Usb download

USB Download Programmer Emulator Debugger For AVR JTAG ICE Atmega AVR STUDIO Description Features:  Wide operating voltage,  support 3.3V, Plus a 0.5A PTC FUSE,  This simulation software is compatible upwards and downwards,  Software Support AVR ATUDIO latest   Compatible micro-controllers: ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L.  This emulator is a connected USB port,

USB Download Programmer Emulator Debugger For AVR JTAG ICE Atmega AVR STUDIO Description Features:  Wide operating voltage,  support 3.3V, Plus a 0.5A PTC FUSE,  This simulation software is compatible upwards and downwards,  Software Support AVR ATUDIO latest 4.12/4.14/4.16/4.17/4.18  Compatible micro-controllers: ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L.  This emulator is a connected USB port,

Product Description CH340 module / USB switch TTL / USB transfer RS232 / exceed PL / STC Downloader / 9 Brush board STC official download chip. Perfectly compatible with all Series MCU STC will not be because of the different drivers that would lead to problems like PL can not download the program. Ultra-stable.      1, new original CH340G chips, the chips are STC official recommended USB to TTL chips will not appear due to different drive / different computer as a result of incompatibilities! ! !    2, high-quality high-grade yellow pin, pin durable than the black market, beautiful;    3, not only has the power light PWR, there TXD and RXD LEDs, whether the product is easy to learn and intuitive to work

USBtinyISP AVR ISP programmer for Arduin bootloader Product Description USBtinyISP is designed for AVR,based on USB connector's ISP download wire. Officially supported by Arduino IDE, we can burn Arduino bootloader onto chips, and practically program any Atmel AVR microcontroller by this powerful AVR ISP programmer. * Both 6-pin and 10-pin AVR-standard interfaces * 2 LEDs to indicate "USB/Power good" and "Busy" * USB powered         Steps to burn Arduino bootloader: 1. Download driver(http://blog.arduino.cn/wp-content/uploads//usbtinyisp-w32-driver-v112.zip), unzip and install 2. When you see “USBtinyISP AVR Programmer”

Super Speed Up To 4.8 Gbps USB 3.0 Desktop Front Header for your USB 3.0 Expansion Card / Motherboard Onboard 20 Pin connector + Full Speed Up To 480Mbps USB 2.0 Desktop Front Header for your Existing USB 2.0 Motherboard Onboard 10 Pin connector  ---  Original Price Rs INR ________________________________________________________________________________________________________________________________________________ FEATURES: 100% brand new and high quality Imported Product. Quantity: 1 Piece. USB 3.0 + USB 2.0 interface. Super speed data transfer up to 4.8 Gbps on USB 3.0 Ports. Full Speed data transfer up to 480 Mbps on USB 2.0 Ports. Fast transfer rate for reliable copy/download/backup. Universal Plug N Play: No additional driver installation required. Powers via IDE 4-Pin Power cable, better for Power hungry External Hard Drives. USB 3.0 Backward Compatible USB2.0 and USB 1.1 Card Compatibility: SDHC/SD, Micro SD, TF via USB interface. Compatible OS: Windows ME,,XP,Vista,WIN 7 WIN 8 and Mac OS with USB 20-Pin Header. Tiny Form Factor, easy to install. Perfect fit for Floppy Bay DESCRIPTION: This is a USB 3.0 & USB 2.0 Front Header Connector / Port Extender for your pre-installed USB 3.0 Expansion Card OR Motherboard On board USB 3.0 expansion 20-Pin Header; and also for USB 2.0 Front Header Connector. This is a simple Header which doesn't require any Hi-Fi technical knowledge for installation. No additional Drivers needs to be installed

Super Speed Up To 4.8 Gbps USB 3.0 Desktop Front Header for your USB 3.0 Expansion Card / Motherboard Onboard 20 Pin connector At 45 % Discount  ---  Original Price Rs INR ________________________________________________________________________________________________________________________________________________ FEATURES: 100% brand new and high quality Imported Product. Quantity: 1 Piece. USB 3.0 interface. Almost half the rate from competitors like Ankel High speed data transfer up to 4.8 Gbps. Fast transfer rate for reliable copy/download/backup. Universal Plug N Play: No additional driver installation required. Powers via USB port, no additional power supply needed. USB 3.0 Backward Compatible USB2.0 and USB 1.1 Card Compatibility: SDHC/SD, Micro SD, TF. Compatible OS: Windows ME,,XP,Vista,WIN 7 WIN 8 and Mac OS with USB 20-Pin Header. Tiny Form Factor, easy to install. DESCRIPTION: This is a USB 3.0 Front Header Connector / Port Extender for your pre-installed USB 3.0 Expansion Card OR Motherboard On board USB 3.0 expansion 20-Pin Header. This is a simple Header which doesn't require any Hi-Fi technical knowledge for installation. No additional Drivers needs to be installed

