Uno clone

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software No need to install any additional driver

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

The product is a brand new Arduino UNO R3 Clone. It has guilded pins for your use. Works on 5v USB or 6-12v dc power supply. Check http://arduino.cc/en/main/arduinoBoardUno for more details. Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g

1 x UNO R3 MEGA328P ATMEGA16U2 board                       +  1 x USB cable  + 1 Plastic Carry Box  Product Description: 100% Brand New,  It is based on  MEGA328P Chip with 16U2 (UNO R3) feature,high quality clone. ATMEGA16U2 MEGA328P  UNO R3 Color of USB Cable: blue Transparent Plastic Carry Box   Package Include: 1 x UNO R3 MEGA328P ATMEGA16U2 board +  1 x USB cable + 1 Plastic Carry Box   Performance description: Digital I/O Digital input/output terminal, a total of 0 ~ 13. Analog I/O Analog input/output terminal, a total of 0 ~ 5. Support the ISP download function. The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ 9 v dc voltage input. Output voltage: 5 V dc voltage output and 3.3 V dc voltage output. Using Atmel Atmega328 microprocessor controller. Payment Options:   Payment by PaisaPay only, Safest payment mode on .  Terms and Conditions: Orders are expected to be shipped within 2 days of receiving cleared payment  excluding holidays.. Shipping details will be emailed to you after the item is shipped and then you can track your order. No Address change entertained once the order is placed. Please refuse to accept the package from courier if its

Arduino uno r3 development board with ATmega328p CH340G Arduino clone based on current open source hardware Arduino uno Atmega 328p smd ideal for prototyping Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Summary arduino uno: ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB of which 0.5 KB used by bootloader SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz         Features of arduino uno: ·         Replaced the expensive 16u2 with CH340G chip to avoid the driver compatibility problem which was found on some win7/win8 OSes. ·         Increased the extra pin holes to facilitate the use of DuPont line cables, with some extra useful pins. ·         Extra 3x4 pin holes, next to ICSP connector, which includes Tx, Rx, 5v, 3.3v, ground, SDA and SCL.    ·         All the rest features are kept the same as the official version   Driver installation and usage procedure: · Install   CH340G driver  . ·     Install   Arduino IDE   ß   (click here) ·     Connect the board to computer. ·     Launch Arduino IDE, select board as “arduino uno” ·     Select the com port OS created for the card(control panel   à   device manager) ·     Open basics   à   blink sketch and upload. ·     If you find any difficulty you can contact us, contact details are given below.   Factory Testing Procedure for arduino uno Atmega328p: We will make sure that we have tested the product with following procedure before shipment ·   We have uploaded blink program with 2 second blinking rate of LED ‘L’ instead of 1second default rate. ·   You can check it at the time of receipt of the product. Just connect it to the USB port of any device and the ‘L’ LED will blink at the rate of 2 second.   Package Include arduino uno: ·   1 x   arduino uno development board ·   1 x   USB cable ·   A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Very Good Condition But Power Jack Not Working No Problem But You Can Use With USB Adapter/Charger Very Good Condition With USB Cable ATMEL ATmega328P ATmega16U2 with USB Cable for ARDUINO UNO R3(Clone Version)

Product Description This can 2nd version of the customized arduino-compatible UNO R3 board, fully compatible with the arduino official version, but replaced some expensive parts and more extra pins lead out. Cost down but maybe better performance. Main customized features: Replace the expensive 16u2 USB-TTL IC to CH340 IC, cost nearly half, and can avoid the 16u2 driver compatibility problem which found on some win7/win8 OS. Replace the main IC atmega 328 PTH to atmega SMD QFP with arduino uno bootloader. Reserved extra male pins holes, so both female and male pins available on board, with some extra useful pins. Reserved another 3×4 pin holes, next to ISCP, pins includes: TX, RX, VCC, GND, IIC-SCL, IIC-SDA, power pins All the rest features are kept the same as the official version. Documentation: CH340 Driver can find on this page. Powered by Turbo Lister

Package Contains 1XArduino Uno R3 1X Usb Cable for Arduino The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

New New MultiDuino (Arduino Clone) Interface Board (On ATMEGA328 UNO Bootloader)  Inhouse Product Ideal for Fast Development and for those who are conducting Workshops and Developing & Testing Arduino Based Products ** Free 10 Pcs Female to Male Jumper Cables ** Multiduino-Freedom USB on Atmega328 comes with enhanced features (each port having box header) and is fully compatible with following Boards below (Not Included) with via FRC cable (Based on Arduino) 16x2 LCD Display Board 4X4 Keypad 8 LED Array Module L293D Dual H-Bridge Motor Driver Board L298N Dual H-Bridge Motor Driver Board Download Manual from Here Multidunio-Freedom_Manual.pdf Download Drivers from Here DriverInstaller_v1.7.0.zip Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*      * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

1 Piece Arduino UNO R3 Compatible (Clone) Board - ATmega328P CH340 microUSB (No USB Cable) You can use any mobile data cable to connect it to computer. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details This device and other listings with words 'Compatible' and 'Developement'

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver