Support three modes: AP, STA and AP+STA coexistence mode Package included: 1 x ESP-12 Remote Serial Port WIFI Transceiver Wireless Module Powered by Turbo Lister

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one

It's HC-06 bluetooth module it acts only as slave. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

NRF 2.4Ghz NRF24L01+PA+LNA SMA Antenna Wireless Transceiver Module for Arduino Description: This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system. This nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier) Specification: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Package Includes: 1 x NRF24L01+PA+LNA Wireless Transceiver Module 1 x SMA Antenna Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket. Which includes everything you want to start with your NRF24L01+ RF Communication. Package Contains: 1 x NRF24L01+PA+LNA 1 x Long Range SMA connector Antenna For Any Technical Clarification. Please Click on Ask Seller ? We are Here to Help you. Any Questions Answered

Features: This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier) Specification: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Package included: 1 x  NRF24L01+PA+LNA Module 1 x  SMA Antenna

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

See our ratings Add this shop to my favorites ESP ESP-12 Serial WiFi Wireless Transceiver SMD Module with ADC and Extra Pinouts ₹ Availability:

See our ratings Add this shop to my favorites Nordic nRF24L01+ Compatible 2.4 GHz Wireless Transceiver M73   Availability:

See our ratings Add this shop to my favorites Nordic nRF24L01+ Compatible 2.4 GHz Wireless Transceiver M Availability:

ESP ESP-12E Serial WiFi Wireless Transceiver SMD Module with ADC, SPI and Extra Pinouts ESPE is an enhanced version ESP, improve peripheral circuitry increases impedance matching, the signal output is better, whether it is stable or anti-jamming capability, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added six IO ports on the basis of the ESP-12, SPI leads. ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Features: SDIO 2.0, SPI, UART 32-pin QFN package Integrated RF switch, balun, 24dBm PA, DCXO, and PMU Integrated RISC processor, on-chip memory and external memory interfaces Integrated MAC/baseband processors Quality of Service management I2S interface for high fidelity audio applications On-chip low-dropout linear regulators for all internal supplies Proprietary spurious-free clock generation architecture Integrated WEP, TKIP, AES, and WAPI engines Solutions: Supports APSD for optimal VoIP applications Patented spurious noise cancellation algorithm for integration

Description Package Includes: 1 Piece new  ESP Serial WIFI Wireless Transceiver Module Send Receive AP+STA for Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  ESP8266 Serial WIFI Wireless Transceiver Module Send Receive AP+STA for Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

USB 2.4Ghz Snap-in Transceiver Optical Foldable Folding Arc Wireless Mouse for Computer PC Laptop Ite m spec:                                                                                                                          2.4GHz Wireless Folding Mouse Here are five colors (Black, Red,light Blue,grey,light pink) for your choice, pls choose your preferred.   Wireless Technology: 2.4 GHz Key Life: Over Times Powered By:  2 x AAA Batteries (Not Included) Compatible With: All Windows Great for notebook and PC users Wireless Mouse has a sleek and stylish design that looks great on any desktop

ESP Wifi Module Serial Wireless Send Receive Transceiver ESP-12 Description: Chip: ESP Type: ESP-12 Package Included: 1 X ESP-12

ESP Wifi Module Serial Wireless Send Receive Transceiver ESP-12 Description: Chip: ESP Type: ESP-12 Package Included: 1 X ESP-12 Shipping:: We normally ship within 2-3 business days through Bluedart, Aramex, DTDC or Speed post (for remote locations).

One Stop Shop” for all your Dream Products!!!   "Quality Shop"  to Suit Everyone's Taste   WE ARE PROUD TO SAY THIS,WE ARE ENTERING THE TWELFTH YEAR IN E-COMMERCE BUSINESS     WE THANK OUR CUSTOMERS FOR GIVING FULL SUPPORT AND ENCOURAGEMENT. WE HOPE THAT, SURE WE WILL GET THE SAME IN THE FUTURE ALSO.... CONTACT AT    or email us   at    dealk @gmail.com Brand New Microsoft Wireless Desktop 800 Keyboard & Mouse Combo 2 Years Manufacturer Warranty OVERVIEW: Wireless Desktop 800 Product Dimensions Wireless Freedom at an Affordable Price Experience the freedom and convenience of wireless technology with this affordable keyboard and mouse set. Control a media computer while sitting on your sofa, or conveniently stow the keyboard and mouse away without hassling with wires. You can roam up to 30 feet away with a strong signal. Or, you can take the mouse separately to use with a laptop while travelling — the tiny transceiver conveniently snaps into the bottom of the mouse when it’s time to pack up and go. Setting up the keyboard and mouse is simple: just insert the batteries, plug

DESCRIPTION OF  MICROSOFT WIRELESS MOUSE (BLACK) Enjoy smooth navigation and operation with Wireless Mobile Mouse Mac/Win USB Port from Microsoft. Thanks to the Microsoft BlueTrack Technology, you can use the mouse on almost any surface. You can keep the  tiny transceiver plugged into the USB port  or  tuck it into the bottom of the mouse  while travelling. WARRANTY OF MICROSOFT WIRELESS MOUSE (BLACK) Warranty Period 3 Years Manufacturer Warranty

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

Description: ESP-01 ESP- is an ideal choice for hobbyist to start experimenting with IOT. The dimension of this module is 25mm x 15mm, with simple pin connections (standard 2×4 pin headers), using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the WiFi module. ESP ESP-01 Serial WIFI Transceiver Module is a cheap and easy way to connect to internet via WIFI to any microcontroller platforms like Arduino. You can use AT commands to connect to WiFi networks and open TCP/IP connections (without need to have TCP/IP stack running

Microsoft Arc Touch Wireless Mouse THREE YEARS MICROSOFT INDIA MANUFACTURER WARRANTY !!! OFFER PRICE Rs !!! DESCRIPTION: Perfectly poartable and award wininng Touch technology Curve to use and flatten to storage precise vertical scrolling by feel, not by wheel Blue Track technology Perfectly portable - and award-winning - Touch technology Stylish and eye-grabbing, Arc Touch Mouse is more than a pretty device. It's reliable wireless freedom plus Microsoft touch technology, on the go. Use it just about anywhere, even on a rough wood surface or carpet, thanks to BlueTrack Technology1. Plus you can retain wireless control of your computer up to 9 metres/30 feet away. Curve it for use, flatten for storage Arc Touch Mouse's innovative design allows for quick use and storage. Curve it comfortably to get started. Then smoothly glide your finger up or down the scroll pad. When you've finished, keep the tiny transceiver plugged into your computer's USB port, or attach it magnetically onto the underside of the mouse. Then flatten Arc Touch Mouse to turn it off, and slip it into your pocket or bag as easily as a mobile phone. Microsoft Arc Touch Mouse - The mouse that fits

Cheapest Wireless Solution for upto 100 Meter* With Inbuilt antenna. When Tx rate is Set 250 Kbps, Range is Really Good. Good for Home Wireless Automation Projects. If you are looking for Long Range ( Meter) NRF Module Click   HERE We have Ready Library to use with AVR / PIC Microcontroller. After you Purchase Please let us know via Message. ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket   from us. Which includes everything you want to start with your NRF24L01+ RF Communication. Features: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm. Powered by Turbo Lister