MYSELF CHANDER FROM KARNAL AND I AM RUNNING A SMALL GAME PARLOUR.AND HAVE A BIT KNOWLEDGE OF THESE GAMES ALSO WITH PS2,PS3,XBOX 360 AND ALL PC GAMES AND I DEALS IN ALL THESE GAMES ON I WILL TRY TO SATISFY EACH OF MY BUYERS ON  IN GAMES AS WELL AS ACCESORIES   I ASSURE YOU THAT I WILL SHIP YOUR ITEM WITH IN 6 HOURS PLEASE GIVE ME A TRY.JUST ONE TRY.......   I ASSURE YOU THAT I WILL NOT BREAK YOUR CONFIDENCE IN MY SHOP. MY CONTACT NUMBER IS MY EMAIL ID IS  USB serial RS232 adapter  in ultra compact mini size for laptop and desktop computer users converts a USB port into a 9-pin male RS-232 serial port which is capable of speeds up to bps.  USB serial RS232 adapter  makes serial port expansion quick and simple. Connecting to a USB port on the computer, the USB COM instantly adds a serial communication port to your system. By taking advantage of the USB bus, this product makes it easier than ever to add serial ports and serial devices to your system with easy plug-and-play and hot plug features.  Plugging the USB COM into the USB port, the adapter is automatically detected. There are no IRQ & COM port conflicts since the port doesn't require any additional IRQ, DMA, or memory as resources on the system. The USB-COM-S provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a high speed serial communications port. Features 1 USB pecification 2.0 compliant 2 Supports RS232 serial interface DB9 3 Supports over 1 Mbps data transfer rata 4 Supports remote wake-up and power management 5 Available for USB port 6 Suppots Win/XP/Vista/7 Mac os v8.6 or higher Unit dimensions: mm Package dimensions: mm Unit net weight: 21 gram Unit gross weight: 56 gram Interface:  USB A male     User manual of ZX-U03-2A (ZX-U03-2A-user-manual.jpg, 58 Kb) [Download] PACKAGE INCLUDES: ITEM AS DESCRIBED ABOVE  MINI DISK SHORT USB EXT CABLE                          PAYMENT WILL BE VIA PAISAPAY AS IT IS THE BEST OPTION AS WELL AS SAFETY FOR BOTH BUYERS AS WELL AS SELLERS                   SHIPPING WILL BE VIA DTDC COURIER.   IF ANY ITEM HAS MANUFACTURER WARRANTY AND THE ITEM GOES DEFECTIVE PLEASE DONT MIND THE WARRANTY WILL BE GIVEN BY RESPECTED COMPANY ONLY.BECAQUSE THEY ARE RESPONSIBLE FOR IT. IF ANY ITEM HAS SELLER WARRANTY I.E BY ME THEN WARRANTY RESPONSIBILITY IS MINE. REFUND WILL NOT BE GIVEN IF THE ITEM SHOWS IMPROPER USE IF YOUR AREA  IS NOT REACHABLE  UNDER DTDC THEN PLEASE DONT MIND IT,WE CANT SHIP THE ITEM TO YOUR LOCATION BECAUSE DTDC IS THE ONLY COURIER WHOSE PRICES ARE REASONABLE WITH THE ITEM PRICE IF YOUR AREA IS NOT REACHABLE UNDER DTDC COURIER THEN NEGATIVE COMMENT REGARDING IT WILL NOT BE ALLOWED                             

