Xbee wireless

DESCRIPTION ABOUT This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. FEATURES AND USAGE This is the XBee WiFi Module with wire antenna from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of , the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee WiFi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other. As a member of the XBee family, the XBee WiFi combines hardware with software for a complete modular solution. XBee WiFi modules are designed to communicate with access points in existing infrastructures. Developers can use AT and API commands for advanced configuration options. SPECIFICATIONS 3.3V @ 40mA 250kbps Max data rate 2mW output (+3dBm) 400ft (120m) range Built-in antenna Fully FCC certified 6 10-bit ADC input pins 8 digital IO pins 128-bit encryption Local or over-air configuration AT or API command set Application Ideas: Remote controlled Boe-Bot robot Wireless data acquisition Remote signal beacon for adventure seekers Remote industrial monitoring Lighting control Keyless entry INCLUSIONS 1 x XBEE WIRELESS COMMUNICATION MODULE (WIRE ANTENNA) We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU. Note: If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration. We highly recommendBuilding Wireless Sensor Networks as a guide for setting up mesh networks. Note: Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules. Note: If you are using these outside of the United States, please check with your local laws regarding radio communication. Note: Due to recent flooding

Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee Arduino Description This shield V03 can achieve a simple two crunodal ZigBee network，achieve wireless communication between Arduino ，and allows the Arduino to wireless communicate over a modified ZigBee protocol using the popular XBee module.
It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Package Info 1Pc X Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee Arduino Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review please have a look. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard 24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

Overview WBoard EX is a unique Arduino board with WIFI module, XBee socket, nRF24L01 + module interface, micro SD card interface, electronic brick interface and ATmega32U4 chip. WBoard EX boot procedure is based on Arduino Leonardo. With WIFI module, the board can achieve wireless communication with TCP / IP protocol. Via XBee and nRF24L01 + or WIFI can be used for wireless control with functions covering from smart home to remote control to meet various needs of different projects. Documents Please visit our  wiki  page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials. Technical support For technical support, please open a ticket on  Itead Support System.

Ardupilot Mega  (APM) is a professional quality IMU autopilot that is based on the Arduino Mega platform.  This autopilot can control fixed-wing aircraft, multi-rotor helicopters, as well as traditional helicopters.  It is a full autopilot capable for autonomous stabilisation, way-point based navigation and two way telemetry with Xbee wireless modules.  Supporting 8 RC channels with 4 serial ports.    APM Features Free open source autopilot firmware that supports planes, multicopters (tri, quad, hex, oct, etc), traditional helicopters and ground rovers! Simple setup process and firmware loading via a point-and-click utility. No programming required! (But if you do want to fiddle with the code, you can with the easiest embedded programming toolkit available: Arduino) Full mission scripting with point-and-click desktop utilities Can support hundreds of 3D waypoints Two-way telemetry and in-flight command using the powerful MAVLink protocol Choice of free Ground Stations, including the state-of-the-art  HK GCS, which includes mission planning, in-air parameter setting, on-board video display, voice synthesis, and full datalogging with replay. Autonomous takeoff, landing and special action commands such as video and camera controls Supports full "hardware-in-the-loop" simulation with Xplane and Flight Gear 4MB of onboard data-logging memory. Missions are automatically datalogged and can be exported to KML Built-in hardware failsafe processor, can return-to-launch on radio loss.   Powerful Ground Control Software The ArduPilot Mega Mission Planner allows you to easily plan mission, or upload new firmware with only a few clicks of the mouse, enabling any user to easily get started. With the addition of a  Telemetry Kit,  you can track your UAV

  The ARM7 Development Board comes with NXP’s LPC2148 microcontroller. The microcontroller can be programmed through the serial port using the on-chip serial bootloader. The board features various interfaces available on-board like LEDs, Push Buttons, Analog Input, Dual-RS232 port, EEPROM, Power Amplifier, USB connector, Buzzer, Character LCD and dedicated connectors to plug-in a Temperature Sensor, Distance measurement sensor, Accelerometer, micro SD Card and an XBEE wireless device. A JTAG connector is also provided to enable programming and debugging of the microcontroller. The board can be powered using an external power source like an adapter or can be powered using the USB port on the computer. The ARM7 Development board has been designed for optimal use of the peripherals on-chip and interfaces on-board to create a variety of applications. Features An on-board NXP’s LPC2148 microcontroller with ARM7 architecture. A power jack for an external power supply from 8 to 16V AC/DC. Alternatively the board can be powered through the on-board USB connector. A 16x2 Character LCD interface operating

Description: The TX is an ASK transmitter module.The TX isdesigned specifically for remote-control, wireless mouseand car alarm system operating at MHz.The RX is a miniature receiver module that receives On-offkeyed (OOK)modulation signal and demodulated to digital signal for the next decoder stage.The RX is designed specifically for remote-control and wireless security receiver operating at Mhz. UART TTL o/p - Baud Rate - . Features: Input Power supply - 5 Volts Compatible for Both RF Mhz Interface upto 8 Bit Data. UART TTL o/p - Baud Rate - Package Includes with RF Tx Rx. Indicating LED's. High quality PCB FR4 Grade with FPT Certified.     Package Contains: RF TX RX with 8 Bit Encoder and Decoder. Billing: Xbee Development Board(RDL/GRS//V1.0) VAT Bill is included. Rules and Regulations: All Items

The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC modules. These modems work as a serial (RX / TX) pipe. Any serial stream from to bps can be passed seamlessly from your computer to your target. DESCRIPTION The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC modules. These modems work as a serial (RX / TX) pipe. Any serial stream from to bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3 V up to 6 V for easy battery attachment. All signal pins on the remote unit are 3 V 6 V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires. And now, we provide HC-, HC- could be setting to Master or Slave by user. HC-06 just is Master or Slave that could be customized. This module default is HC-06 with Slave mode. Note: Be paired must Master devices and Slave devices each other. Master and Master devices, Slave and Slave devices can't pair each other. The HC - 06 (just supply slave mode and more easy) Slave mode could paired with PDA, PC etc. Specifications: -- Bluetooth protocol: Bluetooth Specification v2.0 + EDR -- Frequency: 2.4 GHz ISM band -- Modulation: GFSK (Gaussian Frequency Shift Keying) -- Emission power: ? 4 dBm, Class 2 -- Sensitivity: ? - 84 dBm at 0.1 % BER -- Speed: Asynchronous: 2.1 Mbps (Max) / 160 kbps, Synchronous: 1Mbps / 1Mbps -- Security: Authentication and encryption -- Profiles: Bluetooth serial port -- Power supply: + 3.3 VDC 50 mA We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/