Watts rms high end

Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Total 40 Mosfets caps uF Soft start, Speaker Protection Watts RMS Mono Bridge Connect otal Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) Assembled Time 12 Days

400 Watt RMS Power MOSFET High End Sub Woofer Power Amplifier Board 400 watts RMS Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 1 Ready to Ship

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 10 Assembled Time 7 Days

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 2 Assembled Time 3 Days

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 4 Assembled Time 3 Days

400 Watt RMS POWER MOSFET Sub Woofer Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 10 Assembled Time 7 Days

Techno 4 Professional Power Amplifier 1100W/per channel at 8ohms 1800W/per channel at 4ohms 2200W/per channel at 2ohms Transistors used 2SA1943 2SC5200 Features - Techno Series provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start - Flow-through ventilation from front to back - Offered in 150W-1300W power area - High power toroidal transformer - Internal heat sinks with forced air cooling for rapid, heat dissipation - Dual fans for proper cooling to maintain performance and proper working levels - Suitable to various Input / Output Connectors. Has 3 Ways Sensitivity Switches for Stereo, Bridged Mono and Parallel Mono. Also connects swiftly to speakers VIA Speakon. - Can endure 8ohm, 4ohm and 2ohm loads - Highly reliable and stable - Noise Free product. - Less Distortion for better quality sound. - Excellent & Natural Timbre. - Crossover Selector in the 3U Techno Series to use with one or more subwoofer speakers.

high end sereies pma-500 looks like new excellent condition orginal japan,with video inputs..price 28000 neg 9446555403

Watt RMS MOSFET Stereo Hi Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo H i Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Powe r Supply -+96 volt Total 40 power Mosfet Transistors Speaker Protection and soft-start Stereo watts Bridge watts Mono Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (10Hz to 20Khz) Assembled Time 10 Days

800 Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the 800 Watt RMS MOSFET Stereo Power Amplifier Power rating of 800 Watts RMS into 4 Ohms Two Channel Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Assembled Time 3 Days

Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) Assembled Time 7 Days

700 Watts RMS Output at 2 / 4 Ohms. Volts. Output Level LED. 3 Way Tone Control. Horn / Speaker Switch. Force Cooling. Input Line 1V / 10K Ohms. Protection: AC Bi-Metal Circuit Breaker, Short Circuit & Over Temperature with Visual LED Indication. Power Supply: AC 220v 50 Hz. Dimension: 483 (W) x 425 (D) x 155 (H) mm.   Weight: Kgs.(approx.)

HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

1 x 1" silk dome tweeter with Damping & Ferrofluid 1 x 6" Polycarbonate cast basket with doped paper cone for mid 2 x 6" Polycarbonate cast basket with coated paper cone for the LF 18mm MDF multi chambered cabinet with flared port Frequency Response 40Hz-20Khz Crossover Frequency - 3.5 Khz Impedence - 8 ohms Continuous power - 80 watts Short term power - 125 RMS 8 ohms

Stereo Amplifier Module based on TDA7379 Compact PCB based on TDA7379 Supply Voltage operating maximum DC 22 V  HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD ALSO AVALABLE 6 Channels of TDA7379 (3 IC in single board for 5.1 setup). Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.