       MYSELF CHANDER FROM KARNAL AND I AM RUNNING A SMALL GAME PARLOUR.AND HAVE A BIT KNOWLEDGE OF THESE GAMES ALSO WITH PS2,PS3,XBOX 360 AND ALL PC GAMES AND I DEALS IN ALL THESE GAMES ON I WILL TRY TO SATISFY EACH OF MY BUYERS ON  IN GAMES AS WELL AS ACCESORIES   I ASSURE YOU THAT I WILL SHIP YOUR ITEM WITH IN 6 HOURS PLEASE GIVE ME A TRY.JUST ONE TRY.......   I ASSURE YOU THAT I WILL NOT BREAK YOUR CONFIDENCE IN MY SHOP. MY CONTACT NUMBER IS 01844036743 MY EMAIL ID IS  customerisgodalways@gmail.com USB serial RS232 adapter  in ultra compact mini size for laptop and desktop computer users converts a USB port into a 9-pin male RS-232 serial port which is capable of speeds up to 921,600 bps.  USB serial RS232 adapter  makes serial port expansion quick and simple. Connecting to a USB port on the computer, the USB COM instantly adds a serial communication port to your system. By taking advantage of the USB bus, this product makes it easier than ever to add serial ports and serial devices to your system with easy plug-and-play and hot plug features.  Plugging the USB COM into the USB port, the adapter is automatically detected. There are no IRQ & COM port conflicts since the port doesn't require any additional IRQ, DMA, or memory as resources on the system. The USB-COM-S provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a high speed serial communications port. Features 1 USB pecification 2.0 compliant 2 Supports RS232 serial interface DB9 3 Supports over 1 Mbps data transfer rata 4 Supports remote wake-up and power management 5 Available for USB port 6 Suppots Win98/2000/XP/Vista/7 Mac os v8.6 or higher Unit dimensions: 60*35*12 mm Package dimensions: 150*100*20 mm Unit net weight: 21 gram Unit gross weight: 56 gram Interface:  USB A male     User manual of ZX-U03-2A (ZX-U03-2A-user-manual.jpg, 58 Kb) [Download] PACKAGE INCLUDES: ITEM AS DESCRIBED ABOVE  MINI DISK SHORT USB EXT CABLE                          PAYMENT WILL BE VIA PAISAPAY AS IT IS THE BEST OPTION AS WELL AS SAFETY FOR BOTH BUYERS AS WELL AS SELLERS                   SHIPPING WILL BE VIA DTDC COURIER.   IF ANY ITEM HAS MANUFACTURER WARRANTY AND THE ITEM GOES DEFECTIVE PLEASE DONT MIND THE WARRANTY WILL BE GIVEN BY RESPECTED COMPANY ONLY.BECAQUSE THEY ARE RESPONSIBLE FOR IT. IF ANY ITEM HAS SELLER WARRANTY I.E BY ME THEN WARRANTY RESPONSIBILITY IS MINE. REFUND WILL NOT BE GIVEN IF THE ITEM SHOWS IMPROPER USE IF YOUR AREA  IS NOT REACHABLE  UNDER DTDC THEN PLEASE DONT MIND IT,WE CANT SHIP THE ITEM TO YOUR LOCATION BECAUSE DTDC IS THE ONLY COURIER WHOSE PRICES ARE REASONABLE WITH THE ITEM PRICE IF YOUR AREA IS NOT REACHABLE UNDER DTDC COURIER THEN NEGATIVE COMMENT REGARDING IT WILL NOT BE ALLOWED                             

Description ·          USB JTAG uses FTd dual channel USB chip ·          Channel A is configured as Asynchronous serial UART that is capable of speeds up to 2MHz. ·          Channel B is connected to the JTAG pins which provide very fast programming. Features ·          High Speed FPGA programming compared to Standart Xilinx USB JTAG Programmer ·          Support.bit,.mcs,.jde ·          Compatible with all Spartan series and Virtex Series FPGA ·          Also Compatible with Xilinx CPLD ·          Works only with custom software ·          Channel 1 as UART Configuration ·          Channel 2 as JTAG Configuration ·          Note:   It doesn’t work with Impact Software. After generating bit file, open software provided with programmer and download bit file. Kit Includes ·          USB JATG Programmer ·          Micro USB Cable ·          14-pin Ribben Cable

PLHK USB to TTL Rs232 Description • Built-in TTL COM PC-PLHX Chip  • Standard USB type A male and TTL 4 pin connector  • Cable length: mm ( in)  • Simple and Easy way to give USB support to your designs  • Available for Linux, Mac, WinCE and Windows (XP, ), Vista, Win 7，  • NOT WINDOWS 8 compatible  • Black cable-----GND  • Green cable----TXD  • White cable----RXD  • Red cable ---- VCC (5V)  PL Windows Driver Download Driver PLUSBtoTTL Serial Debugger Module Use 1, install the driver, 2, restart the computer, 3, the module is plugged into the computer's USB port, the system will automatically install the driver 4, the TXD and RXD connected (that is, one with a Dupont line inserted

Mini 150Mbps USB WiFi Wireless Adapter Network LAN Card n/g/b 100% Brand-MAXPRO,  Quality Assurance!! Cheapest On One Year Warranty   Features: Complies with IEEE n IEEE g, IEEE b standards 1x1/1x2 modes STBC Support for Extended Range Legacy and High Throughput Modes 20MHz/40MHz bandwidth Reverse Direction Data Flow and Frame Aggregation WEP , WPA, WPA2 Support Multiple BSSID Support Provides USB 2.0 Hi-Speed interface for Cisco CCX V1.0 V2.0 V3.0 Compliance Low Power with Advanced Power Management Works with Windows 7,Windows XP,Windows Vista and Windows , Linux,  Specification: Standard: IEEE g, IEEE b, CSMA/CA with ACK Interface: USB2.0 Frequency Range:2.4GHz-GHz Radio Data Rate: 11N:(adaptive) 11G: (adaptive) 11b: M (adaptive) Channel: 1~11 (US, Canada); 1~13 (Europe); 1~14 (Japan) Spread Spectrum: DSSS Modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM) Transmission Distance:  Indoor up to 100m, outdoor up to 300m (it is limited to environmental factors) Transmit Power: 15dBm Antenna plus: 2X2dBi LED Indicator: Status Data Security: WPA; -bit WEP; TKIP/AES Environment: Operating Temperature: 0C~) Operating Humidity: % non-condensing Original box: NO Net weight: 1.8g Color: black WARRANTY: 1YEAR KEEP THE PRINTED BILL WITH YOU. WHICH COMES WITH PACKAGE FOR WARRANTY. WITHOUT BILL WE WILL NOT ABLE TO PROVIDE WARRANTY. TO GET REPLACED OR WARRANTY CUSTOMER HAS TO SEND THE PRODUCT TO US, AND SHIPPING EXPANSE HAS TO BARE BY CUSTOMER. WE WILL SEND FREE REPLACEMENT TO YOU MANY TIMES CD DONT WORK OR BREAK DURING DAMAGE IN COURIER. WE CAN EMAIL THE SOFT COPY OR YOU CAN DOWNLOAD DRIVER FROM OUR WEBSITE WWW.SHOPMAXPRO.COM

Description: 1.  CH340G REPLACE FT232RL 2.  Operating Voltage(logic level):5V 3.  8 analog inputs ports:A0 ~ A Digital input / output ports:TX,RX,D2 ~ D PWM ports:D3, D5, D6, D9, D10, D pairs of TTL level serial transceiver ports RX / TX 8.  Using Atmel Atmega328P-AU MCU 9.  Support USB download and Power 10. Support for external 5V ~ 12V DC power supply 11. Support power supply by 9V battery   Package include:  1pcs + 3 rows of pins

Arduino Nano V% New, Arduino-Compatible Board * Fully Compatible to Arduino Nano V3.0 ATmega328P-AU * ATmega328 Microcontroller * Bootloader installed, ready to upload sketches from Arduino software *  Support USB download and Power Features Microcontroller ATmega328 Operating Voltage (logic level) 5 V Input Voltage (recommended) 7-12 V Input Voltage (limits) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16  MHz

Description: 1.  CH340G REPLACE FT232RL 2.  Operating Voltage(logic level):5V 3.  8 analog inputs ports:A0 ~ A Digital input / output ports:TX,RX,D2 ~ D PWM ports:D3, D5, D6, D9, D10, D pairs of TTL level serial transceiver ports RX / TX 8.  Using Atmel Atmega328P-AU MCU 9.  Support USB download and Power 10. Support for external 5V ~ 12V DC power supply 11. Support power supply by 9V battery     8 analog inputs ports:A0 ~ A7     14 Digital input / output ports:TX,RX,D2 ~ D13     6 PWM ports:D3, D5, D6, D9, D10, D11     1 pairs of TTL level serial transceiver ports RX / TX   Package include: 1pcs + 3 rows of pins = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

PACKAGE INCLUDES: 2 PIECE NANO V3.0 Arduino Nano V% New, Arduino-Compatible Board * Fully Compatible to Arduino Nano V3.0 ATmega328P-AU * ATmega328 Microcontroller * Bootloader installed, ready to upload sketches from Arduino software *  Support USB download and Power Features Microcontroller ATmega328 Operating Voltage (logic level) 5 V Input Voltage (recommended) 7-12 V Input Voltage (limits) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16  MHz

USB FLASH DRIVE 16 GB Leather USB 16 GB Pen Drive Description Feature: 1. Capacity: 16GB 2. Operating Systems: Windows 8/7/Vista/XP//ME/ and Mac OS; 3. Transfer Rate: High Speed USB 2.0; 4. Data transfer speed: Reading Speed 12MB/s, Writing Speed 5MB/s; 5. Drivers: only Required for Windows . Online download available; 6. Data Retention: 10 years minimum; 7. Supports boot up by USB-HDD or USB-ZIP mode; 8. Plug-and-play; No external power supply required, USB bus powered. 9. Certification: CE, RoHS, FCC; 10. Warranty: 5 years warranty.  

Description: 100% brand new and high quality The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much. The Digispark is shipped fully assembled except for the two included and easy to solder headers. Here are the specs: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)On-board 500ma 5V Regulator Built-in USB6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI)PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Size:2x1.7cm(approx) Package Included: 1 x Digispark Kickstarter Attiny85 USB Development Board for Arduino Full Wiki link:  digispark Wiki         Software: NOTE:  If you used a version of the ide where the digistump add-ons were installed separately you must delete the digistump folder at My Documents/Arduino/hardware (windows) or Documents/Arduino/hardware (OS  X) or /home/[username]/Sketchbook (Linux) or this new IDE install will not work properly and you will get library errors! The Digispark uses the Arduino IDE - Digistump Release 1.5.x which is the Arduino IDE with some custom additions and supports Digispark, Digispark Pro, and DigiX. These are presented as a fully integrated package with 1.5.x that can be downloaded as an installed or zip file. First download the appropriate package: Windows (now with fully signed drivers!) Installer (recommended): https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpArduinoInstall1.5.8C.exe Zip:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C.zip Mac:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8COSX.zip Linux: 32-bit:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C-linux32.tar.gz 64-bit:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C-linux64.tar.gz Note: report any issues with the builds to the forum:  http://digistump.com/board Compiling from source:  https://github.com/digistump/DigistumpArduino Windows Install Complete these steps before plugging

iBall Airway 21.0 MP-58 3G USB Modem Data Card 21 Mbps Wi-Fi Ready   Fast Shipping Within 3 to 6 working days. 100% Satisfaction Guaranteed. With 1 Year Manufacturer Warranty. PLEASE SEE OUR 100% POSITIVE FEEDBACK AND BUY WITH CONFIDENCE Be sure to add me to your  favourites list !  Sign up for my email newsletters  by adding my Shop to your Favourites     Description iBall Airway 21.0 MP-58 3G Data Card iBall Airway 21.0MP-58  is designed to enable users with access to High Speed Internet via HSPA+ / UMTS / EDGE / GPRS Networks which offers a maximum data transfer rate download to 21Mbps & upload to 5.76Mbps. Vaulten 5GB Cloud Storage: - Cloud Service software bundled with iBall Airway data card - Free 5GB of Internet Cloud space  - Backup, Sync & Share your data, audio, video & much more..   iBall Hotspot: - Download the Soft AP application to create your own Hotspot (Wi-Fi) Zone. - Support for Win7/ Win8 os.   100 % UNLOCKED (Supports any network)   Key Features: Compatible with 2G/3G GSM Network High speed data transmit rate with Download up to 21Mbps & Upload 5.76Mbps Plug and Play Micro SD card slot - Max. up to 32GB support Voice Call SMS PhoneBook USSD Service Internal Antenna USB 2.0 interface OS Compatible: Winxp, Vista / Win7 / Win8 & MAC OS * (Intel Platform)   Specifications: Technical Standards: Data transmission up to 21Mbps (HSPA+) Data transmission up to 5.76Mbps (HSUPA) Data transmission up to 384kbps (UMTS) Data transmission up to 237kbps (EDGE) Data transmission up to 85.6kbps (GPRS)   Frequence Band: HSDPA / UMTS:  Mhz GSM /GPRS / EDGE: 850Mhz, 900Mhz, Mhz and Mhz   Power Class: WCDMA -  Power Class 3 GPRS   -  Power Class 4 EDGE -  Power Class E2   External Interface: UMTS/GSM Antenna -  Built-in Antenna USB Type -  Standard USB Interface USB Speed -  USB 2.0 High Speed SIM/USIM Card -  Standard 6 PIN SIM card interface, compliant with 3GPP and   General Features: Drivers: Zero-CD Automatic installation Languages Supported:  English PC Suite With Voice Call, SMS, Phone-Book & USSD Services   Hardware Requirements: Minimum C.P.U 500MHz (Intel Platform) 512MB RAM 40MB Free Disk Space Standard USB 2.0 port   Dimensions: 86(D) x 26 (W) x 9(H) mm   Led's: Colour Flashing Cycle -  Searching Network Red Slow Flashing -  Abnormal of (U)SIM card or no network Luminous continuously -  Data transmission Green Colour -  HSPA Blue Colour -  UMTS Purple Colour -  EDGE Yellow Colour -  GPRS   Operating Temperature: -10°c to 55°c   *Accessories Does Not Include Any SIM. The best way to contact us is through messages.

New iBall Airway 21.0 MP-58  2G 3G USB Modem Data Card 21 Mbps Dongle WiFi Ready iBall Airway 21.0MP-58  is designed to enable users with access to High Speed Internet via HSPA+ / UMTS / EDGE / GPRS Networks which offers a maximum data transfer rate download to 21Mbps & upload to 5.76Mbps.   Vaulten 5GB Cloud Storage:  - Cloud Service software bundled with iBall Airway data card - Free 5GB of Internet Cloud space  - Backup, Sync & Share your data, audio, video & much more.. iBall Hotspot: - Download the Soft AP application to create your own Hotspot (Wi-Fi) Zone. - Support for Win7 32-bit & 64-bit / Win8 32bit os. Compatible with 2G/3G GSM Network High speed data transmit rate with Download up to 21Mbps & Upload 5.76Mbps Plug and Play Micro SD card slot - Max. up to 32GB support Voice Call SMS PhoneBook USSD Service Internal Antenna USB 2.0 interface OS Compatible: Winxp, Vista / Win7 / Win8 & MAC OS * (Intel Platform) Technical Standards Data transmission up to 21Mbps (HSPA+) Data transmission up to 5.76Mbps (HSUPA) Data transmission up to 384kbps (UMTS) Data transmission up to 237kbps (EDGE) Data transmission up to 85.6kbps (GPRS) Frequency Band HSDPA / UMTS: Mhz GSM /GPRS / EDGE: 850Mhz, 900Mhz, Mhz and Mhz Power Class WCDMA - Power Class 3 GPRS  - Power Class 4 EDGE - Power Class E2 External Interface UMTS/GSM Antenna - Built-in Antenna USB Type - Standard USB Interface USB Speed - USB 2.0 High Speed SIM/USIM Card - Standard 6 PIN SIM card interface, compliant with 3GPP and General Features Drivers: Zero-CD Automatic installation Languages Supported: English PC Suite With Voice Call, SMS, Phone-Book & USSD Services Hardware Requirements Minimum C.P.U 500MHz (Intel Platform) 512MB RAM 40MB Free Disk Space Standard USB 2.0 port Dimensions 86(D) x 26 (W) x 9(H) mm Led's Colour Flashing Cycle - Searching Network Red Slow Flashing - Abnormal of (U)SIM card or no network Luminous continuously - Data transmission Green Colour - HSPA Blue Colour - UMTS Purple Colour - EDGE Yellow Colour - GPRS Operating Temperature -10°c to 55°c Payment Policy

Product Description 1x FT232RL USB TO TTL 5V 3.3V Download Cable To Serial Adapter Module For Arduino Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex FT232RL USB TO TTL 5V 3.3V Download Cable To Serial Adapter Module For Arduino Features: 100% Brand new and high quality Material: PCB + Electronic Component Support 3.3V, 5V Main Color: Red Chipset: FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch:2.54mm Module Size: About 36mm(length)*17.5mm(width) Interface: Mini USB Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

4 channel USB Relay Board with 36 Digital/Analog I/Os USB Data Acquisition Board    Welcome to the world of Computer Automation. This USB Relay Board - U96 is a perfect companion for all your computer automation projects. It is USB based card having 4 onboard relays for switching external devices and up to 36 digital & analogue I/Os that will help you to monitor various real world scenarios using switches & different kind of sensors to monitor many parameters like Temperature, Pressure, Light, Touch, PH etc. This card is not only good for controlling Relays but a perfect example for Data Acquisition applications. It appears as a USB CDC (Communications Device Class) device when connected to USB port of a computer. This creates a Virtual Serial (Com) Port, which allows easy communication with the card. Any programming language that supports serial communications (C, C#, C++, VB, VB.NET, Perl, Java etc) can be used to communicate with U96 very easily. Easy to use commands are available to communicate with U96 which handle various tasks like Switching On/Off of Relays, Controlling Digital Inputs & Outputs, Getting analog data etc. The controller provides 4 relay outputs to control various electrical devices. Apart from this, the card has up to 36 digital input & output pins. It has also got 15 Analog input pins. All pins will be individually configured as Digital Input or Digital output or Analog input automatically as per input command. Each Digital pin can support a TTL or Schmitt Trigger Input or a 3.3V output. Each Analog pin will convert analog voltage (Between 0 to 3V) or Higher (through voltage divider) into 12 bit resolution value. The output can be raw data or converted into voltage. The raw data be converted into required form using conversion formulas. Any kind of sensor whether it is providing digital output or analogue output can be interfaced with U96 and monitored with the help of computer. For more information please download U96 User Manual from our download section at http://iknowvations.in/downloads/. If you have any questions, you can contact our support team at support@iknowvations.in

The Freeduino is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Before connecting the Freeduino, CP Driver installation would be required.   Got to link below http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Or google CP driver download. ------------àSelect as per your Operating system and download the driver------------àUnzip the file on desktop ------------àConnect the UNO with USB Cable given to your computer------------àDevice Manager will display Unknown device for the UNO (CP IC). Right click on the same and click on update driver. Give path as desktop. Wait till driver is installed. ------------àYour CP Driver is installed and Uno is ready for use.

Product Description:   The Freeduino is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Before connecting the Freeduino, CP2102 Driver installation would be required. Got to link below http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Or google CP2102 driver download. ------------>Select as per your Operating system and download the driver------------>Unzip the file on desktop ------------>Connect the UNO with USB Cable given to your computer------------>Device Manager will display Unknown device for the UNO (CP2102 IC). Right click on the same and click on update driver. Give path as desktop. Wait till driver is installed.------------>Your CP2102 Driver is installed and Uno is ready for use.   Contact: Contact us on Messaging for any Queries. We offer discounts for bulk orders on   Feedback: We provide good quality products & all products are QC checked before dispatch. We strive for 100% positive feedback for our orders. Providing Negative feedback will not solve anything feel free to write to us on messaging service. Feel Free to contact us on +91 7738961235   Shipping: Shipping is done only through Powership. Logistics partners include – Bluedart DHL, Dotzot, Aramex, Fedex.  

PNY Turbo 128GB USB 3.0 Flash Drive - P-FD128TBOP-GE Flat 7% off Coupon HIKE01 to get this flash drive for Rs Transfer speeds approximately 10 times faster than standard PNY USB 2.0 Flash Drives Store and transfer large files faster than ever with USB 3.0 technology Allows for quick and easy transfer of all content The 128GB Turbo USB 3.0 Flash Drive can hold approximately songs Sliding collar, capless design with integrated loop makes it easy to attach to key chains, backpacks and etc. Backwards compatible with USB 2.0 ports, so you can utilize any USB 2.0 or USB 3.0 port; compatible with most PC and Mac laptop and desktop computers Free technical support Product Description Capacity:   128GB PNY 128GB USB 3.0 Flash Drive P-FD128TBOP-GE USB Flash Drives From the Manufacturer   PNY Turbo USB 3.0 Flash Drive Get the most out of the USB 3.0 port on your new laptop or desktop computer, and experience USB 3.0 next generation speed performance. The Turbo USB 3.0 Flash Drives have transfer speeds approx. 10X Faster than standard PNY USB 2.0 Flash Drives The PNY Turbo 3.0 USB Flash Drive is compatible with computers running Windows XP, Windows Vista, Windows 7, and Mac OS X v10.5 or later (software download required for Mac). Speeds quoted for USB 3.0 devices. Speeds are based on PNY standard USB MB/s) write speed. Performs at USB 2.0 speeds when used on 2.0 devices.   View larger Built for Speed & Convenience USB 3.0 Lets You Store & Transfer Content Faster To get all of the features of USB 3.0, you must connect a USB 3.0 device to a USB 3.0 port. You can use a USB 3.0 device on a USB 2.0 port, but the performance will be limited to USB 2.0 transfer speeds. Similarly, you can use a USB 2.0 device on a USB 3.0 port, but performance is limited to USB 2.0 transfer speeds. Designed for Reliable Portable Storage PNY's Turbo USB 3.0 Flash Drive is designed with convenience and portability

PNY Turbo 128GB USB 3.0 Flash Drive - P-FD128TBOP-GE Transfer speeds approximately 10 times faster than standard PNY USB 2.0 Flash Drives Store and transfer large files faster than ever with USB 3.0 technology Allows for quick and easy transfer of all content The 128GB Turbo USB 3.0 Flash Drive can hold approximately songs Sliding collar, capless design with integrated loop makes it easy to attach to key chains, backpacks and etc. Backwards compatible with USB 2.0 ports, so you can utilize any USB 2.0 or USB 3.0 port; compatible with most PC and Mac laptop and desktop computers Free technical support Product Description Capacity:   128GB PNY 128GB USB 3.0 Flash Drive P-FD128TBOP-GE USB Flash Drives From the Manufacturer   PNY Turbo USB 3.0 Flash Drive Get the most out of the USB 3.0 port on your new laptop or desktop computer, and experience USB 3.0 next generation speed performance. The Turbo USB 3.0 Flash Drives have transfer speeds approx. 10X Faster than standard PNY USB 2.0 Flash Drives The PNY Turbo 3.0 USB Flash Drive is compatible with computers running Windows XP, Windows Vista, Windows 7, and Mac OS X v10.5 or later (software download required for Mac). Speeds quoted for USB 3.0 devices. Speeds are based on PNY standard USB MB/s) write speed. Performs at USB 2.0 speeds when used on 2.0 devices.   View larger Built for Speed & Convenience USB 3.0 Lets You Store & Transfer Content Faster To get all of the features of USB 3.0, you must connect a USB 3.0 device to a USB 3.0 port. You can use a USB 3.0 device on a USB 2.0 port, but the performance will be limited to USB 2.0 transfer speeds. Similarly, you can use a USB 2.0 device on a USB 3.0 port, but performance is limited to USB 2.0 transfer speeds. Designed for Reliable Portable Storage PNY's Turbo USB 3.0 Flash Drive is designed with convenience and portability

PNY Turbo 128GB USB 3.0 Flash Drive - P-FD128TBOP-GE Transfer speeds approximately 10 times faster than standard PNY USB 2.0 Flash Drives Store and transfer large files faster than ever with USB 3.0 technology Allows for quick and easy transfer of all content The 128GB Turbo USB 3.0 Flash Drive can hold approximately songs Sliding collar, capless design with integrated loop makes it easy to attach to key chains, backpacks and etc. Backwards compatible with USB 2.0 ports, so you can utilize any USB 2.0 or USB 3.0 port; compatible with most PC and Mac laptop and desktop computers Free technical support From the Manufacturer   PNY Turbo USB 3.0 Flash Drive Get the most out of the USB 3.0 port on your new laptop or desktop computer, and experience USB 3.0 next generation speed performance. The Turbo USB 3.0 Flash Drives have transfer speeds approx. 10X Faster than standard PNY USB 2.0 Flash Drives The PNY Turbo 3.0 USB Flash Drive is compatible with computers running Windows XP, Windows Vista, Windows 7, and Mac OS X v10.5 or later (software download required for Mac). Speeds quoted for USB 3.0 devices. Speeds are based on PNY standard USB MB/s) write speed. Performs at USB 2.0 speeds when used on 2.0 devices. View larger Built for Speed & Convenience USB 3.0 Lets You Store & Transfer Content Faster To get all of the features of USB 3.0, you must connect a USB 3.0 device to a USB 3.0 port. You can use a USB 3.0 device on a USB 2.0 port, but the performance will be limited to USB 2.0 transfer speeds. Similarly, you can use a USB 2.0 device on a USB 3.0 port, but performance is limited to USB 2.0 transfer speeds. Designed for Reliable Portable Storage PNY's Turbo USB 3.0 Flash Drive is designed with convenience and portability

Product  description:   100% brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND (Some pins should be soldered) Pitch:2.54mm Module size:36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module. http://www.ftdichip.com/FTDrivers.htm How to download FTDI Driver: https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/all SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

New Micro USB OTG Cable - Attach Pendrive, Mouse, Keyboard To Mobiles &  USB 2.0 Micro USB OTG Cable white Portable design and easy to install Support High speed data rate up to 480Mbps Supports plug & play Connectors: USB 2.0 female, Micro-B male Compliant with USB2.0 standard and backward compliant with USB1.1 standard Converts your Micro USB OTG capable tablet computer or smartphone into a USB host for connecting USB accessories, enabling you to download pictures, transfer data, and work more efficiently. The USB port added by the adapter is situated approximately five inches away from your mobile digital device, offering more flexibility for connecting USB devices. Key Features Support for USB OTG (On-the-Go) capable devices 1 Micro USB 'B' male connector 1 USB 'A' female connector port Applications Add a standard USB port to your Micro USB OTG-capable tablet computer or Smartphone Connect a USB keyboard or mouse to your tablet Connect a thumb drive to your tablet, cell phone, or eReader for removable data storage Connect Your USB On-the-Go Capable Tablet Computer or Smartphone to USB 2.0 Devices (Thumb Drives, USB Mouse, Keyboard, mobile phones etc.) The UUSBOTG Micro USB On-The-Go (OTG) Adapter Cable features a Micro USB male (B-type) connector and a USB female (A-type) connector, delivering a simple way to convert your Micro USB OTG capable tablet computer or Smartphone into a USB On-the-go host, and enables you to connect a USB peripheral device such as a thumb drive, or USB mouse or keyboard, etc. This USB to Micro USB Host OTG cable is designed and constructed for maximum durability to ensure dependable, long-lasting connections. .

Bsnl EVDO modem online sales EVDO data card Call 0971O2O3O55. Speed Download 3.1mbps, Upload 1.9Mbps, and Type usb: Plug and play. OS Support Window Xp Win7 Win8 Linux. Unlimited 3G plan Fee-National Roaming, Unlimited download and upload no limit Free Home Delivery All Over India. All 3G/4G Modem/ Router/iPhone unlock done. Modem price Rs.900/ Order through our website: www.kalp.us

Other Items Feedbacks About Us Contact Us Add To Favorites CNB816-USB to Serial UART / TTL (3.3V/5V) Converter for Android Driver Solution PLHXD Android Driver Solution    Prolific provides Android USB Host API driver solution (NO root permission needed) for connecting PL USB-to-Serial devices to Android-powered devices with USB Host API mode support. The PL Android JAVA driver library allows customers and developers to write Android applications to interface their PL RS-232/UART devices with millions of Android USB host devices like Smartphones, Tablets, and Smart TVs.     Download: PL Android USB Host API SDK (vb) Requirements: --------------------- - USB Device with PLHXD, PLEA, or PLRA controller chip    NOTE: PLHXA and PLXA are not supported (Discontinued Products) - Android-Powered Device (Tablet/Phones) with USB Host Mode API Support - Android 3.2 and above OS versions Product Applications: Single-chip upgrade solution for Legacy RS232 devices to USB interface USB to RS232 converters/cables/dongles Healthcare/Medical USB Interface Data Transfer Cable Personal Infotainment/Media Player Docking USB Interface Cellular/PDA USB Interface Data Transfer Cable Serial-over-IP Wireless Solution USB Barcode/Smart Card Readers GPS/Navigation USB Interface Point-of-Sale (POS) Terminals/Printers PC Docking Station/Port Replicators Industrial/Instrumentation/Automation Control USB Interface USB Modem/Wireless/Zigbee USB Interface Description: This is a newly designed product, using the Taiwan prolific production company PLHXD chips, PLHXD perfectly compatible with win XP/VISTA//Android OTG. The PL-HXD is a low cost and high performance USB-to-Serial Bridge Controller. The PL-HXD provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-HXD highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. Full compliance with the USB Specification v1.1 Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps. Supports RS422/RS485 interface. Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection. Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.